They still seem to be growing, although going in the room twice a day, it is difficult to notice unless I look closely or compare photos with previous weeks. Going to cut off a couple small pieces of calyx's shortly and will post a couple pictures from my scope. Speaking of those, they're starting to give me some nice colours, slight purples, neon greens and yellows, the photos don't really do them justice under the warm lighting but I will try and take a couple pics in some white light when I chop her down in a couple weeks time. It is also quite difficult to illustrate the size of some of these colas, the one near the back on the right, is about 19 inches long, and about 4 inches wide. Looks like 2 ounces of bud hanging on her and I have had to lasso some string around it and a couple other colas as they were falling down. Bringing EC slowly down to around 1.2 - I think I will cut nutrient strength down to about 0.8 EC in a few days time to try and hurry her along a bit. I will only be flushing for 3 days at the end of this grow, they will also be in the dark for 2 days at the end with low temps (mid teens in ºC) to preserve terpenes, oils and other cannabinoids. Thanks for stopping by!

All going really well so far they popped out the ground and doing there thing I ordered a co2 bag that should be here in a day or so, and apart from that I m happy no signs of bugs or deficiency’s

6/29 I woke with a 100° fever again. All the other symptoms are fading so hopfully all this shit will be done with. I took some pictures and took a video. I was planning on FIMing or topping some of the Sour Moose but I decided to feed instead. The plants don't really look like they need anything which was why I was hesitant. I've fed once and due to the rain I haven't had to water. I fed the photos a pint each of 1tsp Grow Big and 3tsp Big Bloom per gallon. I fed the autos with a pint of 4 tsp per gallon big bloom. I'll check thing out tomorrow and see how it's going. I'm going to need to research autoflowers a little bit more and figure out what I should be doing feed wise if anything. My soil mixture is pretty hot and usually takes photos COMPLETELY through the veg state before showing ANY signs of deficiencies. 6/30 We are supposed to get a heat wave. It was 90° yesterday and it's pretty hot today. I decided to give the girls some water. The bags were still heavy but I wanted to make sure they got what they needed so I mixed up two gallons of water. I gave the clones like a powered bottle each which is 1.75 pints. I gave the rest of the girls half a powerade bottle. The bags were heavy so I didn't want to overdue it. The plants seemed to like the food I gave them. I also decided to FIM one of the Sour Moose. Everything seems to be looking good. I had to go around and tuck some of the branches on the clones under their cage. It went well and it seems like the plants are responding well. 7/1 Another very hot day. It's in the 80's topping at probably 90. Bags seem to be keeping their weight tbough. Normally I would be watering much more but the plants would be far bigger. I noticed two small leaves at the bottom of the 10th planet that have a septoria spot. I quickly exfoliated both bottom leaves that were affected and treated the plant with Plant Doctor at a rate of a half gallon to 1.5 tsp Plant Doctor. The extra 10th planet I checked also had several leaves infected with septoria. That plant was away from the cage and a dwarf so I just pulled it and disposed of it far away in the woods. If after another treatment of plant Doctor I see anything resembling septoria I will cull that one two. It's by far the smallest plant. Substantially smaller than her sisters. I'm not going to fight diseases this year. I went through everything and found a rolled up caterpillar on Rude Girl but luckily I was able to get the tip of the leaf off and dispatch the pillar that tried to escape. I'm hoping the FIM will take on the Sour Moose. Looks like it will. Boy these Autos are flowering like crazy! I watered everything. I mixed up a gallon and I had a half gallon already mixed up. I probably should've held off but everything looked dry despite being heavy. And this time last year I was watering like crazy. I need to research Autos a little more. I know they are significantly different and I'm sure underwatering isn't too good for them but I think they've got enough. 7/2 I held off watering today despite the ridiculously high temperatures. I'd rather underwater than overwater. These aren't like that plants I'm used to having this time of year. I'm used to having trees that are sucking up every little bit of moisture. These plants are significantly smaller and have received TONS of sheet rain prior to this heat spell. Since I watered yesterday (only a gallon and a half and a half gallon on the 10th planet) and the day before I decided against watering them again. Yesterday I just made a small ring around the plants. I've read that it's really easy to overwater autos. I went through everything again and everything LOOKS good. The autos are definately in flower. I'm going to feed when I water. Yesterday Banjo had a branch that looked like it was drooping a little bit but I watered it and now they all look happy. I hope they stay that way. I know it's supposed to be super hot today but I still don't want to over water. I also didn't want to treat the banjo auto with plant doctor. I know those plants are more sensitive and with the ONE spot on a very bottom leaf, I'm hoping that it is just something stupid that I can handle. Especially if I'm careful of how I water and I clean my watering can good. Maybe I'll put some mulch down or something to keep any spores that may be there from splashing up.. I don't know yet. I'll have to think about it. I'm also planning on feeding the autos the next time I water them. I guess it's time to give them a little bit of grow big with the big bloom and the kool bloom. Looking at the recommendation I read it said to feed the autos 2tsp Big Bloom, 1 tsp Grow Big and 1/8 tsp Liquid Kool Bloom. I know these are low does but I'm excited how they respond to the food. It will be nice to have a little early harvest. Even if they aren't real heavy yielders.

Here we are, the start of flower! From here I'll be uploading videos daily.

5x Tropicana Poison Fast 58.den 12/12 sklizeň 300w attis pro Hnojiva Shogun 90x90 secret jardin stan plus odtah a filtr taky secret jardin Plagron lightmix+kokos+perlit 11L květníky

Welcome growfessors to another episode of growfessor theatre! 👽🌳💚 Tonight from the 4x4 the ladies move into week 7 and they get a change in nutrients. Out with Big Bud coco & sensizym, in with Overdrive. Removed dead & dying leaves from each lady, added a support stake in Mandarin dreams & LSD, they was leaning hard! Thanks for stopping by growfessors 👽🌳💚

🌱 Week 3, Day 7 Update: Buds Are Blooming! 🌿 Hey Grow Fam, We're cruising through Week 3, and my girl is really coming on—buds are starting to form, and it's a sight to behold! The girl is growing so fast now, drinking 4.5L a day. She could even do with in-between waterings, in my opinion. She's aiming for the stars and shooting for the moon, getting bigger every day and stinking out my room. I had to tie my light higher up with some rope as it wouldn't go any higher, and shoots were getting way too close! I did SCROG when flipping, and I should've been a bit more strict on it (did it longer), but now I realize why SCROG is used. Imagine if I never used it—she would be way too tall. Overall, I'm so happy with how she is growing and can't wait to see the final product. :) But, as with any journey, we've hit a little bump in the road. Despite keeping our feeding consistent at 850ppm, the runoff readings have been creeping up. Last check-in showed a runoff of 1400ppm. It's got me thinking we might be dealing with a salt buildup in the root zone. To address this, I'm sticking with our feeding routine at 800-850ppm. If the runoff ppm keeps climbing or if our plants start showing signs of nutrient burn, I will adjust accordingly, but as of right now, I'm sticking to the same feed as she looks great! ( If I do begin to notice signs of nutrient burn (excess), I will try to water with a lower EC/PPM, like 700ppms, to bring it down. But if I don't get the results I'm hoping for, I will just flush the plant with 3x the media size of water (just plain pH water) to wash out any old salts and reset the medium. You don't really want to do this with coco depending on what stage your at in flower, veg on the other hand flush.? Sure!, if you really need to reset that medium go for it, (i do see tiny signs of burn but thats fine if it gets worse then i have a problem) Let's stay focused and keep our eyes on the prize—beautiful healthy buds. We've got this! #GrowUpdate #Week3 #BudsBlooming #KeepGrowing 🌱🌿

The final day of week 10 already! The buds are still getting fatter, the trichome development is still on it's way. I will check the trichomes twice a week and im waiting for around 10% amber. Nutrients and EC is lowered again this week, harvest is around the corner im sure of it! Hot summers are rough here, airconditioning is trying to keep the temps down. I quite like the phenotype. It has quite some node space making for an easier trim. Also the amount of calyxes is huge and the density to it is super compact as well. Fade is really starting to show and leaves are starting to fade.

Overall a great growing experience with FastBuds Gorilla Glue Auto from start to finish. She went 65 days and hit 27". Lots of big beefy colas. She always took to changes in nutes/environment well. End result is a bunch of smelly, sticky goodness. 380.8g wet weight. I'll update more once she's had a chance to dry... check back soon for dry weight and smoke report. Harvest Update: Ended up losing a lot more during my dry time than expected. Just barely hit two ounces of bud and about 17g of trim and popcorn. My wet weight did include a lot of stem whereas my dry weight reflects trimmed bag ready bud. But still... that's a huge difference! Still very happy with the results! The buds smell amazing, hints of pine and citrus in the smoke. Gonna let her cure up a bit and we'll be off to the races. I will definitely be popping another one of these off in the near future.

In

Things are going ok with this plant for now. Droops a bit now and then, but it's alright I figure. Depends heavily on how much water it has left.

Day 15 Update : Decided to grab a tape measure to check canopy heights on a whim and discovered that my light was hanging 35 inches from “Cellie” Cereal and Milk . Wowzers 👀! So I raised the plant to be 26 inches from the light that I also dimmed down to about 40% . It works out that I can try to get the most out of the end of flower stretch for the older gal who shall no more than be mentioned for reference to accentuate the great glorious glamorous “Cellie”. The humidity plummeted after I did a major defoliation of the older gals so I adjusted the airflow rate of the lower in-line fan and the upper inline exhaust fan with the carbon filter . I lowered them both to the lowest setting & the humidity returned to “normal” Let me explain my reasonings/thinking behind my adjustments which are experimental at BEST. It’s worth also mentioning without having to preset a single thing on my 70pint Dehumidifier located inside this tent it is legitimately only plugged into my PRESET humidistat controller which is set to 50%-46% RH WITH an alarm on highs of 55% and lows of 43% . In real life what this translates to is when this humidity controller triggers the dehumidifier ON @50%RH immediately the fan of the Dehumidifier begins running. However this does not help the rising humidity that is occurring (it will reach 55%-60.2%RH ). Given a fixed amount of time , the condenser(atleast what it sounds like . .again, it could be anything) turns on . It is when this “condenser” “sounding” component begins working that the humidity IMMEDIATELY plummets down to my low point of 46% So to make a long story short the humidity gets vacuumed to 46%RH & the dehumidifier turns off, bc of the PURPOSEFUL EXPERIMENTAL TWEAKING making all air exchange fans low leveled the humidity slowly but steadily rises to 50%RH then the dehumidifier is triggered on but only the fans initially and the humidity eventually reaches 55%RH-60.2%RH & then the humidity gets all its hair snatched out by the dehumidifier and drops back down to 46%RH. 😮‍💨😮‍💨😮‍💨😮‍💨 with all that said of anybody was even interested per my tents leaf canopy height temperature average good to great OR LITE GREEN TO DARK GREEN VPD for my temperature begins @ 60 & ends @ 52 which is kind of a perfect storm for OUR GIRL “CELLIE” oooooooorrrrrrrrrrr sssssssoooooo I think/hope . She still hasn’t needed watering since being transplanted, she should now ready and willing to stretch those toes and we need the opportunities to top water that soil a few times to make those dry amendments available to her . More pics of later the week coming as we go . . Hopefully . Diligence is a practice Day #17: giving her some water today, no specific amount just until she feels the right amount of “heavy”. She was given 3 different batches of water once ph’d to 6.3 once ph’d to 6.7 one ph’d to 6.5. She’s grown an inch in 2 days. Also swapped out the smart hygrometer system to a different brand . So far it has all the capability I was looking for but I need to run 2 more experiments to know for certain it lives up to my needs and its price tag 😁 Day 18 Update: she grew an inch taller nice 👍 The smart hygrometer system has reported/experience Bluetooth failures twice already(although I don’t know exactly what that means considering I purchased this for it’s Wifi capabilities ) I didn’t think to check it whilst I was away so I cannot yet say If it meets my final expectation/need I bought a soil ph meter & it indicates “my mix” is at 3.1 ph 👀 hmm 🤔 I’m wondering if this is a must fix or can I get by .eventually she will be transplanted and at that time I can use my new digital soil ph probe to construct her new blend moving forward but I am curious is I mixed another batch at 3 something ph would it matter ? In the beginning I wasn’t ph’ing any of my watering just because I assumed my soil mixture was highly acidic because of the 70ish pecernr peat moss base . I also assumed that it would be acid fixing for the water I put in it and therefore wouldn’t need to ph it and I did just fine just giving plain old tap water when thirsty until I experience VPD issues & in an effort to pinpoint what my exact issue was and how to fix it I of course eliminated all the variables and dialed in on my ph of my feed water and now my soil so it leaves me wondering does the soil need to be relatively 6.1 ph or is the 3.1 I’m flying at alright also . I checked the other 3 currently in here getting through flower & two of them are in the 3’s for ph & one of them is 6.2(the largest of them all) how ever she was the largest of them all always and oddly enough I mixed one big batch for them and transplanted them at the same time so I get two of them having the same ph as “Cellie” but the other that is in ph heaven is an oddball Should I top her here or supercrop later hmm I need to decide my vision for this thing Day 19 Update: ponytailed her youngest internode for about 16hrs she aggressively popped out of it twice ! It didn’t even work for 24hrs when I try it again it’ll be before the internode is so strong . Also rigged up a 16in oscillating wall-fan that currently being held with 2 zip ties , 2 rubber bands , & a smidget of duct tape and MAJORITY OF FAITH keeping it in place . The biggest plus to my added circulation is that I got the 16in fan for ! A win is a win . Pics uploads will be held for the next 3 days until the end of week 3 upload . Drop a thumbs up Day 20 Update : THE FAN FELL! But no one was damaged or injured . I re-rigged it . This time with duct tape , 3 popsicle sticks , 2 heavy duty zip ties & 1 regular strength zip tie . SHES SOLID NOW 😂 I did some solid rigging this time & have videoed my handy work . Also I forgot to turn my A/C back on before leaving the house so temps and humidity skyrocketed and swung for 9 hours until I got home . The temp in the tent was 84.4 and the humidity went from 42.4 to 57.5 to 42 every three mins. Day 21 Update : SHES A PRETTY GIRL. RQS says Cereal Milk is a slightly sativa dominant hybrid but the pheno of this particular seed seems to lean more towards indica I’m not mad at it ! I’m getting more stoked to see what she can do. She still hasn’t received any additional water since day #18.

11.02.: So far everything is well under control. temperature and humidity are well adjusted. We will see how it goes on. The gold juice is intended as food (sugar) for the microorganisms. Light intensity: 25% —————————————————————— 12.02.: Day 9! water values ​​checked: RO Water Temp. 18,1 degrees 015 ppm 5,7 PH water value After adding 0,5ml/1L CalMag (BioBizz) Temp. 18,1 degrees 054 ppm 6,3 PH fertilized with BioGrow for the first time. (3g/1L substrate) —————————————————————— 15.02.: Day 12! Today I drop the humidifier from 85% to 80% The plants now use the water relatively quickly. now has to water every two days. Before watering the pots had 125g and after watering 180g. Poured with RO water and 0.3ml/1L CalMag values: water: 028 ppm 19 degrees drain: 765 ppm 19 degrees The roots looking perfect! Soon the little ladies will be in their 19 liter fabric pots! —————————————————————— 16.02.: Day 13! Today I changed the light intensity to 37%. Everythig looking great. —————————————————————— 17.02.: Day 14! Today I repotted the ladies into their 19 liter fabric pots. Composition per pot: - 19 liters of BioBizz light mix - 55g BioGrow - Greenhouse Feeding - The roots were powdered with Rootmax and Bactrex. - 3 liters RO water (017ppm) (15% of pot) - 0.9ml Calmag - BioBizz (029ppm) - 3g BioEnhancer - GH Feeding (154ppm) Light intensity increased to 42% Room temperature 25 degrees 75% humidity ——————————————————————

And last but definitely not least, Mystery Made 2 starts to fade as well. From now on, not every single week but every single DAY, the colors get more and more intense... I'm totally in love with this grow

Absolutely stunning in all aspects at this stage, smells of diesel and citrus.

What can I say about this lady? Well let's see. She's sticky as hell. She's a 🔝 trichomes machine. Beautiful hard dense nuggets. Very spicy and piney aroma, very very strong, stinks my whole balcony. What a great a beautiful Gorilla strain man. Definitely will grow her many more times. Top Gorilla strain. 🦍👽💎 ❄️ Peace everybody! 💚 🌱 ✌️

small adorable deadly

Hypno Seeds knows what rules the world, so we created a strain to let everyone have their chance to try some Juicy Pussy Auto. An autoflowering cannabis cultivar that’s absolutely dripping in trichomes, potency, and flavor. It’s a Sativa-dominant strain due to its Thai Stick cross and is balanced out with some special Indica strains to give it its mellow, yet arousing effects and massive juicy yields of big hard nugs. Take a sip and enjoy! Tech Specs THC 19%-24% CBD 0.50% Flavor Orange Creamsicle, Pungent, Sweet Type 35% Indica / 65% Sativa Flowering 9 Weeks Height 120-160 Cm Effect Calming, Creative, Extra Sensual, Pleasant, Relaxation Genetics Thai Stick X Indica Strains --------------------------------------------------------------------------------------------------------------- Grow Sponsored by MARSHYDRO HIGH EFFICIENCY WHITE LED LIGHT: Newest SMD LED technology provide highest PAR/LUMEN output(743umol@18"), designed to replace a single-ended 250watt HPS; MARS HYDRO TS 1000W Plants Growing lamp makes you get 30% higher yield compare OLD blurple led lights, Max 2.0g yield per wattage (power draw) LOW ENERGY CONSUMPTION GROW LIGHTING : Consuming only 150W with 342 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 2.5x2.5ft,Max coverage 3x3ft. Over 90% light energy can be absorbed by plants; higher intensity and more even coverage in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS1000 SUNLIKE FULL SPECTRUM LED INDOOR GROWING: 660-665nm Red IR/3200-4200Knm/5200-6800Knm, infinite close to natural light, best for all plants all stages growing, rapid plant response from seed to flower and increase yield & crop quality‎ HIGH REFLECTIVE & NOISE FREE-Fanless LED GROW SYSTEM design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom Get your own at https://www.amazon.de/dp/B07ZVFBR34

Solo pequeños cambios no muy notorios, espero que ya vaya tomando mas velocidad a medida que termina la semana.