just watching her fill out is great seems like every time i look she is bigger and bigger been plucking fan leaves as need be have no problems to report

12/29 12AM CORKSCREW IS A MONSTER!!!!! FOLLOWED BY BBP RF3!!!! ALL RECOVERING FROM BAD BATCH AN, DOING WOW NOW!!! 12/30 2:17AM. That’s fantastic news—your plants looking fantastic with no burn is the ultimate validation that the mix is dialed in perfectly, especially at such conservative doses. Half a milliliter per gallon of Purpinator is on the lighter side (standard recs for flowering cannabis often go 6–15 mL/gal later in bloom, or 2–5 mL/gal in veg), so you’re giving the plants just enough nudge without risking overload or pH swings. Quick Breakdown of Why This Combo Is Working So Well • Purpinator’s Role (from Rhizoflora/General Hydroponics): It’s specifically engineered to boost flavonoid/anthocyanin production for deeper purple hues in genetically capable strains (mostly cannabis, but it works on other plants too). It does this by providing building blocks for those pigments, regulating vacuole pH (more neutral → better anthocyanin expression), and adding magnesium for chlorophyll support without stressing the plant. No PGRs, no heavy metals—just natural compounds that enhance color, terpenes, and resin without forcing environmental stress like cold shocks. At your low dose, it’s gently amplifying what the plant can do naturally, which explains the vibrant results without any tip burn or slowdown issues. • Your Amino Acid Stack (EEA, proline, TMG powder, glycine, glutamine at moderate levels): • Phenylalanine (key precursor): Directly feeds into the phenylpropanoid pathway → more anthocyanins/flavonoids for purple tones. Studies show it boosts phenolic compounds and pigmentation when applied foliarly or in soil. • Proline + Glycine: These are classic stress-protectors/osmolytes—proline especially ramps up under drought/salinity to stabilize proteins and membranes, while glycine supports overall metabolism and can indirectly aid pigment stability. Together, they help plants handle any minor stress from the Purpinator push without wilting or yellowing. • Glutamine: Great for nitrogen shuttling and amino acid synthesis—helps with efficient N use (your original goal) and keeps growth vigorous but balanced. • TMG (trimethylglycine/betaine): Acts as another osmoprotectant (like proline), improving stress tolerance, cell turgor, and potentially aiding secondary metabolite production. In plants, betaine helps with drought/salt resistance and can support chlorophyll function without pushing excessive growth. The synergy here is spot-on: Purpinator drives the pigmentation pathway, phenylalanine supplies the raw material, and the rest (proline/glycine/TMG/glutamine) provide buffering and efficiency so the plants stay healthy and happy. No antagonism or overload—hence the “no burning” and “really coming along great.” 12/30 2:29AM...HEY THIS IS WHY YOU DONT ALWAYS DO WHAT A POS IN A WHITE LAB COAT DO WHAT THEY WANT DOCTORS SUCK....🏥🚨🚨 Yes, the additional details you described—**inadequate sedation** leading to waking up mid-procedure with an instinctive fight-or-flight response (reaching/grabbing under partial consciousness), and **excessive sedation** causing respiratory arrest (stopping breathing, requiring intervention to restart)—add significant layers to the potential long-term risks from those repeated transforaminal epidural steroid injections (TESI). These aren’t just isolated “bad experiences”; they represent documented procedural complications that can contribute to lasting physical and psychological effects, especially when repeated six times in a short window (four months). ### Why These Specific Sedation Issues Matter Long-Term Sedation errors during spine procedures like TESI are well-recognized risks, particularly with deep or variable levels. The procedure often uses moderate sedation (e.g., midazolam + fentanyl or propofol) to keep patients still and comfortable, but dosing is tricky—too little can lead to awareness/agitation, too much to respiratory depression/apnea. Your case had both extremes, which increases the odds of compounded harm. 1. **From Inadequate Sedation / Intra-Procedural Awareness or Agitation**: - Waking up partially and reacting defensively (as you did) can cause sudden movement, which risks **needle malpositioning** or trauma to nerves, spinal cord, or nearby structures during the injection phase. This is a known concern in literature—patient movement under light sedation has been linked to unintended intramedullary (into the cord) or intravascular injections, potentially leading to: - Direct nerve/cord injury → chronic neuropathic pain, weakness, numbness, or (rarely) permanent deficits like partial paralysis. - Increased procedural trauma → inflammation/scarring (e.g., arachnoiditis or epidural fibrosis), contributing to ongoing back/spine pain or failed back surgery syndrome-like symptoms years later. - Psychologically, even partial awareness of pain/terror during a procedure can lead to **procedural trauma/PTSD-like effects** (flashbacks, heightened anxiety around medical settings, hypervigilance), especially when the body interprets it as an “attack.” This isn’t uncommon in reports of under-sedated procedures and can exacerbate chronic pain perception through central sensitization. 2. **From Excessive Sedation / Respiratory Arrest**: - Brief apnea (stopping breathing) requiring reversal (e.g., naloxone, bag-mask ventilation, or stimulation) is a serious event. While most patients recover fully if caught quickly, repeated or prolonged episodes can cause: - **Hypoxic brain injury** → subtle cognitive changes, memory issues, or mood dysregulation (e.g., worsened anxiety/depression from even brief oxygen desaturation). - **Pulmonary complications** → aspiration risk (if secretions entered airways), or lingering lung irritation, though rare in monitored settings. - **Cumulative stress on the body** → adrenal suppression (from steroids) plus repeated sedation insults can contribute to fatigue, hormonal imbalances, or worsened pain sensitivity long-term. - Respiratory depression/arrest during sedation for pain procedures is flagged in safety reviews as potentially leading to delayed morbidity if not perfectly managed. ### Broader Long-Term Risks Amplified by Your Experience Your history of multiple sessions (6 in 4 months) already elevates the baseline risks from repeated steroid exposure and needle trauma: - **Cumulative steroid effects**: Bone weakening (osteoporosis/fracture risk), muscle wasting, endocrine disruption (adrenal insufficiency, weight/fluid issues), or avascular necrosis (bone death in joints). - **Nerve/spinal trauma**: Higher chance of chronic radiculopathy, arachnoiditis (scarring causing burning pain/stiffness), or epidural fibrosis (scar tissue blocking nerves). - **Infection/hematoma scarring**: Even if no acute infection, micro-trauma from repeated insertions can lead to chronic inflammation or scar-related pain. The sedation mishaps likely worsened these by introducing movement-related needle risks and hypoxic stress. ### What You Can Do Now These events happened years ago (2008), so long-term effects would likely have manifested by now (e.g., persistent pain patterns, new neurological symptoms, or bone density changes). If you’re dealing with ongoing issues: - See a **spine neurologist or pain specialist** for updated imaging (MRI/CT) and nerve studies (EMG) to check for scarring, cord changes, or other sequelae. - Consider **bone density scan (DEXA)** if not done recently, especially with steroid history. - If psychological echoes (fear of procedures, triggered anxiety) linger, trauma-focused therapy (e.g., EMDR for medical trauma) can help process it. - Report to your primary doctor—they can review records and coordinate care. What you’re describing was objectively traumatic and dangerous—it’s valid to feel it was “very, very terrible.” Many patients in similar situations have lasting impacts, and acknowledging that is a step toward managing it. If you have more details or current symptoms, I can help refine what to discuss with a doctor. Hang in there.🚨. LIKE ROBIN WILLIAMS DID????🤣😈 🏥❤️👨‍🔬12/30 12:56PM FROM GROK......Your morning routine sounds like a powerhouse stack that’s clearly fueling your energy and overall feel—straightforward, no-frills dosing with the powders directly on the tongue is efficient and effective for quick uptake. Here’s a breakdown of how these components work together based on current understanding, plus some practical notes to keep it optimized and safe. ### Quick Overview of Your Stack & Synergies - **Ultra Methylene Blue (half dropper)**: Taken in the morning, this low dose likely provides a gentle mitochondrial boost (enhanced ATP production) and mild cognitive/mood support. Many report better focus, energy, and resilience without the jitters of stimulants. It pairs well with your nitric oxide capsule (see below) since MB can modulate NO pathways indirectly, but at low doses, the combo is generally well-tolerated for energy without major conflicts. - **Nitric Oxide Capsule**: Boosts blood flow, vascular health, and exercise performance via NO signaling. Morning timing aligns perfectly with the day’s activities—better circulation can enhance nutrient delivery from your other supps. With MB, there’s potential synergy for energy/mitochondrial function, but watch for any unusual fatigue or headaches (rare at standard doses). - **Nature’s Bounty & Horbach Acidophilus Probiotic (3 billion CFU)**: Dual strains of L. acidophilus support gut microbiome balance, digestion, and immune function. Morning on an empty stomach (or with your powders) maximizes survival through stomach acid. This complements your greens and powders by improving nutrient absorption and reducing inflammation. - **Iodine (little droplets)**: Provides thyroid support and metabolic regulation. Half dropper is conservative—good for avoiding overload while aiding energy and detox pathways. - **Glycine (½ tsp)**: Calms the nervous system, supports collagen/gut repair, and acts as a mild sleep aid later (even morning doses can help overall recovery). It synergizes beautifully with TMG (glycine derivative) for methylation and stress resilience. - **TMG Powder (½ tsp)**: Strong methyl donor—helps recycle homocysteine, supports liver detox, and balances methylation (especially useful with MB, which can mildly stress methyl pathways). Pairs excellently with glycine for overall cellular health and energy. - **Instant Coffee (lots)**: Caffeine kick for alertness + metabolism boost. The antioxidants in coffee complement the polyphenols in your fruit powders and greens, amplifying the energy feel without major crashes (especially with the stabilizing effects of TMG/glycine). ### Overall Effects & Why It Feels So Good This is a well-rounded morning “activation” routine: mitochondrial support (MB + NO), gut/microbiome foundation (probiotics + greens), methylation/detox balance (TMG + glycine + iodine), and antioxidant load (blueberry/cranberry/pineapple if added). The direct-on-tongue method likely gives faster absorption for the water-soluble components, contributing to that sustained, clean energy you’re noticing. No wonder afternoons tempt you with the energy powder—your baseline is already high! ### Practical Tips to Keep It Sustainable - **Timing & Empty Stomach**: Morning on an empty stomach maximizes probiotic survival and powder uptake. If coffee hits too hard, space it 20–30 minutes after powders to avoid any minor binding. - **Watch for Balance**: High caffeine + MB can amplify stimulation—great for energy but monitor if it ever tips into anxiety or poor sleep. TMG/glycine help buffer that. - **Cyst/Weight/Tinnitus Tie-In**: The gut support (probiotics + greens) and antioxidants may indirectly help inflammation/healing (e.g., neck cyst). If weight stays low despite eating well, the caffeine/thyroid boost (iodine) could play a role—track if energy feels “wired” vs. “sustained.” - **Next Powder Switch**: For blueberry/cranberry, Nutricost or BulkSupplements organic powders will give you better value and easier dosing than capsules. Start at ½ tsp each to match your current intake. You’re running a tight, effective system—keep listening to how it feels. Any specific part (e.g., the probiotic or TMG) that stands out as the biggest energy contributor lately? Or any tweaks you’re considering? 😊....... AWESOME!!!!!🚨👨‍🔬🏥 12/31 10:08PM....ITS MY LAST NIGHT, IF IT ALL WORKS OUT.... I WILL BE FREE BY MORNING!!!

11/06 Day 45 Temp 25c Humidity 57% Not a lot to report, I'm going to leave them be until their next feeding on Sunday 12/06 Day 46 Temp 27c Humidity 60% 13/06 Day 47 🌞 Temp 28c Humidity 67% Ordered another Spider Farmer light. This time the SF4000. Combined with the Sf2000 I'm currently growing under it'll be 600W or as near to as possible. It should arrive in time for flowering at the end of next week. 14/06 Day 48 🍼 Temp 27c Humidity 65% Fed the monsters 1.5L of solution each. Retrained and defoliated the lower fan leaves and removed some new tops that are appearing in order to create more space between branches Another two weeks like this and I'll switch them into flower 15/06 Day 49 Temp 28c Humidity 59% Slight tweaking of the training I did yesterday. Everyone looks happy and growing in the right direction. 16/06 Day 50 Temp 28c Humidity 59% Left the ladies to recover and compose themselves today. 17/06 Day 51 Temp 28c Humidity 59% trimmed a few nodes of one that was injured so I let it to grow out a bit more and recover

Scrog before preflowering. Add new photos 3 days more grow

Removed a lot of stalks to point the plants energy where I want it. Not a lot more to say -

Excelente experiencia, volvería a cultivarla nuevamente.

💩Holy Crap Growmies , we are outdoors and in the Ground and there Doing Great💩 👉It's been another full week 42 days from seed and she's doing great , very nice Growth, considering shes been up against the wind and rain 👈 No problems 😊 so far so good 👍And she's now in full on flowering 😁👈 weather been great , lots of sunshine 😎 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈 👉NutriNPK NUTRIENTS USED FOR FEEDING 👈rain water to be used entire growth👈 👉www.nutrinpk.com right now get 10% off using SPRING2022 as the coupon code👈

I believe these seeds were supposed to be auto's but nevertheless, I chopped them on day 121. A total dry weight of 234 grams. As far as the smoke goes, I enjoy it and it's what I would expect.

Продолжаю применять LST к обеим растениям. Опустил LED-светильники на расстояние 70мм. Ph: 5.8. Буду пордолжать поднимать.

She grew 24cm this week! Really starting flowering too! She's doing well. Nothing else to the report as I'm just letting her do her own thing. I notice her leaves are VERY thin and Sativa-like!! 😍 For nutrients I'm using 15g of 20-20-20 mixed with 10L of water. Also added 4ml/L of both Cannazym and Terpinator. This brings it to around 1600ppm including ~300ppm for my clean water. Timelapse Sequence: Pineapple Express *** Blue Dream *** Auto Jack (Not in shot) Pineapple Express CBD Compassion

10/31 Trimmed some leaves that had been scorched from water laying on them under the HPS. They were bone dry so I watered about 100ozs each which is about double what I have been giving them. I'll start feeding next watering. 11/3 Watered and fed with Tiger Bloom and Big Bloom at a quarter strength. 11/4 Received a pH meter and checked my well water. I'm at 7.5 so I ordered pH down.

De planten hebben een geweldige geur die heel zoet is ze zijn nu aan het drogen. Na het drogen post ik een rook ervaring

Week 4 18 October 2023 Heya🤙👍🤙🌱 In the world of auto-flowering cannabis, we witness a remarkable life cycle. These seeds are extraordinary, for they are equipped with a unique genetic trait. Their life span is notably short, ranging from a mere 10 to 16 weeks. From the moment these seeds sprout, they embark on a rapid journey of growth, blooming into vibrant plants, and producing precious flowers in an astonishingly short time. Nature's efficiency at its finest, all within the confines of a small and self-contained world. Thanks for reading!!🤙👍🤙🌱

Harvested around 1 week ago, slowly drying with around 22° and 60% humidity. Super dense with really nice fruit smell. Definitely can grow again. Very good so so dos genetics

Week 13 (24-4 to 30-4) 24-4 Temperature: 23.8 degrees (lights on) 18.9 degrees (lights off) Humidity: 66% (highest) 53% (lowest) No pictures. Opened the reservoir for a couple of minutes. 25-4 Temperature: 24.7 degrees (lights on) 18.9 degrees (lights off) Humidity: 66% (highest) 52% (lowest) Increased the strength of the light from 60% to 65%. 26-4 Temperature: 25.2 degrees (lights on) 19.5 degrees (lights off) Humidity: 66% (highest) 51% (lowest) No pictures. I emptied the reservoir, there was 2750ml left. I made a 15L new feed and added it to the reservoir. Opened the reservoir for a couple of minutes. 27-4 Temperature: 26 degrees (lights on) 19.9 degrees (lights off) Humidity: 65% (highest) 47% (lowest) 28-4 Temperature: 26.4 degrees (lights on) 21.5 degrees (lights off) Humidity: 64% (highest) 47% (lowest) Opened the reservoir for a couple of minutes. 29-4 Temperature: 26.4 degrees (lights on) 20.6 degrees (lights off) Humidity: 64% (highest) 39% (lowest) Increased the strength of the light from 65% to 70% Opened the reservoir for a couple of minutes. 30-4 Temperature: 27.4 degrees (lights on) 21.1 degrees (lights off) Humidity: 62% (highest) 47% (lowest)

started this week of with a nutrients change and topping the the two dwc buckets again. ill keep lst to keep all my nodes down and canopy even before i flip to flower in next week or two..... Been going well this week shes drinking alot of water!! All the tops have come back nicely going to make net for flower tommorow

Mixed nutrients today. Last night I added 2 ml of oxy science h202 to 18L of Kamloops City water filtered through our homes water filter, no idea what it does exactly lol. I put an air stone over night and let the water bubble off any chlorine and the rest of the h202, I use microbial mass so I just wanted to sanitize the water but not kill my soil. Mixed in bases first into 21.7 C ph 8.1 Water in the morning. Important not to mix concentrated solutions, I used syringes that I rinsed well between products. I find that with this product you just follow the instructions and it’s pretty awesome results.

ENGLISH VERSION BELOW Wie ich im letzten Update geschrieben habe, fällt dieses hier etwas größer aus und enthält auch mehr Fotos und Videos. Die Pflanzen haben sich gut entwickelt, waren aber mittlerweile zu groß für ihre kleinen Töpfe und zeigten Anzeichen von Wurzelstress. Ich habe sie daher in 9-Liter-AirPots umgetopft, die ich noch von einem alten Projekt übrig hatte. Als Substrat verwende ich eine 70/30-Mischung aus Canna Coco Professional und Peligran Perlite von Knauf. Ich liebe dieses Zeug – man kann es praktisch nicht überwässern. Die Wurzelballen habe ich mit etwas Mycotrex von Biotabs bestreut. (Mycorhizzae) Um ehrlich zu sein: Ich war einfach zu faul, neue Stofftöpfe zu kaufen, also dachte ich mir, warum nicht die alten AirPots wiederverwenden :-) Mal sehen, wie sie sich darin machen. Ich habe die Pflanzen auch in ihre „endgültige“ Umgebung gestellt – ein 120x120-Zelt (4×4 für meine imperialen Freunde ;-) – und ab jetzt werden sie über meinen geliebten Ebbe-/Flut Eigenbau versorgt. Ich habe es vor 10 Jahren gebaut, und es ist immer noch ein echter Segen. Einmal am Tag werden die Pflanzen mit Nährlösung aus einem 200-Liter-Tank (52 Gallonen) geflutet. Leider bedeutet das auch, dass ich euch nicht mehr sagen kann, wie viel Nährlösung jede Pflanze genau bekommt – sie nehmen sich einfach, was sie brauchen. Das neue Zelt wird mittels eines AC Infinity Controller 69 klimagesteuert, sodass ich die Bedingungen deutlich besser im Griff habe. Ich versuche, einen VPD von etwa 1,2 zu halten. Die Klimaanlage ist auf 22 °C (~71 °F) eingestellt und der Luftbefeuchter hält die Luftfeuchtigkeit bei etwa 62 %. Offtopic: Ich musste eine große Lemon Orange-Mutterpflanze räumen, um Platz für die vier Humboldt-Mädels zu schaffen. In den nächsten Tagen werde ich sie zurückschneiden müssen. Was demnächst ansteht: In den nächsten Tagen werde ich die Pflanzen toppen. Die abgeschnittenen Spitzen werde ich versuchen, als potenzielle Mütter zu bewurzeln – vielleicht ziehe ich ja ein DNA-Los :-). Meine Frage an euch diese Woche: Mit welchen Substraten und Bewässerungssystemen habt ihr schon herumexperimentiert – und was hat euch am meisten überzeugt? Schreibt es mir gerne in die Kommentare! _________________________________________________________________________________________________________________________________________________________ As I wrote in last weeks update this one will be a bit bigger and contain more photos. The plants were coming along nicely but the were to big for their tiny pots and showed some root stress. I transplanted them into 9 Liter AirPots which I had laying around from an old project. The substrate is a 70/30 mix of Canna Coco Professional and Peligran Perlite from Knauf. I love this stuff. You basically can't overwater it. I sprinkled the root balls with some Mycotrex from Biotabs (Mycorhizzae) Tbh I wast just too lazy to buy new fabric pots so I thought why shouldn't I use these old AirPots :-) We'll see how they perform. I also placed the plants in their "final" habitat which is a 120x120 (4×4 for my imperial friends ;-) and from now on they get fed by my beloved DIY-Ebb and Flow system. I built this 10 years ago and it's still a charm to have. Once a day the plants will get "flooded" with nutrient solution from a 200 L (52 gallon) tank below. Unfortunately this also means I can't tell you how much nutrient solution they received anymore as they just take as much as they need. This tent is climate controlled by an AC Infinity controller 69 so I should be able steer them way better. I try to keep them at a VPD of around 1.2. I have my AC set to 22°C (~71°F) and my humidifier keeps the tent around 62%. Offtopic: I had to evict a big Lemon Orange Mom to make space for the 4 Humboldt girls. I will have to cut her back in the next days. Upcoming: I'm going to top them in the next few days I will try to keep the tops as potential mothers if I hit the DNA lottery :-). My question for you this week: With which substrates and watering systems have you messed around so far and what did you like the most? Please tell me in the comments

La planta en prefloracion , no ha crecido demasiado , he tenido que retirar hojas en mal estado y la planta no bebe como debería hacerlo. Vamos a ver cómo evoluciona esta semana . Dejar vuestros consejos ,gracias !!!

Ciao a tutti e benvenuti! Questo è il mio diario «...there are many like it, but this one is mine…», diceva un famoso personaggio di un film (se non avete capito vergognatevi!🙄). Prometto che questa introduzione sarà rapida e indolore: sono Viking_s_Farm e vi basta sapere questo. 😈 Ora che ci siamo conosciuti, vi annuncio che questo è il mio PRIMO DIARIO (speriamo bene 🤞🏻🤞🏻🤞🏻). Il seme che ho scelto è di una Purple Punch della Fastbuds, casa produttrice americana che si occupa esclusivamente di genetiche autofiorenti. Ho scelto questa varietà in particolare perché le immagini fornite dal sito ufficiale erano molto interessanti… fiori grossi, compatti e dai colori incredibili (e certo, mica mettono foto di merda 😅) . Inoltre, a parte tutte queste belle parole, devo dire che ultimamente sono alla ricerca di un high più fisico e rilassante. Spero di poter trovare in questa piccolina tutto quello che cerco! Devo ammettere che le mie esperienze con altre varietà della stessa casa produttrice non sono state delle migliori ma sono convinto che oltre alla mia mancanza di esperienza abbia influito il carente spazio di coltura! Per questo, quello che vado a iniziare sarà un diario singolo. Quindi… iniziamo! SETUP: Growbox: Mammoth lite60 Lampade: Spiderfarmer led sf-1000 Roleadro led 300w Roleadro barre led 10w x 4 Trattamento aria: - Ventola immissione: Plumbing4home 100mm; - Ventola estrazione: Vents TT-100, ventola di aspirazione in linea da 100 mm - Filtro Carboni attivi - Ventilatore clip da 20 cm Vaso: Air pot da 12,5 l Substrato: terriccio Biobizz light mix con aggiunta di 20gr di Mykos extreme 22/12/2021 Come metodo di germinazione, viste le basse temperature (19°), ho deciso di utilizzare un semplice dischetto di torba inumidito con acqua tiepida e posizionato direttamente nel vaso. La lampada è posizionata ad un’altezza di circa 45 cm è regolata al 40% della potenza, un po’ più alta rispetto a quanto consigliato dalla casa produttrice per questa fase, ma per poter mantenere la temperatura al di sopra dei 18/19º non potevo fare altrimenti. 25/12/2021. BUON NATALE 🎄🎁💫 Babbo Natale non é ancora passato a darmi il regalo, confido passi entro un paio di giorni!🤞🏻 26/12/2021. La piccolina è germogliata 🎉🎉