In the end I’m very happy how this first Grow went. Tomorrow I’m gonna finish the other half and update some pictures. Curing begins now, can’t wait to smell and taste the full cured terpens! 😋🌱

All going well with no problems. All are fading fast now. Most are getting close to harvest. Most be ready in next 7 days. Apart from super lemon haze probably be two weeks ppfd been around 900-800 Dli 38-35

Day 85 since seed touched soil. Trim jail !!! More than 2 meters of hanging buds , a bit airy, but amazingly smelly !!! Happy Growing !!!

Hello, here I am starting my second growth with a new secret room :) this is only my second growth, I hope I will succeed :)

As said before, I'm incredibly happy that I got to harvest a little bit. Never expected her to make it, but she kind off did! The smell was pungent and sweet like an amnesia haze should be, hoping that will be even better after drying and curing!

Left them alone this week except for a watering. First strong one I gave them. Found a mushroom in my soil a couple days later. Think I might have disturbed him because he died on me.

We have day 61 today, next update harvest 💪 --------------------- 👇 Week 8 (Pictures are from day 57+58 after 12/12, Trichomes pictures from day 60) - Just watering 1l / plant with calmag for the last 2 days. - PPFD at canopy height is approximately 750, with VPD around 1.3 - Harvest is around the corrner --------------------- Happy growing, and thank you for checking out my report! Your support means a lot to me! 🙏 --------------------- I appreciate every like and comment 👍👊😃

12.5.25: I watered with some more Trace again. She's feeding well and needs watering more often again. I upped the dose of Trace as I've noticed that there are some purple hues coming back on the stems. 13.5.25: I have removed all fabric ties on the plant. I think we have stopped stretching, so the sooner, the better. I keep getting my watering can caught in them all, and it was only a matter of time before I ended up snapping more branches off 😅 The fewer things in my way, the better 🤫 15.5.25: I watered today as the pot had dried out almost. The plant was watered with dechlorinated water PH'd to 6.5 with the following nutrients per 6.5 litres; ♡ 7ml Trace by Ecothrive ♡ 1/2 Tsp Sea K(elp) by Greenleaf nutrients The plants received the amounts below. HULKBERRY: 1l FASTBUDS: 2l NORTHERN LIGHTS: 3.5l I am not giving any further nitrogen at this stage. They had a couple of doses in the past week or so. I'm sure they don't need any more. So, I'm just using the kelp as it's packed full of goodness and high in potassium. I also suspect an excess of phosphorus. So I'm also leaving that out for the time being. There are still some red stems on the plants. added the Ecothrive trace for the last few waterings. I'm hoping it will resolve without any further intervention. 16.5.25: I watered Hulkberry with 1.5ltrs of dechlorinated water PH'd to 6.4 with: ♡ 1/2 Tsp Sea K(elp) by Greenleaf nutrients ♡ 7ml Trace by Ecothrive Measurements per 6.5ltrs. PPM: 670 PH: 6.4 17.5.25: I watered again today with 2ltrs of the above PH'D to 6.2. Parameters remaining the same. The plant is increasingly thirsty, so the waterings have again needed to be increased. As we're reaching deep into flowering, this is par for the course. I'm mostly using coco, perlite worm castings. Etc. So it's very easy for my pots to dry out. I need to keep on top of it. As the pots dry out, the microbes are lost, and so keeping everything moist and healthy is imperative. That's why I add Ecothrive Biosys regularly to ensure I keep up with the microbial life in the soil biology. To avoid PH lockout. 18.5.25: I watered again, with the same parameters as yesterday. Instead of Sea K, I used Ecothrive Biosys: 1/2 Tsp/6.5l PPM: 550 PH: 6.4 Thanks for checking out my diary and hanging out 💚✌️ 🍃 😊 🌱

Got some light flower trying to make it’s way out. ;) feeding is now twice a day, gals are hungry during this time around. Nutes are the same as last week. Nutes will change next week. Again everyone thanks for watching the grow up. 😎🌱💨🔥

From the very beginning she was strong and sturdy kept up great with growth and when it came to flower she just blossomed I think I might have cut her a little early but still the smell and bag appeal is top notch ! I give it 4 stars because I think the bag appeal could have been better but other then that this is a great strain!

Plantas muy facil de cultivar y muy rapida .. en solo 9 semanas me saque en la #1 85g y en la #2 - #3 unos 50 cada una... en cada foto teneis el seguimento de cada planta desde la semilla a los cogollos.. consejo para todos de el banco de sweets seeds ✌️✌️

Limpieza de bajos

Le hice un scrog sin pensarlo . Veremos si aumenta la producción...yo creo que sí !! La malla scrog de los Master : #kanovikultivo #greenwolvesfarmer

Yoo, finally we finished our first grow and Are very happy with the results. Anyone who smoked it says it's better then the Canadian stuff the people are selling here. We learned a lot while practicing and have already plans and improvements for our next grow. Once you have such a good harvest you will get addicted to it :)

This week has been a recovery week. Cleaned the roots in alien root rot x..turned lights down to 4x250w chiller still struggling..waiting for new big one..roots still look a little brown but nute solution is brown. New roots coming out of baskets nice and white and thick. Plenty of new growth. Keep topping and have added lst to try and combat stretch and allow light in. When running advanced ph perfect at half strength ph is too high at full strength ph drops back into the 5s. Ec at 2.8 but no sign of nute burn yet anyway..

02/23/2022 Lots of stretching this week,not much to say so I let the pics and videos talk for them selves🙏🏻 Enjoy Grape Skunk tall and lanky one I'm loving! I will number her for future reference. Biscotti Skunk has some droopy leaves, it's watering day.

Hey folks, I'm finally back at it again. It took me a while for a couple of reasons: 1) I usually only grow in the winter. 2) I completely revamped my grow room after the issues I ran into with the last setup. 3) It took me a while to brainstorm exactly what I wanted to do. I bought these seeds from D.C. Seeds and was very pleased with the experience. I'm very happy to give business to a fellow American and Veteran. I've only ever purchased seeds from the UK in the past and that experience has been "dodgy" to say the least (not the vendors fault, but the transit). I've only ever grown photo's, but chose to go with all auto's moving forward. After calculating the intensity of my current light, with it being on a 20/4 rotation I'm very close to hitting 40 moles per day, at least directly under the light. It doesn't quite cover my 2' x 5' trellis. I'll eventually upgrade my light, but auto's should get me the best bang for my buck with this light. Also, I spent a pretty penny building this new grow room. The other obvious reason for growing auto's is their shorter seed to harvest time. I've got a small grow area, and never plan on expanding. Theoretically, auto's will allow me to produce the most out of my room. A few things about my grow room: 1) I lined the whole closet with 1/2" plywood and put that piece of ply the air intake/outtake/power as the divider between each side of the closet 2) The grow room itself has ply on all wall surfaces so I could mount stuff to it and paint it 3) The other side of the closet is my storage/prep/power distribution/etc. area. Maybe I'll take a pic one of these days 4) My last grow my carbon filter/fan was venting into the other side of the closet. This created a headache for a number of reasons. I tapped a 4" hole through the floor and am now venting into my crawl space below the house. 5) I moved to bubbleponics to speed up my grows even more. I will be removing the drip system once the roots hit the water in the res. 6) The larger res. will hopefully make my life much easier. Late in the last grow I could only fit 3 gallons of water in the bucket and that sucker was pounding down at least a gallon a day. That required too much micro-managing for me (both ph and refills). 7) I no longer have a fixed trellis with chicken wire. The trellis is held in place by dowels that I can pull out by hand. The short sides of the trellis have hinges on the bottom, so I can fold it and pull it out easy-mode. Lastly, I'll be using string for the trellis so come harvest all I have to do is cut the string instead of dealing with trying not to destroy buds pulling them through chicken wire (it takes forever). 8) I built a light diffuser on the other side of the air intake 9) My res. is on a motorcycle lift I'm using a drill to move up and down I have now started using Jack's as my primary nutes. They tell you the full break-down of each macro and micro nute, giving me more control and understanding. I think House & Garden is a good product, but when stuff goes bad it's more difficult to troubleshoot when you have no idea what each piece of their full lineup contains. I'm assuming it's kind of a proprietary type thing, which I understand, but knowledge is power. I am still using their Drip Clean (while the bubbler is going) and Roots Excelurator Silver, both excellent products. I'm still using Hydroguard, and will FOREVER. I'm a true believer now of why Hydroguard is necessary for any hydro application, IMO. I also purchased water soluble fulvic acid, but have decided not to use it for this grow....or at least while the bubbler is going (I'll elaborate below). Ok...now that all that is out of the way.... I really wanted to use my well water instead of R/O to make my life easier. Soooo....I filled up my res., and put two seeds in the system immediately. Nothing happened after 1 1/2 weeks. I finally opened up the cubes and saw that the beans had popped, but it looked like maybe I drowned them, or they ddin't grow straight up or something. For round two, I didn't change the water out, and decided to soak the beans for 24 hours in R/O water first. I had the exact same problem. I'm still not really sure what happend, but I suspect it was the well water. My PPMs were sitting at ~500 with the well water, which was probably too spicy for the beans just starting. Also, my well water is questionable (even though it's at 165ppm), but I won't elaborate further....it's a long ass story and I've spent an absurd amount of money on it. Lastly, I did put the Fulvic acid in, and it was very messy. I really want to avoid having to clean my res. Once the roots get big it will be a real pain in the ass to clean. I'm leaning towards not using the Fulvic acid this grow just to see how things go. I had 10 beans total of the Sour Apple and have already ruined 4. So here's hoping third times the charm. So, I went back to my tried and true method: 0) R/O water for everything. Ditching the well water idea. 1) Soak beans in R/O water for 24 hours 2) Paper towel method between plates on a heating mat 3) Once the roots pop, I place them pointed down in the hole of the rockwool cube 4) Hand water once a day by dipping the cube in the pre-mix of 1/4 strength Jack's and everything else I've listed above. This put my PPMs at 300...a way more reasonable value for starts. It's been exactly 7 days since I followed the above. It's probably hard to see but the cotyledons came up, and multiple roots have come out the bottom of the cubes....way faster than I've ever seen since I started growing. That means even though I'm doing my old process this already shaved at least a week off of when I'd normally put it in my bucket in the past.

Yellow big leaves . Buds 🙂 ok . No nutrients start flush with bud Candy . Great happy qeens 😍 best wishes 👏