Weather is starting to get warmer finally and now we can see she start growing little bit. Nothing issues or anything just little bit worried if she start flowering like in next week cause its already 3 weeks veg to autoflower. 😊

Hey! It looks like I have decided on my plans for the current cycle - this time I want to get a regular-looking bush with a pronounced central cola. Therefore, minimum intervention, maximum observation😎 In the meantime, everything is going well, we will soon enter the pre-bloom. Glory to Ukraine! 🇺🇦 Stay connected and take care of yourself! 🙏

make the strongest

Last week before the flush

Checkout my Instagram @smallbudz to see the Small budget grow setup for indoor use, low watt, low heat, low noise, step by step. 01/11/2019 - Started using BioBizz Alg-a-Mic on spray, using it once per day at lights off, 1 or 2 puffs to create a light mist, only on non feed days, I mixed 0.1ml on 100ml water 6.4 PH. 03/11/2019 - Gave her 250ml plain water with 6.4PH 05/11/2019 - Gave her 0,15ml of each BioBizz Grow, Max and Bloom on 300ml water 6 PH didn't manage to get it higher to 6.3 at least. 06/11/2019 - She started to show some pistols, probably entering pre-flower. 07/11/2019 - Soil was to dry due to 2930c temps gave her 0,500ml of 6.5PH water with 0,25ml Grow, 0,25ml Max, and 0,45ml Bloom BioBizz.

Hi guys ! Wow this grow is going just so well ! The smell is already really strong , a fruity skunky smell invades my house ( luckly i dont have nearly neighbours ) wich i like a lot ! They are just cobered in trichomes and starting to get fatty ! Let me know ur thoughts guys ! Happy smokes !

Hello to all my friends and usual visitors. Thank you for stopping by and all the likes and comments....you are the best! 😎 Everything goes according to plan i started adding PK 13/14 to the mix this week, the plant is in good condition and seems to recover nicely. The excellent Mars Hydro TS 1000 is kept at 33 cm from the top of my plants is is running on full power. TS 1000 gives a full spectrum of light to the plants and you can see that...the leaves are lush green and develop without any hindrance, Mars Hydro did a very good job producing this lamp. Thanks to Mars Hydro for supplying the necessary equipment for this grow. That's it for this week folks, have a wonderful week and please come beck visit in three days time. 🙏

Day 22. Strawberry Ice gave my friend a lesson - i told him to rotate plants, but never thought of a need to explain, that pot don't have to touch heater ! Her roots boiled a bit, but 3 days later she is more than fine ! Candy Kush is catching up, top 3 nods are healthy, bottom don't go worse and she will be good I say in a week time. Rubbed Great White into soil and pure Phed water. 6.5 is my target always. Day 25. Back on track ? ;) Pure water. Strawberry Ice 600 ml( think next watering to top her) , Candy Kush 400. Happy Growing !!!

I'm happy :) I couldn't do it as it should have been, my ph meters broke and ruined everything :( well, but I'm very, very satisfied with the result :) a big thank you to my teacher :)@AsNoriu you are super :) without you it wouldn't have been possible :) I learned a lot of useful information from you :) the house is full of lemon aroma :)

Hello Growmies! 🌿👋 Welcome to Week 17 of our Epic Buzz journey! We're observing some noticeable progression in our plants, and we're nearly at the finish line with the next entry poised to be our final harvest week! Here’s the breakdown for our Epic Buzz phenotypes: Pheno #1 is thriving with its buds thickening up nicely, showcasing a frosty appearance that promises high-quality resin production. Pheno #2 remains a bit smaller in comparison, yet it's catching up with an increase in bud density and trichome development. Pheno #3 stands out with its robust growth and resin-packed buds that are slightly ahead in terms of maturity compared to its siblings. As we approach the harvest, maintaining optimal environmental conditions—consistent humidity and temperature—is more crucial than ever to maximize their potential. Stay tuned for our final week's update, and as always, stay lifted! 🚀🌱

Pulled down side branches using Twisties. Will be putting her on to flower soon.

She is so heavy had to lay the plant on its side to cut and remove trellis so her branches and even main stem did not split. Sticky as she can be, had to clean hands and trimmers (eyes once lol) many times for just a light trim. Easy trim Excellent plant Fast Buds Dried quickly, humidity has been low and we kept plenty of air flowing around and through her did not want to take chances with that big bud. She is real dry we can rehydrate any buds that go into cure, not a priority as this girl is set for edibles.. 485 grams final weight Weight modified down to 451 due to waste of 34 grams

Die Amnesika ist was feines. 51g trocken habe ich geerntet. Sie duftet wirklich sehr lecker. Ich bin aber schlecht darin Aromen zu beschreiben. Die Wirkung mag ich auch sehr. Sie ist aufjedenfall sehr stark. Lässt sich gut rauchen. Schmeckt gut. Werde ich wieder anbauen.

This plant had a 2 week veg time and yielded insane buds

Total Days: 70 Flower: 31 Vege growth is stopped or very slow at this point. Might eke out another inch or two. I'll raise the lights as far as they can go soon (only 3-4" for the 650w light on right), but with the higher operating RH%, I've yet to see any pistil burn. The light cycle shift to accomodate the painters definitely stressed 2 plants. One was removed. The second i am retardedly going to keep. I stripped off lower weak buds that had the nanners. Pruned a few weak axilla, too. The nearby plant pistils are lily white, so it should be fine. The pistils will be changing color soon, so that will no longer be a good way to assess the risk going forward. Meh, I know it was caused by light stress, so any seeds not selfed I'll probably keep them. Overall, I'm relatively happy with development. Need to adjust some procedures in next cycle and maybe a few more tweaks in winter 2025-1. Second irrigation went well, but i did find a partially clogged emitter. Probably a plastic bit from hold-punching. With 8 emitters per pot, the overkill makes it irrelvant and the pot wasn't the slowest to finish. A few emitters has some roughly milled inlets. I'll inspect them all over the next couple weeks and replace some as needed. Just realized my new dehum was glowing in my tent the entire time. Luckily the display was facing away but now has a cardboard flap blocking it. If it was fine before, it's even safer now. Photons had to bounce of a wall and travel 5' before it could hit any plant. ----- Early update before end of week upday: So, I've been procrastinating replacing the irrigation setup. It's slowly gotten worse each year (3rd ongoing), but never had the dripper devolve into a dribble. I've been hand-watering 1 or 2 pots the last week or so. Replacing the mini sprinkler heads only fixed 1 of the problem-pots. Think the fittings are leaking on the one that did not improve. All the pvc is gone. All the 1/4" manifolds and tubing are gone. The per plant adjustable nonsense is the worst idea ever as all it does is cause pressure changes and endless tweaking of all the little sprinklers, because changing one impacts all the others, or a speck of dirt might cause a new imbalance that requires adjustments etc - Fucking nightmare of useless repetitive behaviour. Still have the 3/4" ID lead-in, heavy duty, 450psi graden hose with ball shut-off valve and pressure regulator. That is now connected to a 3/4" wye with two 1/2" irrigation tube adapters attached to each end. This forms a loop around the pots with a 1/2" tee per pot that leads to a gate shut-off valve and eight 2-gph pressure compensating emitters - 96 in total. Will do first test run on Sunday. The great thing is that this is all plug and play when I switch to injectors. That'll require some sort of pvc manifold and check valve at the utility tub, but otherwise just connect hose, and it's golden. That's the next step. I'll also re-incorporate the wifi-enabled solenoid valve at that point. Getting rid of the 55-gallon reservoir and pump would be nice. One less thing to maintain (rez) and less things that can break down (pump / powerhead). ------ Sunday Test Flawless first run. Time will tell if they are resistant to clogging, but optimistic at this point. 18psi operational pressure at the irrigation loop. Didn't even need the regulator. The mesh strainer at the pump intake doesn't have the typical, small air-bubble, so the last setup was letting a little air in. The last setup was fatally flawed. Pressure compensating emitters for the win. They didn't even squirt wildly as the air was expelled from empty tubing on first run. Took ~4mins or so. Some pots finished a bit sooner, but that's because they don't drink as much per 24 hours. I can live with that kind of waste. I'll get the timing down to reduce water usage even further. I don't need to wait for every pot to exhibit runoff as that is beyond 10% runoff needs. Might be able to get 4 fertigations before refilling reservoir instead of 3. We'll see. I don't like the minimum ~12-15 gallons sitting over night. It fouls the reservoir faster at low volumes. Anyway, super geeked. They better not clog easily, lol....