(Slight Nute burn this week so flushed with PH 6 water and dropped resevoir PPM from 1000 to 800) About 2-3C difference between ambient air temperature and leaf surface temperature (24.5-25C) . No defoliation, just pushing larger fan leaves down. Tying down branches to keep canopy flat. Light: Red/Blue/2x full spectrum CREE COBs (+IR and UV supplementation) At plant canopy = Avg. PPFD 770umols/s/m2 ~ Lux 25,000-35,000 ~ Daily Light Integral 50-55 Crop control: Infection control practices i.e -PPE, Alcohol Hand wash -Gray room outside tent, -Carbon filter -HEPA filter -Plasma Ionizer -Inline UV-C germicidal bulb Ed Rosenthal -Zero Tolerance on hand if needs be too. Hopefully to avoid ever needing chemical pesticides.

Ladies and gentlemen today is day 80 and as you can see, we still have a ways to go.. As always I'd like to thank Zamnesia Seeds and Plagron for putting this contest together 💚 .. as you guys can see, this girl has got some size to her especially for being in a smaller pot .. she is a little low on nitrogen but I don't think she has more than 3 weeks left so i'm kind of torn as to whether or not I should hit her with some .. i think next feeding, I'll give her a little nitrogen, and then that'll be it. Aside from another feeding or two of green sensation, then we flush .. i hope everybody's doing well and so are there ladies 🙏 .. god bless everybody and happy growin ✌️

So.. still getting FATTy! I changed the cob, cause i needed to lower temperature.. Now im testing a QB x 150w LM301H + 3500k660IRUVBlue I just ran out of solo tek-bloom, so im using biobizz.

Hey everyone! 👋 Another week and another update, and in this week I finally flipped my babies! (and it wasn't a failed attempt) 😍 They are now in the 12/12 cycle and I must say last week's recovery was crucial to finally do it! Besides of all that this week was quite uneventful compared to the other ones (which I suppose is a good thing! 😝) The only things worth mentioning besides what I already wrote is that I overfed my babies (double dosage) but it seems they took them well and that Boomer and her sisters (specially Boomer) get thirsty really fast compared to before... which means I need to water them more frequently which isn't terrible. I also finally have some new time lapses 😊 I hope you all enjoy them! Thanks for reading! 🙌

MIMOSA by ROYAL QUEEN SEEDS Week #22 Overall Week #5 Flower This week everything going good she got a sweet smell to her that's amazing her bud are starting to get thicker. Overall she's doing 👍 good this week!! Stay Growing!! ROYAL QUEEN SEEDS MIMOSA

Is she ready to harvest ?

Still not touching the plant or setup and just letting it be pretty much. Did a full tank water removal and started to add some Calcium Magnesium as I'm seeing some deficiencies on the leafs. So far this setup has been incredibly easy, haven't had to do anything, no topping, no training, etc. Could have used a scrog to keep the main branch a bit shorter but it looks like it should work out.

2023-03-15 Please add one more Week in Flowering!- i was in Holidays here This one is kinda perfect strain for me growing vigor and sweet, getting great Strucutr, no Training needed Just love , water and nutes and good Conditions in Light and VPD, made her outstanding I LOOOOVE her Colors in the End, and she smells fbulous, quite Zkittley with alovely Piny undertone, and some Kush Notes. Iam very courious to her taste and effects

Em atualização

420Fastbuds FBT2311/Week8 What up grow fam. I hope all is good with everyone. Week 8 update on these absolutely stunning girls. They're definitely progressing nicely with the flower sites swelling up. Super frosty and beyond sticky when you happen to touch them. Over all Happy Growing

In 21 i defoliated and do lst LETS see the progress Day 22 - recovered for lst Day 23 - Lst adjusting Day 26 - Niceee

Day 77. Harvest day for that amazing plant. Dry trim chosen. Will update after drying. Thank You Zamnesia for that chance ! Day 86. Girls has started curing process. Happy Growing !!!

En ésta ocasión tenemos la suerte de probar una RED POISON AUTOMATICA DE SWEED SEEDS 🔥 Esta maravilla es una Hibridación entre una de las variedades más apreciadas de su catálogo, la Green Poison®️(SWS14), y una exótica genética autofloreciente de flores moradas y ancestros Kush pakistaníes. Red Poison Auto®️ (SWS39) crece con aspecto de híbrido índico-sativo. Demuestra un gran vigor híbrido desde los primeros estadios de crecimiento. Desarrolla un tallo fuerte y ramas laterales largas y flexibles. Produce grandes cogollos compactos cargados de aromática resina. Los aromas y sabores son muy agradables e intensos, dulces y afrutados con un fondo suave de Skunk. Con esta descripción oficial de la propia página de Sweed Seeds se nos hace la boca agua con solo leerlo. Iremos viendo el transcurso de esta pequeña para ver en lo que se convierte de aquí a 3 meses aproximadamente 😊👌 Día 1: Hemos germinando la planta en un mini-invernadero con una luz LED de 20W, con 28°C y una humedad del 60%. Día 2: La plantula ha salido y hemos transplantado al armario y a su maceta final. Una maceta de 7L con una mezcla de sustrato de Top CropComplete Mix y Biobizz Light Mix en una proporción de 70/30. Todas las maceta tienen 3mg de Micro Vita para protegerla de las plagas. Hemos regado con 1L de agua con 1ml de Deep Underground de Top Crop (enrraizador) para que empiece a crear el sistema radicular lo mas fuerte posible. La temperatura en el armario es de 30°C con una HR de 60%. El armario tiene incorporado un humificador 🔥 Día 3: Estoy usando una bombilla de sodio de 400W en un armario 1x1x2 con lo cual emite bastante calor y las plantas se secan bastante rapido. Estoy intentando subir la HR al maximo con ayuda de un humidificador y con agua pulverizada para mantener el entorno en un punto optimo pero es una tarea difícil. Hemos vuelto a regar las plantas con agua 💧 pH6 a 30ºC con 200 PPM. Día 4: Sigo trabajando en mantener la temperatura y humedad en unos parametros optimos, por el momento tenemos: •Día 30°C y 50-60% HR •Noche: 26°C y 50-60% HR

Hello, again in touch Russian grower. Today my girls 70 days, 10 weeks. The fruits make me very happy, and the smell knocks me down. Soon I plan to make the harvest Bubblelicious Auto, my patience is not enough, and in appearance we can say that this is a full Mature flower. Despite the additional air filtration and automated odor neutralizers for bathrooms, the smell is coming out the door. But it remains to endure quite a bit, so I'm not afraid. The most difficult is behind, but a lot of pleasant in the future. Bubblelicious Auto - The smell of these plants has become simply stunning, like a hammer blow to the face, I hope the quality of the final product will not be worse. They look like beautiful porn Actresses 😍 In the microscope I see amber trichomes. Neville Haze Auto-lives up to my expectations. They do not have enough space for full flowering, but soon they will be spacious. Because of their neighbors, I can't really smell them. The plant is very cheerful, progressing, but I think it will bloom for at least three weeks. I also have some good news, mail delivery brought me measuring instruments, so now my diaries will be more accurate. I Express my gratitude to all those who follow my progress and support me. Your moral support is very important to us. I'm not going to stop, and promise to please you with new and more interesting diaries. Hope all goes well and the police pass by me! 😎

Bloom 37 The weather is starting to get colder. Unfortunately, I cannot raise the temperature. but it's still going well for now. next watering overdrive.

Got some sealant to properly seal my DIY CO2 generator and lil maggie seems to like it. Her buds are starting to swell up. For the CO2 generator I did the following: 2 Liter Bottle -> 1 Liter Bottle -> Fan (Fermenting) -> (Water Filter) -> (Distribute) Ingredients: Sugar - 3/4 Cup Yeast - 1 Teaspoon Water - 6 Cups Step 1: Add 6 cups of room temperature water to the 2 liter bottle. Step 2: Add 3/4 cup of sugar to the water and mix until sugar is fully dissolved. Step 3: Add 1 teaspoon of yeast and let sit until bubbles appear in water filter bottle. 
Step 4: Direct the end hose to the plant canopy. CO2 is heavy so it falls, use fan to blow it to the plant canopy.

Todo bien en general con este seguimiento.

Hi o.O