Likes
Comments
Share
@Unkraut
Follow
another resin monster from seedstockers, with a very special scent, full of flavors! grinded it smelled like peppermint, and vaped it has a great sweet creamy taste!
Likes
13
Share
Likes
62
Share
@Roberts
Follow
I am dropping a Do-si-Dos auto from Zamnesia seeds. I lightly scuffed both ends, and dropped it in a glass of water.in 24 to 48 hours when it starts a tap root. I will then drop it in rockwool, and dome till sprout. 🤞🏻 for a great grow. Thank you Medic Grow, and Zamnesia seeds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
14
Share
@Mr_Dior21
Follow
Man this week has been taking forever, my theory is it will only get slower relative to harvest just because my excitement. I top dressed with about 2 inches of worm castings with an eyeballed mix of 2tbps of bone meal (3-14-0, bloom fert.), 1.5-2tbps of Gaia green all purp.(4-4-4, I don’t have an actual potassium fert. Like leingbenite So I use this), 3tbps of dr earth kelp meal (1-.05-2 has many different vitamins, amino acids, carbohydrates) and 2tbps of mykos (for microbiology inoculation and nutrient uptake/upkeep). So I every time I water I have this old 2gallon water tin that I usually fill up about a quarter to half way full. Using this amount of water and the 5 gallon bucket of my soil mix makes my watering schedule once every 3 days (on average). I do use bottle nutrients but it’s mainly for the supplementing. For feeding I use 2-3ml to half a gallon for all bottle nutrients, I have never gone over, and I have never had deficiency’s that can hinder plant development. Deficiency's: PSA: Now if anyone happens to read and actually look at my plants please do look closely and maybe let me know if you see something that I have missed since I’m still very new. I noticed my plant was having a cal mag issue so that’s why I top dressed with worm castings, I also top dressed with about 3tbps of azomite (I feel using azomite it may help with all those unnoticeable deficiency’s that a new grower might miss). I’ve been noticing on some of the leaves the very tips are showing discoloring, since the color is still so vibrant mostly I can rule out nitrogen, phosphorus, Iron, manganese, and sulphuric. It’s still very early stage so I did an extremely light foliage feeding (in the dark to prevent UV damage) of 2ml of big bud, big bloom, and tiger bloom, mixed into half a liter of water, I then emptied the spray bottle and sprayed with tap water just to make sure there’s no nute burning. Today I fed the plant through water amendments with 3ml of big bud, 3ml of bud candy, 3ml of big bloom, and 2ml of tiger bloom;(my theory is hopefully the nutrient deficiency’s will go away) My soil mix is pretty basic. 40% coco, 10% perlite, 10% well composted chicken manure, 20% black gold compost, 20% worm castings. I’m not going to put the fertilizer amendment percentage to be honest I eye ball it but there’s a rough general measurements that I do.
Likes
170
Share
👉Alrighty Then👈 63 days in flipped at 28 days 👉Halfway there 👈 It's been a great week all plants are killing it ......... 👉we are now in full flowering 👈 There all gonna get a slight defolation over the next few days to let air and light get in there which seems like I'm doing just about every feeding 👈 👉So I topped all but Babba Kush and Slurricane they didn't require it ... 👌 Got some nice level tops 👌 I've now started there full flowering nutrients program , so we are set to go ...... Persian Pie from Greenhouseseeds Full Gas from Greenhouseseeds Babba Kush from Greenhouseseeds Rainbow Melon from Fastbuds Papaya Sherbet from Fastbuds Weddingcheesecake FF From Fastbuds Purple Oreoz F1 From Seedsman Slurricane From Premium Cultivars Soil by Promix Nutrients by Cronks Well this should be fun 🙃 Thanks to all my growmies out there for stopping by its much appreciated 👈 👉Happy Growing👈
Likes
59
Share
Likes
5
Share
1st day of week 7 fresh air exchange, deleafed to get more light and airflow then fed. 3rd day of week 7 fed just water (Ran out of feed)
Likes
4
Share
7.8.25. 10th week of flower started on 7.7. Harvest is Sunday can’t wait to chop this one down and start new grow! Only using sweetener and cal-mag-iron to finish up. Thank you for looking at grow have good rest of week! Sweetener- 2.5 ml Cal-mag-iron- 2.5 ml Ppm- 190 Ph- 6.36
Likes
5
Share
Slow week not much going on made a tea at the end of the week using root organic player pack looking forward to seeing how they react to it
Processing
Likes
14
Share
So langsam kommen die kleinen in Schwung. Riechen schon sehr lecker 😅 heute wurden noch ein paar Triebe von unten weg genommen. Ab jetzt in der interessanteren Phase werde ich auch Close up Bilder machen. Schönes Growen euch allen. 😊🤗
Likes
4
Share
Hallo zusammen 🤙 Sie wächst sehr schön und macht keine Probleme. Rabattcode für den BIOTABS-Webshop https://biotabs.nl/en/shop/ GDBT420, damit erhalten Sie 15 Prozent
Likes
28
Share
Our Lavender is a recent creation by Seeds Mafia that we are cultivating with love and is starting to get serious. autoflowering like this. She is very well and very fit. We started with growth fertilizers that we give in small doses together with the rooting agent throughout the vegetative phase. Music of the week provided by Radio Nula from Slovenia. https://radionula.com/ Thanks to the friends of Seeds Mafia try this and their other creations seeds > https://seedsmafia.com/en/ Light and tent > https://marshydro.eu/products/marshydro-sp3000-led/?lang=it
Likes
16
Share
@Naujas
Follow
girl, from the beginning she was watered with water from the tap, the value of which is almost 350ppm. and a lot of lime, which prevents me from growing it bigger, but I'm happy with the result :) it's a small pot and only 50 w :) the flowers look very beautiful and sticky :) super ​
Processing
Likes
29
Share
@Grey_Wolf
Follow
Ginger Nut Cookies and Aussie music videos week six Thursday 6th feb 2020 Hi Growers well I decided to bite the bullet and attempt some LST and topping , I gently bent it over and tied each branch down to a predrilled hole in the pot with some soft wire. I then topped each node that was showing. If any one has any extra tips or advice on how I should go about my training I would welcome it as I am still learning . This girl is definately showing some Indica dominant characteristics about her and looks nice and healthy. I will continue to train the branches as they grow and tuck fan leaves that block light . Now for the Music Videos ###### This Week I chose two songs from two different Music Videos and two different artists both spreading the message about Reconciliation and land rights for our Indigenous Brothers and sisters here in Australia . This is something I feel is very important and is still a major issue over 200 years later. The first song and video is from Yothu Yindi which is an Aboriginal based group with their hit song "Treaty" heres the link for that video https://youtu.be/Jf-jHCdafZY and their is a brief snippet of it above in the pics and vids for this weeks update. Song and video number two is from a Group called Midnight Oil and this one is also all about giving back to the Indigenous. And basically giving them the oppurtunity to make decisions for themselves based on their own culture and beliefs and not what the politicians say they should. Here is the link for that one I hope you enjoy https://youtu.be/ejorQVy3m8E I will be back next week with another growth update and more Aussie music Videos 👍 Grey_Wolf 6th Feb 2020
Likes
7
Share
One more week till chop. Huge dense nugs with high resin levels and LOUD terps.
Likes
10
Share
LSD Zamnesia Tripping 🙂 | Fresh Frozen, Ice Water & Temple Balls — Week 16 From Seed First of all… Yes 😄 We are once again dividing the harvest reports into multiple chapters, and once again we apologize for that. But honestly, there was simply no way to fit: * harvest, * drying, * trimming, * curing, * smoke review, * macro photography, * fresh frozen work, * washing, * extraction, * and hash making… …into a single GrowDiaries update without rushing through important parts of the process. And this part? This part deserved its own spotlight completely. Because this week was not about flower anymore. This week was about resin. Living resin. Fresh frozen material. Ice water extraction. Patience. Cold temperatures. Sticky hands. And slowly transforming trichomes into beautiful hash. For everyone joining only now, quick recap: These LSD girls were grown under 12/12 from seed from the very beginning. Minimal training, mostly natural structure, gentle leaf manipulation, and environmental balance instead of aggressive intervention. Part of the harvest was dried traditionally and already covered in the previous report. But another part… …never got dried at all. Straight during harvest, selected flowers were removed fresh from the plants and immediately vacuum sealed before going directly into the freezer. No drying. No curing. No waiting. Fresh frozen. And that changes everything. The goal here is preservation. When flowers are frozen immediately after harvest, a large portion of the volatile compounds: * terpenes, * flavonoids, * aromatic compounds, * and delicate resin characteristics… …can remain much closer to their living state compared to traditionally dried material. This is why fresh frozen extraction became so respected in modern hash making. It captures a version of the plant that only exists for a very short moment in time. Alive. Wet. Fresh. Fully expressed. And honestly? Opening those frozen bags weeks later felt like reopening harvest day itself 😄 The flowers still looked incredibly resinous even after sitting frozen for weeks waiting for wash day. Now let’s talk process. For the wash itself, we used the Bubbleator machine courtesy of Zamnesia , and honestly huge thanks to them for providing it. They knew I wanted to start exploring ice water extraction properly, and they were kind enough to support the journey. The setup itself is actually beautifully simple. First: ice. Lots of ice 😄 The machine was filled partially with ice first before adding the fresh frozen material inside the working bag. The flowers themselves were placed inside a closed 220-micron washing bag. This is important because the bag keeps the plant material contained while still allowing the trichome heads to separate during agitation. After placing the material inside: * more ice on top, * cold water added, * everything submerged, * and then… …we waited. Around 30 minutes or so. And this step is actually extremely important. A lot of people think washing starts when the machine turns on. But honestly? The wash starts before that. This resting phase allows the frozen material to: * slowly rehydrate, * absorb water again, * become fully saturated, * and most importantly… * become extremely cold throughout the entire plant material. Why does this matter? Because trichomes become brittle at very cold temperatures. The colder everything gets: * the easier the resin heads separate, * the cleaner the release becomes, * and the less physical force is required. That is also why ice exists under and above the material: * lower temperatures evenly, * protect the resin, * and maintain the cold environment throughout the wash. Once the water temperature approached near freezing… …the machine came alive 😄 And honestly? Watching the water slowly transform during the wash is always magical. At first: just ice, water, and flowers. Then slowly: foam, cloudiness, resin separation, and finally that beautiful milky golden water hash makers love seeing appear. Meanwhile on the side, we prepared the filter bags. We did not use every single micron separation individually because honestly sometimes over-separating becomes unnecessary depending on goals and material quality. Instead, we focused on collecting the grades we actually wanted to work with and enjoy. And then came one of the most satisfying parts of the entire process: Collection 😄 Slowly lifting the bags. Watching the resin gather. Carefully scraping. Separating grades. Observing texture and color differences. Beautiful creamy resin everywhere. Some lighter. Some slightly darker. Some sandy. Some greasy. Every layer carrying slightly different characteristics. After collection, the resin was carefully freeze-dried. And this part also requires patience. First freeze drying. Then breaking it apart. Then more drying. Then more waiting 😄 Depending on environment and conditions, full drying can take several days because trapped moisture inside hash is dangerous long term. Rushing this step can ruin months of work later. In this case, the process stretched closer to about a week before everything felt properly stable and ready to work. And honestly… This is where the magic really started. Once dry enough, we allowed the hash to rest briefly before beginning the hand-working process. No extreme heat. No giant pressure. No fancy machinery. Just: room temperature, body warmth, gentle pressure, folding, rolling, stretching, and patience. The room itself stayed around 15°C, which turned out to be perfect for working the resin slowly without overheating it. And this step matters far more than many people realize. When hand-working hash properly: * oils redistribute, * compounds begin merging, * terpenes spread through the material, * oxidation starts slowly, * texture evolves, * and curing begins transforming the resin itself over time. You are not simply “rolling hash.” You are starting a living curing process. And slowly… The texture changed completely. From sandy loose resin… to creamy material… to sticky dough… to smooth beautiful temple balls. Honestly, seeing that transformation happen in your hands never gets old 😄 Final result? Three temple balls total: * two smaller ones from smaller micron collections, * and one large main temple ball that became the true star of the session. Final weight: 46.5 grams.( big one ) And honestly? I was extremely happy with that result. Especially considering the quality, texture, color, and how beautifully this LSD washed overall. Once formed, the temple balls were wrapped carefully in parchment paper before being vacuum sealed for long-term curing. And now? They rest. Months. Maybe longer. Waiting. Because the goal here is not “fresh hash.” The goal is evolution. Traditional temple ball style curing allows: * oils to redistribute, * compounds to merge, * texture to transform, * aroma to deepen, * and the entire resin profile to mature over time. Almost like aging wine. Or curing cheese. Or fermenting traditional products slowly and intentionally. This is medicine with patience built into the process. And honestly… That part alone deserves respect. We also included: * detailed process photos, * collection stages, * macro photography, * texture closeups, * curing progression, * and multiple stacked macro images showing the resin in insane detail. Some of these stacks reached: * 62 frames, * 87 frames, * 114 frames, * and even 152-frame focus stacks. Because honestly, hash under macro magnification becomes another universe completely. The textures stop looking real. Tiny resin mountains. Oil rivers. Micro-crystals. Glossy surfaces. Soft creamy structures. It almost starts looking geological instead of botanical 😄 Mr. Baggy of course supervised the entire operation like the professional resin inspector he clearly believes he is. And next week… The final chapter arrives. Smoke review. Curing review. Flower review. Hash review. Terpene evolution. Effects. Textures. Lessons learned. Mistakes made. And final thoughts after this entire LSD journey from seed to cured medicine. And finally… Thank you. To Zamnesia for the genetics and the Bubbleator. To Plagron. To F.O.G. To all the LEDs, gear, and equipment involved. To GrowDiaries. To the community. To the OG followers. To the new curious visitors. To the silent supporters. To the skeptics. To the lovers and even the haters 😄 To everyone spending time sharing this strange beautiful plant journey with us. Wishing everyone: cold water, sticky fingers, healthy plants, beautiful resin, and enough patience to let good hash become great hash 🌱
Likes
1
Share
Another good week for the ladies with good growth. They are strong and vibrant with many tops starting to take form. With some of the taller branches I used HST by rolling the stem untill it bends basically in half, giving the lower branches plenty of time to grow up. Once they have reached past the scrog net I begin to LST by tucking branches under also making way for new growth. One more week with minimal training and mostly defoliation of bigger fan leafs before I'll flip to flower
Likes
Comments
Share
She stretched a little bit more in the last week, everything very healthy.
Likes
2
Share
@CalGonJim
Follow
7/28 2:34AM EC 1070. Ph 6, Brain broken, from mildly retarded to moderatly retarded now....too bad. PPDF was too much!!!!! dialed back watts and lowered lights. now at about 300. PPDF should be 200 - 300 7/29 10:04AM I found this channel on Rumble but pot stuff scares people...so dont be a dick, I try really hard not to be... sometimes i am but its my favorite channel now.... SeigeOutdoors 7/31 12:18AM NEW THEME MUSIC TO BE WEIRD ALL NIGHT 7/31 12:32 PM afternoon. I was gonna do some work and then I found the old 80s movie soundtrack legend and that’s gonna be great so I’m using Grok to make some themes for that. I think it’ll be fun. I’ll take care of the plants later 12 hours on this room set up. It’s pretty amazing. 8/1 10am Organo Republic email i got 8/2 2:40 AM five minutes from snap Frank Sinatra time can we play one for my babies it’s 2:45 in Blade Runner 2049 Jesus I have to explain everything
Likes
22
Share
E quasi la fine lascio andare fino a fine settimana per colorare i tricomi