Everything is ok Growing faster than i wish. I should defoliation again and put some clips tomorrow. Need some topping after almost a week. Its health and fine.

hello guys some news on the flowering day 49 She is fine and is the last week of fertilizer normally. next week flush with water harvest soon. 😀

First medical marijuana grow ever. I have gardened most of my life but marijuana is a whole different animal. I have organic bone and blood meal and tomato fertilizer (npk 4-3-8) that I was planning on using but my grow tent kit came with BioBizz Indoor Try Pack with Grow, Bloom and Top Max fertilizers. I think I may use my fertilizer on one and BioBizz on another to see which works best. Wish me luck!

Last few days till harvest Only ph-regulated water for the last week, no nutes ICC Looks and smells incredible, Lots of trichomes. Sweet Aroma HJ more herbal and gasy, unique for Sure Leaves gettin intense autumn colours. Nutes are pulled out of the leaves. 2 days left, then harvest the last two.

First plant, 174.2 grams, super excited, not real happy with how buds looked, not sure if gentics weren't the best for this one but has airy buds except for where the tops were. Still smokes good so no real complaints.

Week 15 - Flower Week 11 Lemon Jeffrey by IRIE Genetics (14 Starts for 8 Finishers) 63-70 Days Flower (9 - 10 Weeks) Weeks Observations: - Our light leak on July 6th through July 31 ‘cost’ us ~ 21 Days. Extending Harvest to account for 21 day light leak. New Harvest Date 12 Sep 2023, Plant Day 121, Flower Day 86 Seeds Wet: Monday 14 May 2023 Harvest Date Range: [ 2023-08-11, 2024-08-21] Start of week: - Dates: [2023-08-27: LJ2Q 106:F:11:1, 
 2023-09-03: LJ2Q 112:F:11:7 ] End of Week: - Plant Height Range: [46, in] - Water/Day/Plant: [935, ml] EnvironmentalCurrent: - Scotoperiod: [ 11, hrs] # 1900 - 0600 + 24 - LightIntensityPeak: [ 1000, µMol/m2/s ] - DailyLightIntegral: [ 42.1, Mol/m2] # Target: < [ 40, Mol/m2/day] - LightDistance: [ 6, in] # 3.5” LESS than Optimal for SP3000 - TempAvg: [79.1 , °F] - RH: [ 68, %] - VPD: [ 1.10, kPa] - 230*4*11/8 - FeedwaterPerPlantPerDay: [ 1265, ml] - Feedwater: [ 10.12, l] - EC: [ 2.0, mS] Environment NOTES: - RULE - CLOSE Room Airflow during LOW TEMP periods(2030 - 0700) - OPEN during HIGH TEMP Period (0700 - 2030) SOP: - WEAR CLEAN GLOVES FOR ALL SEED OPERATIONS - CLEAN All Instruments before use - Light Strengthvegetation := 100 + (#nodes * 100) - Light Strengthflower := [ 1000, 600, µMol/m2/s] - Scotoperiodvegetation := [ 1300, 1900, 6, hr] - Scotoperiodflower := [ 0600-1900, 13, hr] Environment - Late Flower (Week 10-14) (F5-F10) - Temp: 78-80°F - VPD: 1.2 ± 0.2 - Photoperiod: 11/13 - Light Strength: [930, 850, µMol/m2/s] - EC: 2.3 # Week F5-F8 - EC: 1.8 # Week F9 - EC: 1.1 # Week F10 - Finish (Week 14) ( F10) - Temp: 78°F - VPD: 1.3 ± 0.2 PPFD: 750 peak - Resin Bloom ONLY - EC: 0.8 _______________________ Base Application for 10 Gal: - [x] Primer A: [ 100, ml] - [x] Primer B: [ 100, ml] - [x] Silica Skin: [ 35, mll] # Reduce to reduce/eliminate Sediment - [x] SLF-100 (Enzymatic Root Cleaner): [ 50, ml] - [x] King Crab (Biology): [ 5, ml] __________________________________________ - @ EC: 1.7 Supplement: [ Application Rate], [ Total Delivery for 2 Gal Solution] - [ ] Primer A: [ 10, ml, gal], [ 12.5, ml] - [ ] Primer B: [ 10, ml, gal], [ 12.5, ml] - [ ] Silica Skin: [ 4, ml, gal], [ 5, ml] - [ ] CalMag Fuel: [ 4, ml, gal], [ 5, ml] - [ ] Peak Bloom: [ 4, ml, gal], [ 5, ml] - [ ] Resin Bloom: [ 4, ml, gal], [ 5, ml] - [ ] SLF-100: [ 5, ml, gal], [ 10, ml] - [ ] King Crab: [ 0.5, ml, gal], [ 1, ml] - [ ] EC: [ 1.7, mS] 85 ml/plant X 11, : 935 ml/plant/day, 2.4x of field capacity Meaning ALL Fertigation through pot is Refreshed 2.4 times per day with this schedule. ____________________________________ Mon 28 Aug 2023 # End of Harvest ORIGINAL Window , before discovering light leak LJ2Q 106:F:11:1 - [x] Will scope trichomes by hand, and set a chop date today. - Some are ready today, Some look to need 10 - 14 days. This has been an interesting grow - the extra stretch munged the SOG Strategy - with severe Chiropractics I still have >±12” of height per plant. We should be harvesting today . . . - We could conceivably take the grow as far as Day 139, if we calculate a 4 week light leak forward. That would make LATEST DATE 24 SEPTEMBER - - IF We go more than this week - Week 15 Nutes (Mixed Daily) - Mon - Wed: ONE SHOT, EC: 1.7 - Thus - Sun: ONE SHOT, EC: 1.4 - NEXT WEEK - Mon: Resin Bloom: EC: 1.1 - Tuesday - Harvest: Resin Bloom: EC: 0.8 - ELSE if we take them down next Sunday: - [ ] Been feeding The Rooted Leaf Hydro schedule, Base Nutes plus Silicon. Need to move to harvest nutes, potassium (+Resin Bloom/+Peak Bloom) at - [ ] Monday:+Resin Bloom/+Peak Bloom: EC: 1.7 - [ ] Tuesday: EC: 1.4, (+Resin Bloom) - [ ] Wednesday: EC: 1.1, (+Resin Bloom) - [ ] Thursday EC: 0.8 (Resin Bloom Only) - [ ] Friday EC: 0.8 (Resin Bloom Only) - [ ] Saturday EC: 0.8 (Resin Bloom Only) - [ ] Sunday - Harvest Growtek Mod - 170 ml/event per emitter -> 2 Gallons Input - ___ EC: [ 2.0, mS] Tue 29 Aug 2023 LJ2Q 107:F:11:2 EC 1.6+ - Defoliated (final) blocking and unviable fans. Looks better - clearer airflow Wed 30 Aug 2023 LJ2Q 108:F:11:3 EC: 1.6 For 2 Gal (ml’s) RLA Minerals 14.0 Primer A 14.0 Primer B 7.0 Silica Skin 10.5 Peak Bloom South Cascade Organics - [x] SLF-100: [ 5, ml, gal], [ 10, ml] ___ Plant Success (Beneficial Bacteria, Crab ‘Frass’) - [ ] Sunday - Harvest? - [x] King Crab: [ 0.5, ml, gal], [ 1, ml] Thu 31 Aug 2023 LJ2Q 109:F:11:4 EC 1.4 For 2 Gal (ml’s) RLA Minerals 12.3 Primer A 12.3 Primer B 9.2 Peak Bloom Required 1 qt to bring down from 1.6 to 1.4 Friday 01 Sep Jul 2023 LJ2Q 110:F:11:5 EC 1.1 For 2 Gal (ml’s) RLA Minerals 7.6 Primer A 7.6 Primer B 5.7 Peak Bloom Sat 02 Sep 2023 LJ2Q 111:F:11:6 EC: 1.4 Peak Bloom as Needed for Dilution - [ ] Scope Trichomes Last Time With a 21 day light leak, we’ll extend harvest to Day 118, Flower Day 90 - or 69 Unleaked Light Days . . . Through End of Harvest, Daily Daily Feed through Harvest Day -2 Per TWO Gallons: EC 1.4 - [x] Primer A: [ 12, ml, gal] - [x] Primer B: [ 12, ml, gal] - [x] CalMag Fuel: [ 4, ml, gal] - [x] Silica Skin: [ 4, ml, gal] - [x] Peak Bloom: [ 4, ml, gal] - [x] Resin Bloom: [ 8, ml, gal] - [x] King Crab: [ 0.5, ml, gal] - [ ] SLF-100: [ 5, ml, gal] - [ ] Reduce to EC 1.1 on Harvest Day -2 - [ ] Reduce to Resin Bloom Only, EC: 0.8 Pre Harvest Day DECISION - We’ll take the girls down Flower Day 83, Nominal Day 62 assuming 21 Day push for light leak. It’s not in practice3 that long - we should be good, if not - latest day 90 (Nominal 69) ____ Sun 03 Sep 2023 # Flower Day 77 LJ2Q 112:F:11:7 EC 1.4 - [x] Dismantle And Clean Res, Pump, Chiller, Lines - [x] Clean Res - [x] Clean Pump - [x] Load Res with a a gallon of HOT tap water, a cup of 30% Vinegar - [x] Run Pump for :30 - [x] After 30: Reverse Lines - [x] Run Pump for :30 - [x] Stop pump - [x] remove tubing from pump and chiller - [x] Remove pump, reclean - [x] Clean Chiller Tubes - [x] Rinse with 30% Vinegar - [x] When Dry: Reassemble & Replace

👌

💩Holy Crap Growmies , we are outdoors and in the Ground and there Doing Great💩 The Frosty is amazing 👏 👉It's been another full week 56 days from seed and she's doing great , very nice Growth, considering shes been up against the wind and rain 👈 No problems 😊 so far so good 👍And she's now in full on flowering 😁👈 weather been great , lots of sunshine 😎 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈 👉NutriNPK NUTRIENTS USED FOR FEEDING 👈rain water to be used entire growth👈 👉www.nutrinpk.com right now get 10% off using SPRING2022 as the coupon👈

F47, riego pH 6.3 y EC 1.5, cogollos grandes y densos, los tricomas ya presentan tonos lechosos, a un par de días de cortar. Bajé el rango de temperatura para que en las noches sea más frío, y las plantas se adapten al supuesto invierno que se acerca, de está manera, generando más tricomas. F50, las temperaturas mas bajas han aumentado los tricomas, los cogollos han aumentado su densidad, no se ven cambios en tamaño, pero algunas ramas se están doblando debido al aumento de peso. En 2 días más aproximadamente se hará el corte para empezar el secado.

She is now a skinny 17 inches tall. Defoleated all the bottom crap and cleaned her up. A little newt burn last week at 600 ppm. I have raised ppm to 680 so she may not be happy come the end of the week. She will have to get use to it. I'm sure she will be fine. Added second light, so it should get interesting.

ALL THESE PHOTOPERIODS WILL GO IN THE 8X8 TENT ONCE THE AUTOFLOWERS ARE CHOPPED AND I WILL SWITCH THE LIGHT TO FLOWER THEM IN THERE FOR MORE ROOM FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Starting the second week of flowering, first day! And they are beautiful.

I cannot wait for the harvest to begin… dam… this plant is doing the thing that make the pots to be done[South African Phrase], she has shot up, during my absence it’s like it was getting watered with nutrients and water mixture, and all she was getting was water. next week hopefully I’ll find the measuring tape and measure the height of this beautiful plant, my eyes cannot believe my labour, it’s fruits are becoming unbelievable, I hope that the bud is going to be big and juicy, I want to nothing but to smoke the best.

elles devraient être plus développées, j'ai eu un soucis avec mon ph mètre ce qui fait que mon eau avait un très mauvais ph, ce qui a entraîné des carences qui ont réduits considérablement la croissance. Je tiens à m'excuser auprès de @madamegrowfans @madamegrow.official @barneys_farm_products et @biotechnology_officiel qui ne sont en aucuns cas responsable de cette avancée au ralenti, c'est uniquement moi le responsable. #zenationcrew

Proyecto iniciado el 2 nov, fueron obtenidos 16 esquejes de Sweet Cherry pie planta fem. Serán iluminadas con LedCob 120w hasta enraizar y ser trasplantadas a maceta de 1 litro. Espacio de cultivo 80x80x1.80

Third week in bloom. Everything is going well. My only concern is that I have defoliated too much and my humidity is too high. Difficult to get it down when it's just raining outside. I'll see what happens... 19.12.2023 I've made some space and flanged my old 60x60x120cm tent on the right site and switched on another PC fan. I hope I haven't made a serious mistake. All fans repositioned. And everything is taped off so that no light comes in. That was too crowded. Next time 4 or 5 will be enough for me.

Week 2 of 🌹Flowering and some of Kaiydaan's sugar leaves look as though, they've been dusted with Confectioner's sugar. She still has no smell that I can recognize, however, she has a citrus/pine scent when you rub her leaves between your fingers. "Freeman", the 3rd girl to sprout, 2nd girl to 🌼Flower, and the girl we were attempting to manifold, is growing in healthy and strong. We weren't able to manifold her, because she began to show signs of 🌻Flower when Kaiydaan did, WAY EARLY. Not wanting to shock her, we ceased all topping and stripping. So basically we're left with a topped Auto that was partially stripped below the 3rd node. I think "Freeman" could have withstood the ⚡shock of multiple toppings, but I rather not risk that theory on a first grow. "J" is still in full Veg well behind "Freeman" and "Kaiydaan". We are still feeding full Veg nutrients to "J" as we taper off "Freeman" and "Kaiydaan". I don't have bloom boosters so we will be relying on our organic amended soil and organic fertilizers to get us through Flower. July 8, 2021 I defoliated and rotated the crop. "Kaiydaan" and "J" are doing very well and are getting stickier with every passing day. July 12, 2021 Monday. Things are progressing. Not much change, no stretching. "J" is still in full Veg, weeks behind "Kaiydaan' & "Freeman" with no signs of moving into Flower. I don't believe she is a Photoperiod, but just a different Phenotype from the others.