Recommended
Likes
Comments
Share
Starting the 2nd week of vegetation! So far everything is looking very good! The hydro plant is lacking behind a little bit, that's probably because of the low concentration of nutrients. So today I mixed a new batch with 2ml/L TA Organic Grow, which was recommended on the packaging for the growth phase. The roots look healthy, having reached almost the bottom of the jar already. Day 12: The diagonal leaves are starting to come out for the soil plant. Day 17: The hydro plant continues to fall behind. There is also build-up in the jar. I'll be switching to an anorganic fertilizer later today to hopefully stabilize the plant development.
Processing
Likes
2
Share
@Luv2Grow
Follow
Day 44 - The pot this morning was light as a feather so gave her a gallon of water and nutes today. Overall, she still stretching quite a bit each day. Other than that, just tucked some leaves again and letting her go. Day 45 - All is looking good and still no real issues going on. I did remove a few lower fan leaves that were dead but other than that, just put her back in the tent and tucked the leaves again. No need for water yet, will be another couple of days. Day 46 - All still looking good with her. She’s still stretching about 1/2” everyday so should be decent sized by the time stretching stops. She’ll need some water tomorrow or Sunday. Day 47 - Gave her a gallon of water and nutes today and I’m gonna see how long it takes for her to drink it up. I might have to up the intake to a gallon and a half depending. Other than that, I removed a couple big fan leaves in the way and placed her back in the tent for the evening. Day 48 - Seems like she budded up quite a bit after the watering and feeding yesterday. Maybe the stretching has slowed down a bit cause she only stretched a little less than half an inch. Hopefully now she’ll really start packing on and frosting up. I did remove quite a few fan leaves as well today. Day 49 - Ending week 7 and she’s coming along beautifully. Checked my intake and outtake exhausts and were pretty dusty so took all the plants out of the tent and did a complete cleaning of everything. Removed the humidifier to give a little more room in the tent and temps are rising a bit but sitting at 82. I’ll leave it alone for now but if it gets too much warmer, I’ll have to figure something out but humidity is right around 36 and buds are starting to boom now.
Processing
Likes
8
Share
@ElMetitor
Follow
Hello everyone, here we are also the sense is blooming, being a dominant Sativa it had a notable starching in these three weeks of pre flowering, the plant is 130 Cm tall, very considering the pot and all the training I applied to it, the plant has developed many seccondary branches and many internodes, I expect dense, robust buds, the plant has large and airy fan leaves, a long trunk with a bump on top, it also begins to smell a little, the climate was not mild, very intense heat 35 degrees celsius, a bit of trust but I hope that the wasps that roam around here take care of it, overall very nice tall emerald green plant. 😈
Processing
Likes
8
Share
Dat 1 of flush 6/1 20 gallon of water 25ml of floraflush 35ml of fishshit
Likes
12
Share
Another great week for the girls, I have not seen a single deficiency, other than the odd yellowed leave under the canopy, typically due to lack of light. I will come through soon and do a defoliation of both tents to allow for more light to penetrate, and perhaps get a good push for some girthy colas 😋. I have lowered the temps a bit in the tents by controlling my lung room temps, and they are maxing out at 77 degrees and hitting a night time cool of about 70. I have also lowered the humidity to hover between 47 and 52 %. Hopefully will start to get some nice colours as they finish. As I mentioned before, when I water is when I like to get under the canopy and check the stems and leaves for anything that shouldn’t be… and typically once a week after watering I’ll wipe down the tent and sanitize any surface I can. There is no reason to get lazy, that’s how you get Pests, Mold, and PM. Happy Gardening 🇨🇦👊❤️
Likes
12
Share
@Brixx
Follow
Day 19 of flower. Just defoliated. Wondering if I shouldnt cut out more branches. We will see how it looks tomorrow and decide. I am getting good light penetration even lower down. So we will see.
Likes
13
Share
@Canadian
Follow
plant has been very easy to grow the smell is very strong seems to have a week to go. The plant seems to have a very big buds all over their branches and it is maturing at a very high rate of speed the smell is to die for but you got to keep an eye on the flowering stretch because it's quite large for the those who have small spaces now I'm growing in a tent 3 by 3 foot by 8 foot so they don't have much space to stretch and become monster in my tent everybody's fighting for light and space so if this is grow outdoors with a Canadian long hours of light in the summer and a little bit of vegetable grows indoors maybe two months it will become a truly huge plant in the outdoors the grower only needs to protect the plant so it doesn't get stressed out and doesn't had more weeks to outdoor grow ,for sure for the 1st of October you should have a decent amount high quality flower. I will continue to update have a happy grow.
Likes
8
Share
Steady week , bit of defoliation to try and get some light to the bottoms too . Using a 300 watt phlizon which is a great light but not the largest of coverage . De humid working nicely which for the price is a very good thing
Likes
31
Share
This is my first induced flowering growth. I always grow weed outdoors with big satisfaction on yield and nature contact, But I have to say that training plants is real fun and I can’t wait to see the buds first appear and then fatten up. On day 5 of flowering she started to appear a little stressed, I think is a little overfeeding because her leaves are a little burned on the tip and a little underwater too but this morning end of day 6 appear to be recovering has the timelapse show on the end. Happy growing to you all brothers and sisters ☮️☮️☮️✌️🏼
Likes
1
Share
Likes
6
Share
June 7: Sunday Punch EV is an excellent plant. I’m very impressed. June 8: using the scrog net to keep the fan leaves from shading the growth tips. Loose scrog nets are great when doing a manifold outdoor. Very effective and easy. At this early stage just the weight of the string is enough so there’s no need to tie it down. June 9: video tip about making up for dry air by moistening the leaves a couple time a day. Quick gentle shot with the hose is all it takes. June 10: she’s growing fast now. Entering the stage of fast vegetative growth where it will be growing by over an inch per day. Fun times. June 12: Sunday Punch EV is really growing fast now. Re-arranged Scrog net and clipped it down to spread it out and provide some stability. Leaves are quite big and catching wind. The eight main colas are ready to be topped tomorrow, and there are another 8 inner growth tips that i can leave and they’ll be big enough to reach for sun like the soon to be 16 main colas…so 16 legit colas and 8 bonus cheaters for a nice and uniform 24 cola plant…sure why not?
Processing
Likes
75
Share
@Dedon
Follow
Hi everyone ! 😀 Everything is ok, no disease, no carrency. but 2 ladies don't want to stretch a lot :/ ( the 2 on the corner, bottom left and Top right ) i don't know why. maybe it's the variety. i have 4 Skunk XL and 2 Critical. Maybe these 2 are the critical ( yes i lost them when i plant the seed 😩 ... ) No more pH fluctuation ( i love that ) EC is around 1.9/2.0 and increase to 2.1/2.2 when they drink a lot so i add water with 1.7 ec to decrease it to 1.9/2.0 again I added 30L of water since i changed the water ( 2 tanks * 20L / i change it the 11/05/18 ) so i'm gonna change the whole solution during the week. See you next week !
Likes
28
Share
Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Have fun with the update. Flowering day 33 since time change to 12/12 h. Hey everyone 😃. Another wonderful week goes by :-). The lady is developing very well. The flowers begin to develop properly and already smell very nice 🙂. The day before yesterday was the last time 1 g of GHSC Powder Feeding per L substrate was added :-). That should last to the end now. Of course, she continues to receive GHSC enhancers 👍 every 14 days. The tent was cleaned every day just like the humidifier was refilled every day. I am very curious how it will develop in the coming week and until then I wish you a lot of fun with the new update. Stay healthy 🙏🏻 and let it grow 🍀🙏🏻 You can buy this Strain at : https://www.royalqueenseeds.de/feminisierte-hanfsamen/115-amnesia-haze.html Type: Amnesia Haze ☝️🏼 Genetics: Original Amnesia Haze 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .
Likes
18
Share
Hey guys sorry about lack of update been real busy, but the grow has finally come to a end and the star of the show was the blue gelato by a clear distance . I will show rest of strains next week keep a eye out. This blue gelato is bursting with blueberry and cake pheno really nice and strong buzz highly recommended and will surely be keeping this girl around for a few more runs
Likes
57
Share
@Kmikaz420
Follow
Alors aujourd'hui je fais du BHO et pour vous remercier de votre fidélité je vais vous montrer ma méthode (que j utilisé dans le passé (j ai depuis acheter du matériel un peut plus professionnel ;) Alors pour tous sa il vous faudra =1..2 seringue de 300ml ou plus dispo sur mamazon = des filtres à café (NON BLANCHIE !!!) =des colier de serrage pour fixer les filtres. = et bien sûr du gaz (butane et en général je prend du gaz filtrer 12x pour éviter les saleté qu il peut y avoir dans certain gaz . =et enfin il vous faudra un bol pour récupérer tous le nectar^^ (J UTILISE DES MOULES A GÂTEAUX EN SILICONE (rien qui accroche) Mais si vous utilisez un extracteur en plastique et ou un moule en silicone il faudra absolument prendre du butane et non pas DME =CAR LE DME ENMENE DES PARTICULES DE SILICONES EY DE PLASTIQUE LORS DU GAZAGE Voilà voilà je vais commencer et prendre des vidéo au fur et à mesure que je vais poster pour vous montrer . Après 1heure de dégazage vous aurez une fine couche ai fond qu il va falloir travailler pour y faire rentrer de l air (ne t inquiète pas j vais poster une vidéo se soir ou tu pourra voir comment faire..) Le crumble est je pense la seul sorte de bho que l on peut faire sans trop d équipement (pour le reste il faudrais evaporatrice rotative ou autre etc ) Avec le crumble c est votre main qui fais le travail = l objectif est que l air touche toute les partie de la patte comme sa le gaz sort et l air oxyde les trichome etc etc
Likes
36
Share
The buds are bulking and a slight defoliation was done to expose the inner buds. The next week will be the last week of Nitrogen and flush will begin soon. Harvest in approx. 3 weeks
Likes
6
Share