Likes
Comments
Share
Currently checking daily and tying away branches/leaves to give the buds more light and watering when the soil is dry. Currently my plants drink exactly 1,5L a day. I have the feeling that the right plant is lacking a bit of potassium. I'll leave everything as it is for now because the left plant (fresh new soil) is growing well. Since the right plant is quite bushy anyway, I'll defoliate it again later and remove any lower shoots. I started adding the Bio PK booster towards the middle of the first week of flowering, 2ml per liter of water; as the pH value drops too much, I correct it upwards with Biobizz pH up - from pH 5.5 to 6.5 for 3L, I add a total of 39 drops. My water is mixed as follows: 3L osmosis water, plus 6ml CalMag, 6ml BioPK 5-8 and 39 drops of pH + BioBizz.
Likes
63
Share
@Targona
Follow
Targona: 57 days since my little girl sprouted from seeds🌱 Eighth week of growing my Apple Fritter Automatic 🍎🍏🍎 Nutrients: As I mentioned last time, I switched to mostly organic nutrients from Plagron and Biobizz💓 - Plagron Alga Bloom - is a complete fertilizer designed exclusively for the flowering phase. It contains all the important substances that the plant easily absorbs 🌸🌾 ---------------------------------------------------------------------------------------------------------------- Plagron Sugar Royal - Sugar Royal is a supporting enzymatic fertilizer designed exclusively for the flowering phase. It contains hormones, enzymes, vitamins and trace elements necessary for proper flower development🍭🍭🍭 ---------------------------------------------------------------------------------------------------------------- Plagron Green Sensation - Green Sensation is a professional flower stimulator and activator. It contains all the necessary ingredients to support flowering and also the formation of sugars, and thus the overall yield 🌊🌿 -------------------------------------------------------------------------------------------------------------------------------------------- JUNGLE X Environ is a highly effective complex preparation for stimulating flower formation. 🌸🏵️ ---------------------------------------------------------------- ------------------------------------------------- BioBizz Bio pH - is an organic pH regulator. An aqueous solution of citric acid, which is naturally found in citrus fruits 🍋🍋 - I didn't use it this time, because the pH of the dressing was 6.5 + ---------------------------------------------------------------- ------------------------------------------------- BioBizz Calmag - 100% vegan and certified product Calmag is made from calcium carbonate and magnesium sulfate, supplemented with humic acid. Unlike other products, the all-natural Biobizz CalMag does not contain any nitric acid and therefore does not affect the NPK values ​​or EC of the solution 💩💩 ------------------------------------------------------------------------------------------------ Terra Aquatica pH test kit - Very reliable, easy to use and inexpensive. The pH Test Kit conveniently replaces expensive pH meters. It includes a wide range from 4.0 to 8.5. 🌈 General: Apple Fritter Automatic 🍎🍏🍎 - The plant is getting more and more beautiful, its buds are getting thicker, they are really all white, as if they are covered in sticky resin. The stem, leaves and buds have turned a little pink. I wondered if it was a lack of phosphorus, but based on the nutrients I give them and the overall pH, which is 6.5, I assume that this is the classic coloration of the plant during maturation. 🌱🏵️💚Nevertheless, I preferred to add Calmag to the watering yesterday and also feed it with Alga Bloom in case it lacks important elements. Training: The plant is very tall. Sometimes I turn it all over so that the light also shines on the side branches on the side of the tent. Otherwise, I don't do any training, I just cut off some excess leaves in the classic way. Plus, this girl doesn't have many leaves, she's a beautiful genetics as usual with strains by Zamnesia 💚🌞🌞 Light: Mars Hydro TS1000 The plants respond effectively and the light is technically very well managed - I try to have 18 cm between the light and the plants, so I move it up regularly 💡💡💡 Thanks for the likes :) See you soon 😍😍
Likes
6
Share
@sedygrows
Follow
After another week of waiting, she finally decided to bloom. In the next few days i‘m going to change the water and add more nutrients. First experience with silicia. We‘ll see 😋🏻
Likes
5
Share
@tNASTY3k
Follow
Day 14 - She's thriving it seems so far. She's bursting with tri-leafed nodes. I've changed the environment a bit. I have not been successful cooling the room enough to bring down the VPD from 1.3kPa or so. Instead I'm approaching it from a humidity perspective. I have the threshold up to 70%RH. I'm peaking the humidity to lower the VPD to .9kPa since I can't really effectively cool the tent to the low 70's. There is a slight aroma from the seedling. The infamous skunky smell is only observable when very close to the plant. I have not been using the filter on the exhaust fan though.
Processing
Likes
47
Share
@rhodes68
Follow
11/3 Week 6 Watered roughly one gal each @6.5PH, Fish Sh!t 5ml - Karo 1 tps /gal Flower Girl still in the pot, no deficiencies I can see, well new ones :) Mag-Sulfur Foliar spray (Epsom Salt 1tbs/gal) on all as leaving cal-mag out this time Moved the two healthy plants to the center of the light, they can use it, the others might respond well to lower levels. 11/4 Better pics uploaded Placed Brandy on a block of coco coir to bring her canopy up to Layla's level. Moved Maggie to the corner she has a stretch going that I HOPE is ending and I dont want to set the lights to her. Watching that plant carefully Considering a PK boost watching only Layla for that as the other two ... well hell what can they tell me? 11/5 Working to getting the canopy under control with one stunted plant and another stretching like crazy. Put a block under Brandy to move her up level with Layla. Trained down Maggie this growth needs to end, it was already stressed. Still giving light pref to healthy plants. 11/6 Raised lights three clicks, increased extraction, showing some heat stress in those edges. 11/7 Good results on the heat stress curling has ended. Noticed some improvement also in the tops of Brandy and Maggie, so raised lights another couple of clicks. See if it continues, coming up on a make or break feeding in couple of days. update Foliar Feed All - Epsom Salt 1tbs/gal Well Maggie's came today - To runoff- 1% peroxide - 5ml CalMag - PH 6.8 Hitting Sulfur as hard as I can. Before pics posted Brandy not dry enough waiting Layla just got fed but she got pics too as there are signs of Mag deficiency 1 gal 6.5 PH - CalMag 5ml - Fish Sh!t 5ml - Bio_Bloom 5ml as a PK booster JIC 11/8 Video of plants 24hrs after giving Maggie the h2o2 1% , think she looks better lets see how it goes 11/9 48 hrs after treatment and Maggie is showing great improvement, serious improvement in leaf structure and coloring. Pics at lights out tomorrow new week anyway. Brandy showing some improvement but its early. Canopy is level now so lights set to Maggie being slightly taller ***Last update before the new week.*** May have found ONE of my problems,certainly not THE problem, but one. I have been using lemon juice as a PH UP since we went organic late last spring. Because of all the problems I have been looking into a lot of things further and found that lemon juice begins to degrade as a PH up after as little as an hour. A 6.0 PH water gallon can go to 6.5ish in 24 hours simply sitting in a dark corner in a jug. One can imagine the variances in soil. Why I dont know but I am going back to chemical PH additives post haste in fact its already done.
Processing
Likes
7
Share
@Kushizlez
Follow
Day 45-52 (Day 46) I just realized I forgot to zip up a small flap in the tent for at least 5 days or so. This probably made the added co2 useless. All the plants are slightly clawing and almost look overwatered, which is normal for plant at this stage but I wonder if the lower co2 levels are contributing at all. I couldn’t help myself today and did a small defoliation. Hopefully this doesn’t stress them out too much. I took about 15-20 leaves per plant. I really want some of this larf on the bottom fill out more. Even by 10-15%. (Day 47) Wow. I just noticed that #5 is putting on a thick layer of late frost. I’m guessing this has to do with all the mid flower feedings. Unfortunately the density on this girl lacking big time. Especially on the lowers. This could be genetic but there is too many variables at play to say for sure. If this stuff smokes proper I will continue to feed in mid flower. Plants are really starting to fade out here now. #3 in particular has some odd red coloring in a few of the leaves. (Day 48) I watered in 2 gallons on each plant making sure to get some decent runoff from each. Sucks that #3 didn’t fill out. The genetic potential was definitely there, something just went awry after that tea I gave it. I have at least 2 or 3 clones of that I will try outdoors. It’s been a very P hungry plant too. The stems were purpling like crazy, even in veg. Some people say this can be fixed with a microbial product like Mammoth P or Tribus which I might try for my next grow. #6 isn’t really filling out much either unfortunately. Tops look decent but everything under that is pretty leafy and airy. #1 and #7 are the clear winners here. #1 especially is picture perfect. If I wasn’t working on another project after this I would clone just #1 and run another scrog like this from clone. (Day 50) I was plucking some leaves today and I found a confirmed banana sticking out of one of the main colas on the stubby pheno. I didn’t defoliate this one too much so I wonder if it was caused by stress at all. I hope I don’t find anymore because we only have 10 days left here. (Day 52) My family member trimmed up the m39. It looks super scraggly but has some decent crystal nonetheless. That’s partly why I would never use an amazon blurple for flowering. It just doesn’t have the same canopy penetration that a light like mine does. Although for a budget setup they’re pretty awesome.
Likes
3
Share
@CheeRz
Follow
We are nearing the finish line! Both ladies look great, and the delicious aroma wafting from the tent brings a smile to my face every time. I think we should finish the run in about two weeks. 🍋🍋🍋
Likes
Comments
Share
@tea420
Follow
A wonderful aroma of lemony cake batter slowly fills the air.
Likes
14
Share
@Simsim
Follow
Hi Guys ! The plant suffered of a Nitrogen/Calcium deficiency, so I fed her with more FloraMicro and I raised the CaliMagic dose for the past week. She's lookin fine today ! I think I killed all the bugs, I added some Neem Powder on the top of the soil and 3/4cm of clay peebles ! The blooming really starts and this little girls starts to smell weakly. I just remove the leaves that covered the Bud, and I did some LST that works a lot ! See you next week, keep on growing !🕉️
Likes
9
Share
@Rizik86
Follow
Day 50 - Checked PPM 1,030. Added 10 mL of CalMag Micro Grow and Bloom. Added 5 mL of Big Bud Sensizym Bud Candy Nirvana Rhino Skin and B-52. PPM is 1,550. Plant is 51 inches. Raised the light to its highest position. Tons of bud production. Day 51 - Checked PPM 1,590. PPM went up so i diluted with RO water. PPM is now 835. Plant is 52 inches tall. Leaves are getting glossy colored and sticky. Day 52 - Checked PPM 1,560. Diluted again with RO water. PPM is 725. Bud production scaled up. Green mass forming between white hairs and sugar leaves. The stock reminds me of the body of a lizard. Plant is 54 inches tall. Day 53 - Checked PPM 1,130. Added RO water. PPM is 650. Added 10 mL of CalMag Micro Grow and Bloom. Added 5 mL of Big Bud Sensizym Bud Candy Nirvana Rhino Skin and B-52. PPM is 1,620. Plant is 55 inches tall. Tons of white hairs. Bud production everywhere. The mylar emergency blanket allows the light to penetrate deep and low into the plant. Day 56 - Water nearly gone. Added 2 gallons of RO water. Added 20 mL of CalMag Micro Grow and Bloom. Added 10 mL of Big Bud Sensizym Bud Candy Nirvana Rhino Skin and B-52. PPM is 1,690. I can see trichome production (frosty buds and sugar leaves). The hairs are still white. Light is 2 inches above plant. Light is nearly against the ceiling. It stays this way til harvest.
Likes
8
Share
Me costó adaptarme a la cantidad de agua que necesitaba, prácticamente 1.5 litros todos los días. Temperatura 23-25 centígrados, HR 45%. Me pueden contactar por ig @federicocabreraf , por si quieren saber mas detalles o algún comentario que me quieran hacer, paz.
Likes
11
Share
Day 31 - What a healthy green plant like always , the petioles of the leaves are purplish but it is pretty commun for that strain so we are far from a magnesium deficiency here. The smell is the typical deep citrus one from that strain. The trichomes production is already huge and we are barely half the way now so imagine what it will be in 4 weeks 😍
Likes
3
Share
@Ninjabuds
Follow
My Sticky Rice plant is still on the smaller side, but it's got a really strong smell, and I love the look of its leaves. It's been a challenging week with the constant rain and ridiculously high humidity. Keeping things dry indoors has been a real struggle. Despite the weather, I managed to flip all my feminized photoperiod plants to flower this week. I'm hoping the switch will go smoothly, but with this humidity, it's going to be tough.
Likes
218
Share
@DevilsBud
Follow
Week 9 of Critical RQS Day 57 FLUSH WEEK!!!!! I have decided to flush the critical. Normally the critical needs 7 to 9 weeks of flowering and on week 9 . I don't see a lot of white pistils anymore and tricomes are all cloudy and some ambers it's going to be a exiting week. Day 58 Flush the plants and run off had a lot of nutrients in it so have to flush for quit a bit Day 59 Drying the soil out some and then do big flush again hopefully i will get those nutrients out other then that critical is looking awesome 🤘🏻😎🤘🏻 Day 60 Flush them again today and getting the nutrients out of the soil I probably have flush at least for a week i had bin a bit lazy checking with EC meter and now i have to deal with it i don't like to be inconsistent but is was a bizzy week Day 61 Sunday rest day nothing going on 🤘🏻 Also want to thank everybody for the comments likes etc you know who you all are 👍🏻😍👍🏻 visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Fully marshydro supported Setup: Marshydro GT100X100X180 Marshydro Ts 1000 LED lamp soil :Plagron batmix Nutrients :Advanced Nutrients Advanced Nutrients pH Perfect Bloom Advanced Nutrients pH Perfect grow Advanced Nutrients pH Perfect micro Advanced Nutrients B-52 Advanced Nutrients Voodoo Juice Advanced Nutrients Rhino Skin Advanced Nutrients Big bud Advanced Nutrients Bud candy Advanced Nutrients Overdrive Advanced Nutrients flawless finish Advanced Nutrients Sensizym BioBizz - Calmag Mars Hydro tent handy info Lock All Light Inside: MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. Durability Grow Tent :Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. Easy Observation of your Plants: Special peek👀 window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. Removable Tray Keep Clean: The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof cleaning easy. Good Ventilation&Fast Assembly: Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter.
Likes
16
Share
@Dr_Rook
Follow
Han aguantado a la perfección los errores de un novato en interior cómo yo😌 tuvieron un ciclo vegetativo un tanto turbulento con estrés lumínico, estrés por frío, hídrico también ya que las llevabas demasiado cortas de agua y causa de esto un ataque de araña roja 🕸️ a pesar de todo han florecido a la perfección dando 95g en seco de un producto de muy buena calidad 🤩 Ha sido un placer compartir mi primera experiencia en interior con vosotros. Con ganas de empezar el siguiente y seguir aprendiendo y mejorando
Likes
4
Share
@KaliWeeD
Follow
Pues al final… algunas engordaron mas que otras, ya no las queda mucho tiempo…
Likes
2
Share
@Cornfed
Follow
This week I added a new controller to handle up to 8 functions. I installed a new heater, my old humidifier and some LED strips to the controller. Targeting a VPD at 1.0 day and night. Trying to keep the nutrient ppm under 900 and ph at 6.0 in the reservoirs. Ordered a second ph pen because I don’t trust my readings. Will be here by Thursday. Friday: Checked the ppm in the reservoirs and it’s at 1,000. Added more RO water with extra nitrogen to bring the ppm level down to 925. Saturday: I installed an updated AC Infinity controller 69 Pro Plus (controls 8 pieces of equipment) which allowed me to add a humidifier, corner LEDs and a heater to the controller. Overall I’m extremely impressed with this AC Infinity equipment. My VPD is within the range I want to achieve (.8-1.1). I programmed it to maintain 78 degrees and 67% humidity during the day, 73 degrees and 63% humidity at night. Charts posted also show the impact of an open tent compared to the closed environment. The heater is constantly pushing fresh air into the tent, so I don’t need to cycle the exhaust fan often. Rewired the tent again and moved the controller later that night. I mounted the controller on the wall. Added Mars Hydro UV/IR lighting to fill out all 8 slots on the controller. Sunday: I checked the ph in the reservoirs (6.8….i had filled it with 6.0 ph) and the ppm (1200 ppm…I had filled it with 900). So evaporation and possibly a mismeasurement of ph. I topped ff reservoirs with slightly stronger nutes and adjusted ph to 5.8 in the reservoirs. Poor magnesium absorption could be driving some leaf yellowing. Effective tomorrow, I’m switching over to Heads Formula which consistently feeds GH Flora series nutes at Micro (6ml/g), Bloom (9ml/g) and cal mag (3ml/g). Turned on the UV/IR lights for 3 minutes every 8 hours. I’m easing the plants up to 5 minutes every 6 hours which will provide the recommended 20 minutes of IR per day. This will help the plants stretch a little more. Monday: checked ph and ppm in reservoirs. 6.1ph and 880ppm. VPD remains stable except when I open the tent. Tuesday: checked ph (6.4) and ppm (880) in reservoirs. Added .5ml of ph down to two reservoirs. Still see slight yellowing between the veins but it’s not getting worse (might be improving). Adjusting ph down to 6.0 target might have solved this. The plants grew by 1-2” last night…..is the infrared light working already? Decided to mix up fresh nutes for the reservoirs following Heads formula. 6ml Micro and 9ml Bloom per gallon of RO water. Added 5 ml of CalMag too. Ending ppm was 1080 which is too high, so I diluted down to 880 with RO water. 6.0 ph. Wednesday: plants grew another .75 inches last night. I topped above the 5th node. Thursday: added RO water with heavy cal mag to reservoirs to increase amount of CalMag available.
Likes
54
Share
This is the last week. They are currently in the dark getting ready for Chop, Chop in a day or so. Only doing water this week. Checked my TDS and it was around 80PPM. Pretty low since we have added the RO system. The smell hits you when you open the cab like a freight train. Some smelly treats in there! Going skiing in a couple weeks. So stay tuned for next grow! 😎