Likes
Comments
Share
@Sinktip
Follow
Pretty happy with progress on the flowering. No idea how much longer it will take but I ran out of fertilizer. Will head to the local hydro store to pick some more up today. The large spindly plant is still growing. It's about twice as tall as the others and nowhere near as far along with the flowering - at least the buds are still much smaller. No idea what variety - a mystery plant!
Likes
8
Share
Likes
12
Share
Did some defoliation this week, not much but enough to create some airflow and unblock a few bud sites. Readjusted my DIY “floating” to take up some of the stretch that had gotten out of control, ❤️ that I can do that! The frost is real for this strain OMG, week 3 and it’s already as frosty as some of the Autoflower’s I have grown. Temps have been climbing here and there, we’re getting a lot of dry heat so that’s the plus at least, not a lot of humidity at the moment. I’m really wishing I had taken clones from these girls because I’m sure they are going to be insane if they look this good at week 3. 🇨🇦👊❤️
Likes
21
Share
Well this week was really stressful, one of the girls started showing stress in the lower leaves right after I attempted some fimming on her, the nutrients I was waiting for haven't arrived except for some calmag which I think they are lacking... Topped the rest of them just today, hopefully they'll respond better than their sister... thanks to anyone reading this, happy gorw!
Likes
19
Share
Let’s go Day 46 from seed!! What a great week it’s been, girls structured up real nice veg has been huge for us, looking super healthy an catching a nice smell ! This will be the last week of feeding them the veg schedule, next we will be dipping right into bloom, starting Monday yall We will be in full bloom !! Can’t wait to watch these ladies stack over the next few weeks 😍! I hope you all enjoy an have an amazing productive day an week ! Peace love an positive vibes y’all Cheers 😶‍🌫️💨💨💨💨💨🤙🏻
Likes
2
Share
Trimmed alot of dead leaves of today . Going to run 2 more days then light out. Stacked on a lot of weight this week. Looking forward to finally being able to smoke only a couple of weeks away
Likes
11
Share
@Tuki3
Follow
Hermoso el proceso, la verdad cada vez me gusta más todo lo que involucra al mismo! atencion, detalles, etc. Las chemical bride como verán salieron 2 fenotipos diferentes, uno con hojas más finas (tirando a sativa) y la otra hojas mas gruesas y las flores aparentan ser más "comprimidas". El olor que siento cuando toco las hojas con Resina es muy muy sabroso, realmente parece un caramelo de ananá (muy dulce, hasta empalagoso diría). En estos días voy a intentar subir un poco más el panel porque está muy cerca. Muy contento realmente con los resultados que vengo observando!
Likes
13
Share
@DreamIT
Follow
Sponsored by: 🏡GANJA FARMER SEEDS🏡-💡VIPARSPECTRA💡-💐GREEN BUZZ LIQUIDS💐-🛠️WEDRYER🛠️ 8/7 After several days of Growdiaries making it difficult for me to write and respond to comments, I found that I can still update the journals. I apologize to everyone for the non-replies but I have replaced the main email and the email to confirm the account never arrives, and Growdiaries' customer service seems to be non-existent 10/7 everything is going well, nothing special to add🤘🦄 12/7 everything goes perfectly, one week before cutting __________________________________________ Personal advertising (contains affiliate links) __________________________________________ 🦄 Huge collection of exquisite genetics since 2009! Anonymous shipping! ✅https: //bit.ly/Ganjafarmer __________________________________________ Did you know that Green Buzz Liquids fertilizers are 100% vegan? A complete line of products ready to give the best to each of your plants! Visit the site and see my journals to see how they work 🦄 🤯 And with the code "dreamit" you will immediately receive a 15% discount on your purchases ✅https: //bit.ly/GreenBuzzLiquidsPro __________________________________________ 👀 Are you looking for a good lamp to start with? 👀 🌞Viparspectra has something more than the others, take a look at their site. ⏩ Use "GDVIP" for an extra discount or "DREAMIT3" for an extra 5 %% discount 👀 Search for it on Amazon ✅Amazon USA: https://amzn.to/30xSTVq ✅Amazon Canada: https://amzn.to/38udUVe ✅Viparspectra UE: bit.ly/ViparspectraUE ✅Viparspectra USA: bit.ly/ViparspectraUS ______________________________________________ 🌈 Tired of blowing on your weed hoping it dries quickly? Check out the Wedryer website! You will find a well-made accessory that will help your weed dry in just 8-10 days without the annoying risk of finding mold or other annoyances! (no affiliate links) ✅https: //bit.ly/Wedryer_ ______________________________________________ 📷🥇Follow the best photos on Instagram 🥇📷 https://www.instagram.com/dreamit420/ Backup ig https://www.instagram.com/dreamit4200/ 🔻🔻Leave a comment with your opinion if you pass by here🔻🔻 🤟🦄💚 Thank you and good growth 💚🦄🤟
Likes
16
Share
Week 6 flower, half way there! Buds are starting to fill in now and getting some decent frost. A couple of tops are getting more light than others, and fattening a bit more and looking real nice. It looks like there is some purple starting to come out at the tops. She is strong and will go as fast as the soil and environmental conditions will allow her to. Hand watered in Gaia Green Soluble Seaweed Extract 0-0-17, otherwise water drip is running on same schedule. Just using straight tap water that sits in a 30 gallon reservoir with a submergible water pump running 24/7 breaking surface and aerating water. Water comes out the tap @ 7ph and less than 15ppm. So I don’t do nothing to it, I drink it:) Thanks for the view 🤜 Have a great week!
Likes
4
Share
Likes
9
Share
The first week of vegetative growth has passed, the seedlings are recovering from the shock of repotting and the growth has slowed down a bit, probably due to the growth of the root system in the new soil. In this second week I hope to get to the fifth node to start some lst. Irrigation / fertilization: I continue with the same light solution as last week with the addition of root stim 1ml / l to promote rooting. 0.1-2 l every 2-3 days. 20/01 150ml each plant of 8ml/l plant start 1ml/l root stim 1ml/l calmag pH 6,2 23/01 150ml each plant of 1ml/l calmag pH 6,0
Likes
52
Share
Flowering day 3 since time change to 12 / 12 h Hey guys . My cutting heating broke 3-4 weeks ago, which was fixed immediately and everything went wonderfully. Now, 3 days ago, the central heating broke down in the entire room, so that at night I only have temperatures of around 13 degrees :-( . One or the other lady is slowly starting to see a phosphorus blockage, as this can no longer be absorbed at temperatures below 15 degrees, like many other nutrients :-( . A friend looked at the heating yesterday and came to the conclusion that a real company had to do it, which is by no means possible for a stranger to enter my room. I quickly ordered heating mats for all the boxes so that the ladies could at least get warm feet. That's all I have this winter full can do . Let's hope everything will be fine 🙏🏻. As soon as the heating mats are attached in the coming days, I will post them in the pictures. Now for the update. Despite the severe cold, the ladies are still doing well and have made good progres . The ladies only had to be watered once this week, each time with 1 l, because it absorbs the water very slowly because of the cold and I don't want to overwater it. I took every single plant in the pot to take a close look at their roots. These are snow white and look very healthy 🙏🏻. It was also the last time neem oil sprayed so that the last trips are finally gone. Otherwise everything was checked and a lot of planning was done, like I do with the heating mats. Since a friend had the same problem in one winter and the heating mats got 10 degrees plus on the pots, I am very confident that it will at least bring something for the last cold month 😃 🙏🏻. I've started flowering even if some are still a bit small, but otherwise they'll get too wide from training and end up taking up space :-) until then have fun and stay healthy 🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.ripperseeds.com/en/feminized/kmintz-feminized-cannabis-seeds Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.4 MadeInGermany
Likes
5
Share
15th day into flowering- Trim some Fan leaves /anything cover canopy. 18TH DAY FLOWER- LOLI POPPING. JUST WATER EVERY 3 DAYS PH 6.5
Likes
5
Share
The little genetic fuck up still going , And actually smells pretty good too , still feeding for now but keeping a close eye on those milky mushrooms , As soon as they are 💯 milky and say 10% amber I will start too flush ,
Likes
327
Share
@FoTwenny
Follow
Fo' Twenny here! Welcome back to my garden! Thanks for following me on this 16 strain photoperiod SOG grow adventure! We have 18 strains running with 2 regular strains, I want to be sure we can fill up the whole SOG. 9/7 - Just to recap last week. 9/5 I transplanted from the 16 oz solo cups into a one gallon 8" tall Active Aqua 6" x 6" Square Pots. Today, I topped and defoliated. Everything is looking good, now just waiting for them to bounce back. Hoping to be ready for flower within next week or two. This is my first run using a modified SOG method, and not sure how long it will take for them to be ready. Ideally I'd like each main growing shoot to be about 12" or so before sending to 12/12. BAD NEWS: Half of the blue diodes have gone out in the TMLAPY light. This light was actually gifted to me shortly after a friend purchased it from Amazon and realized it was too small for their space. It seemed to be serving it's purpose well for vegging photos and running bumper crops of autoflowers but it failed only four months after the warranty period ended! Weak-Sauce! Welp, looks like it's time to upgrade the 24"x48" tent to Samsung LM301H boards. I ordered a 320w straight single piece heatsink with 3 boards from Geeklight. I went with the 3k spectrum and switchable UV/IR since all my autoflowers bloom under this light. RHIZOSPHERE: .25 tsp/gal Blue Planet Gold Shield Silica Supplement .25 tsp/gal Fox Farm Gringo Rasta Cal-Mag 1.5 tsp/gal BigBloom .25 tsp/gal Boomerang .125 tsp/gal Wholly Mackerel PPM: 749 pH: 6.4 1 tsp/gal Southern AG Garden Friendly Fungicide compare to Hydroguard 2 TBSP/gal Serenade Thanks for stopping by my garden! Please check out my other diaries & give me a follow! Happy growing my friends! ☺️🌱 Peace, ☮️✌️ Love, 💚🤟 & Frosty Nugs! ❄️🌲 - Fo' Twenny
Likes
25
Share
@Lukush
Follow
Hey growmies all is good and mi baby girls are loving life!! Gonna start giving them some nuts in a couple days 👍 Thanks for passing along have a good one growmies. Check out the sp 6500 on website 👍💪👍https://marshydro.eu/products/mars-hydro-sp-6500-led-grow-light/ SP6500, as one of the huge single bar LED grow lights, installed with top quality Samsung LM301B diodes, designed with enhanced red in broad-spectrum light, emits the highest central PPF and has the superb penetration that its major applications are for high-wire plants and greenhouses. Wattage – 650w Veg Coverage – 4×5 ft Flower Coverage – 3×5 ft Featuring a thick aluminium passive heat sink and densely arranged chips, the SP Series provides high efficacy but low heat output while minimizing obstruction to natural LIGHT!
Likes
116
Share
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 10/21/20 😻 We're documenting a day early because we'll be gone for a weekend camping trip...The plants are progressing beautifully and perpetually praying, they're absolutely loving this new MarsHydro! We decided to move the light from 24" to 30" to try widening the nodes a little before dropping back to 24", we're in unamended Promix so we typically start thinking about feed this week but being autos we're going to take it slow and wait on color ques before making that move (probably next week for sure)...thanks for reading and happy harvests everyone!! ❤️💡🌱😽💨 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~ 10/25/21 😺 We gave all plants a very, very light feeding (<3ml/gal) to see how they tolerate it, its super early but a few were already beginning to wash out ..We started bending plants today, low stress only for these girl and everything looks great so far! This MarsHydro is intense, the node spacing is extremely tight on all plants and growth has been really steady (especially these last few days), we couldn't be happier! Thanks for reading and love all around growmies!! 😻 ❤️💡🌱.. ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: >50k hrs ⌛ Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 Weight: 10.1 lbs (4.6kg) -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 30 of these lights can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_