Likes
Comments
Share
@Kaia108
Follow
You can see the nute burn here from the first and only feeding earlier in the grow. Just a tad too much fertilizer.
Likes
21
Share
@PeterSage
Follow
in the last pic i show what to me is a deficiency of potassium in the early stage. To repair this issue I'm gonna take something like big bud from advanced nutrients, what do you guys think? Apart from that I think everything is ok, the overall health is good, the leaves have a nice green, no excessive sign of pests... let's hope that doesn't change same diet as the previous weeks, I'm gonna make an update next week
Likes
1
Share
@SGCFarms
Follow
She’s not even close to being done and she’s looking so incredible. The smell gets intense the second you touch her. Nice and thick stems with a close bud structure. She’s drinking about 2-3 gallons per day at this point. Not showing any signs of slowing down, but the buds are super dense to the touch.
Likes
13
Share
@russrahl
Follow
1 month in now and all is still good. She finished stretching and I got the second net on now about a foot above the first screen. I tucked her a bit to level her off with the other 3 Obi-wan kush around her, shes still up a bit higher on the sides but I let those go cause there on the sides...lol still feeding nutrients on the lower side, just shy of half strength. Buds are developing good, not as big as the Obi-wan but that was to be expected. Cheers 💨
Likes
9
Share
The whole neighbourhood is trying to figure out where the skunk family is!!! Plants never stopped flowering yet but have slowed considerably. We had 5 major frosts and 2 snow events during this grow and all plants stood the test. One night was -4C. This is all coming down in two days where it is scheduled to be a +22C day.
Likes
8
Share
She responded well to her first feeding. Only one feeding with grow big, has been swapped for tiger bloom. Slowly lollipopping and removing future larf nugs. Video/photos taken 42 days after breaking soil.
Likes
16
Share
Creo que el filtro esta roto o dañado ya que el extractor larga todo hacia afuera todo el olor de la tienda
Likes
9
Share
@Rizik86
Follow
Day 29 - Checked PPM 720. Water always seems to be low from here on. The plant uses so much daily. Late night PPM check 450. Day 30 - Checked PPM 420. ***WHITE HAIRS ARE SHOWING*** Added 10 mL of CalMag Micro Grow and Bloom. Added 5 mL of each additive plus BIG BUD AND NIRVANA. I dont have bud ignitor and bud factor x or i would have added them as well. PPM is 1,600. Plant is 17 inches tall. Light is 12 inches away from top of plant. PAR/PPFD is around 600 at the tops of the plant. DLI is around 30. Day 31 - Checked PPM 1,080. Plant is 18 inches tall and 24 inches wide. I had to expand the grow area to accommodate the plant. Day 32 - Checked PPM 895. Water is low. Raised the light as some of the leaves was taco shaped. Light is now 18 inches above the plant. Plant is 19 inches tall. Day 33 - Checked PPM 570. Water is low. Added 5 mL of CalMag Micro Grow and Bloom. PPM is 720. Plant is 22 inches tall. Day 34 - Checked PPM 620. Plant is 23 inches tall. Added 5 mL of CalMag Micro Grow and Bloom. Added 2 mL of each additive. PPM is 1,020. Day 35 - Checked PPM 700. Plant is 25 inches tall. Roots are as thick as a pencil. The rootball is massive!.
Likes
21
Share
@NSABND
Follow
Natural grow with all the cloudy,rain und Sun hours
Likes
8
Share
Today, I spent some time tying down branches under the net again. It’s still a tricky task as the branches are quite brittle and break easily. Fortunately, the plants recover quickly, and so far, I’ve mainly noticed new growth sprouting from where the branches broke. Watering Experiment: Too Much or Just Right? Two days ago, I decided to give each plant an additional 2 liters of water to test the effects of what felt like overwatering. The results were interesting: High Humidity: The relative humidity spiked to 74%, which I consider a minor downside. Lower Temperature: Dropped to 29°C. Explosive Growth: The plants responded with vigorous growth! Given the humidity increase, I’ve decided to water the plants heavily only once a week. This approach should give them time to rest and prevent the growth of more mushrooms in the soil—yes, I’ve spotted a few popping up from the pot’s surface. Monitoring pH and Nutrient Reservoir I’ve also noticed that the pH has crept up to 6.2, indicating that the nutrient water hardness is decreasing. This suggests it might be time for a full reservoir refresh. Tonight, I plan to inspect the reservoir and clean it out. Thankfully, my hydro pump makes draining it a quick and easy process. Observations & Next Steps Continue training and monitoring branch recovery. Stick to the adjusted watering schedule. Refresh the nutrient reservoir and recalibrate the pH if needed. The grow is progressing nicely, and the plants seem happy despite some of the challenges. Let’s keep it going! 🌱 Cheers 30/11: Added some pictures, not to much to say because I didn't look at them the last 2 days and they just went crazy.. 01/01/25: Happy New year!! Leaving them alone is not an option... If they keep growing like this, I'll take it! This weekend, I'll do some heavy pruning. For now, I’ve snapped a few stems and tied some others to see which method gives better results. I’ve done about half so far, but I need to head to bed because of work. Tomorrow evening, I’ll tackle the other half. Also, I’ll look for some more subtle zip ties.
Likes
8
Share
These two did great even through a lil stress they still came out on top. I almost want to run it back but I think it's time for something fruity maybe, maybe having a terpene profile that helps initiate a more stone heavy affect and be indica heavy.
Likes
20
Share
@Chubbs
Follow
420 Fastbuds FBT2305 Week 4 Weekly update for these two beauties. From sprout to this point they've grown like Champs. A little calmag issues a few weeks back but over all nothing major. Still spraying PureCrop every Monday as preventive maintenance for pest,mold, or any other topical problems. I upped to feeding to 2000ml everyother day and alternating from nutes to just Ph'd water. Until next week's update grow fam Happy Growing my fellow growers.
Likes
19
Share
Bonjour à tous les padawans et maîtres jedis Tout d'abord merci à James de Royal queen seeds de me permettre de faire cette culture Je rappelle je n'utilise que le strict minimum du matériel nécessaire à une culture correcte au prix le plus bas possible MATÉRIEL CONFIGURATION Box 80×80×160 Lampe led greenception GC4 250WATTS Ventilateur à pince 15 watts Xiaomi Deerma humidificateurs 5L Hygrometre thermomètre Extracteur PROFAN 107 m3/h - 100 Prise programmable électronique ×2 1 pot geotextile noir 10 litres (RQS) RQS feeding easy boost organic RQS easy combo tablets Substrat cellmax bio ligthmix Fil de fer et pince coupante Microscope Petite balance de précision CULTURE ÉTAPE PAR ÉTAPE J'ai tout dabord fais germé ma graine avec le easy start de Royal queen seed et je suis agréablement surpris car franchement le taux de réussite est très élevé (9 graines sur 10) simple d'utilisation et très efficace. Une fois la plantule sortie et d'une hauteur de 2 ou 3 centimètres je la prend délicatement et la place directement dans son pot définitif. Je préconise des pots allant entre 10 litres et 15 litres pour des autofloraisons cultivées en intérieur. Le pot aura été préalablement préparé (video dans diarie) avec 50 grammes d'engrais RQS easy boost organic, soit l'équivalent de à peu près 5 grammes par litre de substrat. Je dépose donc la plantule dans son pot définitif je recouvre un peu de avec de terre je tasse légèrement et j'arrose pour garder le substrat humide pas plus Je place ma lampe led 300watts à environ 90 centimètres de la plantule avec un cycle de lumière de 24/24 pendant une semaine. Au début de la semaine 2 le cycle de lumière passera en 20/4 grace a un programmateur car c'est pour moi le cycle de lumière qui offre le meilleur rendement pour une autofloraison. Jour1: léger arrosage Jour2: léger arrosage Jour5: préparation de 3 litres d'eau ph6.3 à laquelle j'ajoute une tablette grow easy combo RQS ensuite arrosage avec 1,5 litre d'eau ph6.3
Likes
2
Share
I did not top this girl, yet. Her top lowers started catching up to the top so I didn’t want to stop her yet lol. But all in all she’s looking healthy.
Likes
17
Share
Meine Woche ist an sich gut verlaufen, wie man auf den Bildern sehen kann habe ich sie nun oben heruntergebogen sowie auch an den Seiten Arm da sie sonst zu nah an die Lampe wächst. Ich habe auch eine neue Lampe und zwar von Mars Hydro die T600 Ich denke sie müssen sich erst ein wenig an die neue Lampe gewöhnen denn die hat um einiges mehr power als die letzte die ich selber gebaut habe ich glaube deswegen hängen die Blätter ein wenig. Ich habe zwei Blätter da ist eine komische Farbe drauf die man auf den Bildern ersehen kann einmal ein wenig bräunlich und einmal ein wenig braun hat jemand eine Idee was das sein kann. Nächste Woche werde ich die Uhr umstellen und sie in die Blüte schicken.
Likes
27
Share
@Endriu
Follow
Here we are again Bros&Sis! During my first indoor grow with Bubblegum XL I've had took some cuts to keep them alive and have some good plants to play with and exploring a little more the vaste world of growing cannabis... Long story short, 5 of them has radicated (some with plain water technique, some in rockwool cube) and then I started to play with them and tested my chinese Meizhi R300W LED panel (real wattage is 136w) it was full of dust, so why not? 😎 Now, the plants. They are in good conditions, some are in the same pot by weeks now (soil and coco), and try to keep them alive, so maybe they shows sign of suffering. Except for the One: In the video you will see my REALLY HIGH SCIENTIFIC METHOD (😂) wich I use to choose the best clones that will goes directly under a Scrog net (i am a DIYer) to fill the entire area lighten by the panel, it's a bit ambitious, but it will be fun for sure! I choose that one because she is the only one that gives me really good vibes and shows me she is strong enough to pass through hst, crop, supercrop and so and so... even if my original intentions was to keep them as a bonsai mothers, I've decided that this project have priority! 10weeks old Bubblegum XL clone Pot 11lt NetPot Coco brick with mycos Canna Coco A+B Liquid silicon from Growth Technology- guys, this thing is magical, besides the great effects on the plants' roots and system, after a couple of apply the plants were much more flexible and resistant to mites (yes, they are still there, fu**inmotherfu**ers, but this time they will die. forever gone, bye!)- I will never stop to thank @Mr_Di for his precious tips😘Higly basic product, it will raise your solution's PH, so watch out! Let me know what you think about, mates! CIAO! 😀
Likes
35
Share
@Belverde
Follow
Welcome growers We are at the end of week n°2 in bloom with the CREAM CARAMEL 🍬🍭🍫 The flowers are completely appears 🌻 She's definetly the most fastness in the garden and promise well 🔥 Anyway.. About nutrients 👇 I still giving their always organic/veganic nutrients.. A little bit of silicium (Bionova) / Activator (Biomagno) / Crescita (Biomagno) / Activera (Biobizz) / Grow vegan (Bionova) / The Missing Link (Bionova) / X-Cell (Bionova) / Bioheaven (Biobizz) , a little bit of P-K 3-5 (Bionova) {in spray solution } , Fioritura (Biomagno) and Bloom vegan (Bionova) Like i usually do, a little bit of everything at any watering 💧 And that's all.. Very easy week See you next 📆 Thanks for watching 😎👍👍 FC ✌️ 🇮🇹