😈😈😈

Que pasa familia, vamos actualizar esta 5 semana de floración, y no veáis cómo se está poniendo el asunto, las flores están repletas de resina , en los 2 indoors los 9 ejemplares están floreciendo bastante bien hay 3 con pequeñas carencias que no puedan solucionar buenos abonos. Entre riego y riego suelen pasar 2/3 días hasta que el sustrato está bien seco. La temperatura en estos 2 indoors es estable ni sube de 26 ni baja de 21 así que fetén, la humedad a sido controlada en la sala, antes estaba un poco alta , ahora ya no sobrepasa los 55%. En las fotos podéis aprecias que las flores van engordando y progresando como debe ser. Hasta aquí es todo espero que siga todo como ahora hasta el final, irnos humos 💨💨💨 y feliz año 🎊 .

This was a very fun plant to grow, Don’t know if I’m getting better at growing or these plants are able to deal with my slip ups 😂 they didn’t mind being topped or tied down... Out of 10 plants 9 made it 👌🏻😎 there was 31oz dry bud Id personally smoke.... and 5oz pop corn type bud that was put aside for making butter and other stuff 😏 White widow x big bud dosent lie it gets very white with big buds 👌🏻😊 win win in my eyes

Big dense main colas, orange creamsicle terps, nice yield, covered in resin.

I'm very happy with this grow! I've end up with beautiful plant that i can't wait to try! So far the strain is covering its product description and i would definitely recommend it to everybody!

In the second week the plant has now started to produce its first set of single bladed leafs.

Nov.5 -we placed these girls in a paper towel and paper towel in ziplock Nov.6 - Once girls seeds showed tap root we placed the tap root down into the rockwool Nov.9 - Started DWC, put a small layer of pellets at the bottom then placed in rockwool then covered rockwool with pellets Nov.10 - Took a light away and put it in our small tent, these guys only have the one light now

Buds are not as dense as the first purple punch but the mass is more. Will keep this updated up to drying. Edit #1 June 15 : buds have been washed in baking soda/lime juice warm water (32*C) > rtp water (27*C) > cold water (22*C). Buds then will be hung to dry for 24 hours in AC (45% humid). At day 2 (or in another 24 hours) will move the buds into another room for 24 hours again @65-75% humidity. Day 3 (or in another and probably the last 24 hours of drying) will move back into ac and then a stem test on each branch will be conducted to see if they are dry enough. If they are not dry enough after day 3 (2 days ac @ 45% and 1 day rtp @65-75%) then a 4th day of ac drying will occur and then more branch tests. Upon being sufficiently dry, the final trim of the sugar leaves will occur and then jarring with some Boveda 58%. Thanks for reading, more edits to come. Edit : 18/June/‘21 Seeds looking real nice, I have given some away for people to rest and tell me if I did my procedure correct (feminizing seeds with female pollen due to a female plant being stress). If this procedure is correct I’ll be fertilizing my current grow too. 1) Purple Paralysis (Jellyfish Bud) (F) 2) Monster Mass (F) 3) Lavender (bag seed gender unknown) Edit 2 25th June : buds dried at 36-45% humidity for 4 days before jarring.

The start of the week and the girls recovered well from the topping, now it's just waiting for I have 3 nodes and than it's time for the second topping Day 32 and the girls have get there second topping The end of the week and the girls are recovering well from the second topping, I think with 2/3 days they get the 3th and last topping of the mainline

just about finished up this week. Choc mint 1 is about ready for chop. Chopped couple of main colas as i seen couple of signs of budrot. Dropped lights down to 400w each as temps are starting to rise above 30c. Choc mint 2 is looking unreal. Heaps of huge colas,think i will pull the most of this one. Will probably give till day 65.

Very easy grow and strong disease resistant. Recommended for anybody looking for that easy grow with a large canopy 🌳💣

So far so good, light has been adjusted to 16 DLI, other than that not much happened. This week I will start applying LST on her.

Week 8 of flower is in the books and this show is quickly coming to an end. I said last week we had about 7-10 days and I was spot on at the 10 day mark. I was only wrong about the order. The cheese is ready to chop before the rest and the gorilla cookies, cherry Bomb and lemon haze will follow in due course. The cheese is a beast and it’ll take a little time to get it all run through the bowl trimmer. At least the big one goes first. Her tallest colas have foxtailed like mar, despite the late supercrop. You can tell where the sweet spot for the light is at about 10” distance from the canopy. Any closer than that and the tails begin to show prominently. It’s a good example of just how close you can get to these fixtures with a little bit of prior experience. It’s been noted for the next run😎👍😎. The res. is on an h2o2 only flush for the remainder until the rest are ready to come down. Not a moment too soon either - the pollen chucking project has stalled out waiting for these girls to finish and now that we’ll have a little extra room, we can start running our cuts in the aerocloner🤟. Not long at all now folks. Thanks for tagging along through all this. Learned a bunch about this system and we’re back to hardware mode to make some serious improvements for the next run🤙😎. I love hardware mode😉. Background/Repetitive Nonsense The strain line up on this grow is look’n quite saucy 😈. We’ve got 2 FB strains this time around - Gorilla Cookies (seems we always have some GSC cross in the works). Mainly because the colours look stellar and remind me of a sugar breathe we did last year that was 🔥. The other FB is their original Cheese strain... because we already smoked all our cheese... and we really like our cheese...😉. Emerald triangle was kind enough to include a freebie of Lemon Haze. Wasn’t really big on the list but we haven’t done a haze strain to write home about yet so worth a go👍. The last is a Cherry auto from Bomb seeds that we’ve been trying to get to for months. Let’s just hope that she’s not a dud like the last bean. The new digs for this run are courtesy MarsHydro👊. Their 2x4 single grow tent, paired with a shiny new 240w QB courtesy ViparSpectra. These folks were kind enough to discuss a collaboration and as a result, here we are to test out the gear with an inaugural run of autos. Each week, we’ll try to expand on some of the benefits of each, as well as any limiting factors or considerations that need attention when pondering purchase. Already I can say that both are high quality products in terms of overall craftsmanship. MarsHydro 2x4 Grow Tent: Excellent construction in terms of durability. Reinforced stitching on the zippers and corners ensures zero tearing. Conveniently placed screen vents and intake/exhaust ports. The ceiling exhaust port only exists on the right side. Perfect for me but not great if you’re running exhaust from the top on the left side (left side wall port makes up for this however). The aluminum frame is rigid enough to support the weight of the lights and accessories. Once you have some weight in the tent, she’s go’n nowhere and you can assemble and break it down in record time if moving or stashing the grow op. Only limiting factors I’ve noticed is that temp. Control will be an issue for a tent. It just doesn’t have the same insulating ability as a wood cabinet or other permanent enclosed space. No worries, this is offset by a small desktop heater and keeps the environment exactly where desired. The other issue was a production problem - the ceiling vent was accidentally stitched into the corner seams on the assembly line. Again, no real issue - just pulled it out with no damage or fraying to the tent or port👍. Website link here: https://www.mars-hydro.com/grow-tent/buy-mars-hydro-grow-tent-24x48x70-2-x-4-cabinet-closet-grow-box-upgraded-diamond-1680d-mylar-for-sale ViparSpectra 240w Quantum Board: This thing is sleek and slick in terms of design. Closest comparable to it that I’ve seen would be spiderfarmers line of qbs. They feature the same top-o-the-line components and roughly similar spectrums. Where VS takes the advantage is in the convenience of the dimmer nob which is easily accessible and works great at 50% with no strobing👍. The heat sink is also larger which contributes to lower temps. That’s not a good thing in my case but beneficial for most folks. I can already say that this will be a great fixture through all stages of growth. Where I know this light will excel will be in the veg. Stage for sure. Dimming function gives seedlings a much better chance of success with the ability to use lower lighting levels early on and the coverage area on a 240w is great. The average grower will find this panel suitable and fitting to their needs in a 2x4 grow space although I’d suggest 2 units if going any larger than that. The total output in this space equates to about 30w/sq.ft. Which is a decent amount of coverage based on power vs. Growprint. Ideal for veg. Certainly but, in flower - I tend to run closer to 50-60w/sq.ft to achieve higher yields. Again, similar fixtures have performed admirably in the past and while this wouldn’t be considered an “entry-level” fixture, I’d recommend that any grower new to the game not skimp on lighting and start with one of these. The price points are a great value for quality LED tech. These days, so there’s little reason to even consider a lesser fixture👍. I have no detail on limiting factors for this light as yet but have heard that stock branded fixtures don’t necessarily incorporate enough red diodes. I’ve seen no issue myself but confess - I’m no lighting guru. Website link: https://www.viparspectra.com/collections/xs-series/products/xs-series-xs2000 ***8% discount when using code: “ItBudWhisper”*** Happy to have you along for the ride if you made it this far through my opening rant!!😎🤟😎🤟😎

We started the week by transplanting the Orange Groovy F1 into the 3.6L pots filled with our SWA super-soil: we waited a bit more compared to the first 8 transplants just to make sure the roots were strong enough. At the same time we realized that the Orange Groovy F2 was the first plant ready for topping. This week we continued using our Lumatek dimming it at 60%. We are watering them with 1L divided by all 9 of them of osmosis water. On days 16 and 17 we topped every plant (except for Golden Pussies which still need a couple days and the Orange groovy F1 which we will not top because of her smaller size). We noticed that most of our plants presented lightly yellowed tips. We think that this is due to the deficiency of some immobile elements such as Ca, Fe, S. To solve this problem, we will put some decanted water (because it doesn't contain Chlorine which kills our bacterial substrate life) to give them the correct nutrients. We failed topping Orange Groovy F2 because the central apical started to grow even after cutting it but we kept it just to see what is going to happen. Golden Pussy F2 has been topped too and it went perfectly as you can see in the pictures. The plants continue to grow out of all proportion!

From the looks of my top of the coco it seems like I was over watering. I seem a bit of algae growth, my coco stay moist for 4-5 days it seem like. So should my nute feeding be huge or give them small daily feeding in between the large watering?

I’ve lost two of the four arms I was trying to save 😢 one snapped clean and the other is standing dead. No worries cause there is plenty left to take care of! I’ve built a 4.8m x 4.8m x 3.0m enclosure and now that I’ve splayed everything out there’s barely any room to move again haha absolutely loving it 🌴 I’ve stripped a good 1.5m of bottom plant material clean of side branches and foliage partially for energy distribution and airflow but also partially to bring the obvious foliage above the neighbouring properties tree line now if anyone peeks over they should see a bunch of sticks instead of a forest of sticky :p They are definitely in flower I think I’m at the end of pre-flower stretch. They’ve reached the top of the enclosure so I’ve pulled most of the tall arms over and I think they’ve stopped reaching meaning the next few weeks should produce some fun material to post up Thanks everyone for following along

28.07.25 the remaining Auto Amnesia is getting bigger buds by the week and dropping fan leaves. Happy growing!

Flower smell like lemon a bite and sweet