🌱 Amnesia Skunk — Grow Update Week 6 From Seed · 12/12 From Seed (Early Flower / ~Week 2 Flowering Transition) Quick Recap (for new joiners) This run is 12/12 from seed, and we are now at Week 6 from seed, which places us roughly in early flower / second week of flowering transition, depending on how one prefers to count. No aggressive interventions, no forcing. This grow is based on observation, leaf positioning, and letting the plant express herself naturally. Amnesia Skunk has shown: • Strong vertical intent • Beautiful internodal spacing • A structure that responds extremely well to simple leaf bending She is clearly in flower mode now and transitioning smoothly. ⸻ 🌡️ Environment Update (and Why It Matters) • Day temperature: ~28°C • Humidity: ~65% Outside temperatures are still on the cooler side, but inside the room things have shifted naturally. As plant mass increased, lighting intensity was raised, and under-canopy lighting was introduced, the room itself became a stable heat source. This allowed us to raise temperatures without adding external heating or forcing conditions. This balance is important because it keeps plant metabolism active but relaxed, especially during early flower. VPD Perspective At ~28°C and ~65% RH, we are sitting in a comfortable early-flower VPD range, supporting: • Active transpiration • Nutrient mobility • Strong gas exchange Nothing extreme, nothing restrictive. ⸻ 💡 Lighting & Atmosphere (Why These Numbers Work) • PPFD: ~600–850 (depending on plant size and position) • CO₂: ~900 ppm The PPFD range allows: • Smaller or lower sites to stay productive • Taller tops to push without stress This avoids the classic mistake of lighting only for the tops and forgetting the rest of the plant. CO₂ at ~900 ppm is intentionally moderate, not excessive. At this stage, it supports: • Faster carbon assimilation • Better light-use efficiency • No need to overfeed to “match” the CO₂ Everything stays balanced. ⸻ 🌬️ Airflow Strategy (This Is Not Random) • Vortex extraction • Cross-winds with multiple fans • Constant, gentle movement across the canopy The goal here is movement, not wind. Vortex extraction keeps fresh air cycling efficiently, while cross-winds prevent: • Microclimates • Stagnant humidity pockets • Weak stem development Leaves move gently, stems strengthen naturally, and flowers stay dry and comfortable as they form. Fresh air, no stress, no stagnation. ⸻ 💧 Feeding & Nutrition Strategy (Why the Change Now) • EC: 2.4 • pH: 6.5 This week marks a clear nutritional transition, guided by plant signals rather than calendar dates. Why pH 6.0+ from now on? As plants enter flower, nutrient uptake priorities shift: • Less focus on pure vegetative nitrogen pathways • More demand for elements tied to flower formation, enzyme activity, and energy transfer A slightly higher pH improves availability and balance of these elements in soil-based systems. The plant is clearly asking for it — posture, color, and growth rate all confirm this. ⸻ 🌱 Nutrient Change Explained • Removed: Terra Grow • Introduced: Terra Bloom — 5 ml/L Why remove Terra Grow now? Terra Grow is nitrogen-forward, designed to push vegetative mass. At this stage, excess veg-driven nitrogen can: • Delay flower focus • Encourage unnecessary leaf production • Blur the plant’s hormonal transition Why introduce Terra Bloom now? Terra Bloom supports: • Flower site development • Structural energy needs • Balanced nutrition without over-pushing foliage This is not a shock change. It’s a handover, and the plant is responding cleanly. ⸻ 🌿 Plant Structure, Leaf Work & Expression Amnesia Skunk continues to show excellent structure. • Leaf bending is the primary training method • No topping chaos, no forced stress • Just guiding light and space This method has: • Opened the canopy naturally • Preserved apical dominance while improving lateral exposure • Allowed the plant to stay confident and upright A few fan leaves were removed during photography — not as a defoliation event, but because they were funky, expressive, and worth documenting. Those leaves tell a story: • Healthy venation • Strong turgor • No deficiency signals • No toxicity They reflect a plant that is fed, lit, and aired correctly. ⸻ 🔮 What to Expect Next Expect: • Continued flower site stacking • Gradual stretch control through posture, not force • Increasing resin activity as flower identity locks in Do NOT expect: • Aggressive defoliation • Sudden stress techniques • Chasing numbers for the sake of charts This run stays calm. The plant leads, we follow. ⸻ 🙏 Final Words Thank you to: • Newcomers discovering this diary • Old souls following quietly • The curious, the critical, the supportive • Genetics, gear, sponsors • And the community as a whole It’s genuinely a privilege to share this space and this process. Amnesia Skunk is doing her thing — and she’s doing it beautifully. More soon 🌱✨ FOR DISCOUNT CODES AND MORE JUST FOLLOW THE LINK https://website.beacons.ai/dogdoctorofficial 📲 Don’t forget to Subscribe and follow me on Instagram and YouTube @DogDoctorOfficial for exclusive content, real-time updates, and behind-the-scenes magic. We’ve got so much more coming, including transplanting and all the amazing techniques that go along with it. You won’t want to miss it.GrowDiaries Journal: https://growdiaries.com/grower/dogdoctorofficial Instagram: https://www.instagram.com/dogdoctorofficial/ YouTube: https://www.youtube.com/@dogdoctorofficial ⸻ Explore the Gear that Powers My Grow If you’re curious about the tech I’m using, check out these links: 🔆 Lighting & Environmental Control • Future of Grow — Advanced LED lighting technology https://www.futureofgrow.com/ DISCOUNT CODE: DOG20 • Lumiflora — Under-canopy LED lighting https://lumiflorade.com/ • TrollMaster — Environmental controllers and automation gear (past collaboration) ⸻ Genetics • Zamnesia Seeds — Genetics used in this project https://www.zamnesia.com/ ⸻ 🌱 Soil, Substrates, Boosters & Root Support • Plagron — Substrates, bio mixes, and supportive products https://plagron.com/en/ ⸻ 🎒 Storage, Curing & Preservation • Grove Bags — Curing and storage solutions https://grovebags.com/ ⸻ 📸 Photography Equipment & Tools (Not sponsors, but part of my creative toolkit) • Sony A6700 • Sony full-frame macro lens + few more • Stacking photography workflow - learning • iPhone (for behind-the-scenes shots) We’ve got much more coming as we move through the grow cycles. Trust me, you won’t want to miss the next steps, let’s push the boundaries of indoor horticulture together! As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. Let’s celebrate it responsibly and continue to learn and grow together. With true love comes happiness. Always believe in yourself, and always do things expecting nothing and with an open heart. Be a giver, and the universe will give back in ways you could never imagine. 💚 Growers love to all 💚 📸 P.S. – The Eye Behind the Lens All photos in this diary (for now — except for the ones showing the camera, which I took with an iPhone) are taken with a Sony A6700 paired with a Sony full-frame macro lens and a few more. Photography is part of the story — it’s how we share the fine textures, the glow, and the quiet details that words can’t always capture. I’ve also started experimenting with photo stacking — a technique where multiple images, each taken at a slightly different focus point, are layered together to create one perfectly sharp image from front to back. It’s not digital enhancement or AI; it’s pure photography — a way to reveal the plant’s beauty in microscopic depth, from trichome to petal. You’ll even see a few shots of "ghost me" capturing the shots — camera, lens, setup — because every grow deserves not just to be cultivated, but documented like art. FOR DISCOUNT CODES AND MORE JUST FOLLOW THE LINK https://website.beacons.ai/dogdoctorofficial NEW DISCORD - Official Server Invite Link : https://discord.gg/ksjAkA5T74

Hey what’s up fellow growers I made a mistake and deleted my dairy for these clones so I just put em all in one This is week 6-8 since I had these clones All pictures is from beginning to recent I’m growing four different strains Sherbertlato , Peanbutter Breath x Cookies , Wedding Cake , & Gorilla Cookies I have them in a 4x4 diy tent under a 1200w Aglex LED & a 600w FSg tek LED budget light I only water ph at 6.6 with cal-mag since I received them I’ve transplanted twice from solo cups to 1 gallon to 5 gallon grow bags inside of a mixture of fox farm ocean forest and roots organics 707 soil I still have the wedding cake and sherbetlato in 1 gallon grow bags til they grow taller then their going in 5 gallon before flower Today is April 5th I just watered and cut some clones then placed them under an diy scrog net Once the cuttings roots I’m going to flip the Gorilla Cookies and Peanutbutter Breath x Cookies into flower I must say although this is my first grow I think I’m doing an okay job with these clones a lot better than I did with my auto flower grow I learned to watch and time my watering and feeding and I’m still learning a grower I know where I got my clones said I’m catching on fast tho n keeping my environment clean and air good not getting any bugs specially without any expensive equipment So stay tuned Im only getting better specially with the advise and techniques

Hello everyone :-) A lot has happened this week 🤗. It has developed very nicely and its roots have exploded properly 😍. It is also slowly becoming lighter, since it has obviously been slowly consuming its nutrients from the soil :-) That is why it was repotted today, mixing 2 g per liter. soil Green House Powder Feeding Bio Grow between the soil. Then everything was mixed and distributed well, and the plant used. I hope that's the little shortcoming is quickly picked up :-) When watering, 1.5 g of enhancer per liter was added :-) Unfortunately I noticed too late that I didn't take any pictures of the root ball while repotting 🤦‍♂️🏻. I look forward to seeing how it evolves this week. Above all, I am excited to see how she is doing with the Green House Powder Feeding BioGrow , as I have been used to mixing everything for each wash separately 😊. During the course of this week I will also spontaneously decide whether I will give her an LST, topping fimming, etc., since I have to see how I am in the vegi phase, because the Cup has a limited time 😁. I wish you all a lot of fun watching, have a nice week, stay healthy 🙏🏻 and let it grow ☘️👍 . Green House Seeds Company Cup 🏆 Type: Wonder Pie ☝️🏼 Genetics: Wedding Cake x OG Kush 👍😍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Flower Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 220 W 💡💡☝️🏼 Earth: Canna Bio ☝️🏼 Fertilizer: Bio Grow Feeding ( GHSC ) , Enhancer ( GHSC ) , Bio Bloom ( GHSC) ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 6.0

Toda esta fantasía se hace realidad gracias a Royal Queen Seeds y @James por confiar en mí. 🚀💥 Fiel a su linaje genético, la Hyperion F1 ofrece un aroma intenso que está dominado por notas frescas de pino y hierba, junto con un trasfondo terroso y un delicioso toque especiado. Aunque todos nuestros híbridos F1 producen excelentes concentraciones de cannabinoides y terpenos, no hay duda de que la Hyperion destaca entre el resto. Sus cogollos alargados y escarchados producen una resina rica y cargada de cannabinoides (sobre todo THC), y terpenos como mirceno, ocimeno, farneseno, terpinoleno, cariofileno y humuleno. Esto no solo da lugar a un aroma muy fuerte, sino también a un efecto bien equilibrado que combina una relajación física (en gran parte gracias al mirceno y al farneseno) con la euforia, risa y efecto motivador de otros terpenos. Al igual que el dios de la luz del mismo nombre, la Hyperion F1 causa un subidón esclarecedor que se puede disfrutar a cualquier hora del día. 🌻🚀 Consigue aqui tus semillas: https://www.royalqueenseeds.es/semillas-de-marihuana-hibridas-f1/622-hyperion-f1.html 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 7: Por fin se ha acabado este temporal maldito y he visto las preflores, ahora espero que crezca algo mas y se hagan unos buenos cogollos resinosos. Todo va bien hasta ahora 😊

D9 Height is steady 7cm, leafs grow.👍 D11 start with 15min/h Ventilator D12 7.5 cm nice grow

Looking good but growing slow. Not much trichomes or frost but quite a bit of bud mass. I feel like she still has a bit of time left before she's done flowering. But she's fading in the leaves a bit.

They have stretched a lot more than I anticipated for the first week of 12/12. Very happy so far and have about 19 cuts ready to test the strain in coco in my spare two grow chambers. I have numbered all the cuts in relation to which plant they came off so I will be keeping only the best two out of the 5 plants. Very happy with the growth structure so far, I normally top and train or scrog my canopies but want to just let them go to see their natural growth structure. In the next 5-12 days I will swap out the metal halide for my sodium bulb depending on how much they stretch.

Week 11 (Mar 11 – Mar 17) March 11–16 → trichome close-ups, mostly clear/milky. March 20 → end of stretch, buds swelling, first pistils turning orange. ⸻ Week 12 (Mar 18 – Mar 24) Grow left on autopilot during vacation. Plants stable, humidity/temps under control. Buds continue swelling naturally. ⸻ Week 13 (Mar 25 – Mar 31) Returned March 31 → plants very big, buds thickening. Trichomes mostly milky, no amber yet.

9/17 Didn't know this was a new week or I would've taken more pictures. I'm glad I took those two plants. As it dries and I start to trim I could see where it could've turned to rot real easy. It rained enough last night to soak all the girls. The two bottoms I harvest look like the have pm on them. If so I'll wash it or through it in the concentrate bag. Found a few colas a dropped which will go in the concentrate bag. Scoping the toasted toffy and the event horizon and the both look AMAZING! I've scoped the others and I'm extremely impressed. They may be difficult to grow strains but they have high cannabinoid content. The sherb cream pie has really come to life and turned totally purple with beautiful flowers. The girl in the 50 has several soda can sized buds. I hope this weather holds up. I don't like flowers this size getting wet. The sativa leaning hydrid us the only one I may have trouble with. It's only in a 10 gal but it's enormous! If needed I coyld bring it inside at night. The buds look like cat tails. I'm used to growing indica dominant strains. Plant us super healthy though. I'll be intrigued jail for a while and I've gotta make contact with whoever is going to do my extracts. I'll keep this updated. It's a lot of work bur it's worth it. 9/18 WATERED EVERYTHING I GALLON BUT THE BOTTOMS OF THE 2ND EV AND THE TT WHICH EACH GOT A HALF. Since harvest I've noticed some pm spring up on the toasted toffy. Looking at the other event horizon through a scope the trichs are all milky with some amber. I'm just waiting for A LITTLE more amber. And for me to have time and or room. I decided to harvest the tops and majority of one of my event horizon and toasted toffy. Today during an inspection I found a couple grey mold branches and some botrytis on my big GMO on the back. This plant is done. It's by far the furyhest ahead. Septoria effected the yield a little but pistols were retracted and amber was at like 10%. I thought about it and I watched the plant next to it with the pm have a branch I supported just "slough off". Right in my face. I figured if there was a sign tjis was it. I cut that rot off and put the buds from the branch in a bag and froze them then I went around and harvested the limbs on the other plant that were furyhest along. I took about half of it. I could've taken more and maybe I should've but I'm tired. I also noticed a couple spots of grey mold on the plant in the 50. All the leaves were falling off. I finally scoped it and it was right whetr I wanted it to be. Looking at the colors I'm glad I spent so much time the past few days. That one I hung whole. The sherb cream pie has something eating the fresy shoots (probably ear wigs. But the buds are fattening and the trichs aren't quite there. I'm going to let the rest of this stuff go ad long as possible. With the exception of the other event horizon. I finally tried it. It's fucking killer. I could take that plant now. The only reason I'm not is because I have to much work on my husband's as is. I'll do some videos amd pictures but I'm tired as fuck. Got to try event horizon. Very fucking impressed! 9/19 The past 3 days I've been working 5 a.m. to dark. I went back and harvested the bottoms of the toasted toffy and event horizon 1. After injury from harvest they contracted wpm. I used this as a learning experience and put some away in the freezer for concentrates and used a peroxide and water bucket. That's what kills the p.m. anyway. I hung them and they spun in the wind. I blew them lightly with a leaf blower before putting them ok strings I had previously setup with a fan in front of it. I kicked ass today. Toasted toffy got sampled and did NOT disappoint. I had it in a jar though and it was green so I'm not counting this. I do have some dry. I have indoor left too. Like in the video that one GMO looks like it's fucking dying or something. I'd rather cut it and use it for concentrates if it effects my healthy plants. I just checked on that plant in the 50 I hung. It looks amazing under the scope and smells better. Decisions, decisions. I do have a few calls I should make sooner rather than later. We are supposed to be getting rain. 9/20 The past 3 days have been hard. The wife's medical stuff is acting up and I had to tend to harvesting a few. My whole body hurts. I even did my first bud wash yesterday! The ev and tt I took and left some buds on ended up covered in pm. So I decided fuck it and tried bud washing. I also froze some for extracts. Speaking of which I need to male contact with whoever I'm going with this year because I think I've reached the point of diminishing returns on that dieing GMO. When it comes to grey mold and botrytis I don't fuck around. Winds are really high today. Putting the scope to the sherb pie is making me second guess myself too. Oh well. It's not going to rain today. And if needed I can move them in the barn. If I get ahold of Mt processor I'll chop that GMO and bring it right there. The other thing is that I've got tons of weed and a lot of its hanging so I've gotta find someone that will do a batch of live rosin then like a elbow of dry. This is the best part of the year. We'll It's supposed to be. Cutting down good plants us bittersweet. I don't mind chopping that one gmo a little early though because it's close to hitting the point of no return. That little sativa dominant hybrid in the ten is HUGE! The buds are swelling like crazy too. It's got a COUPLE septoria spots but this thing is resilient and easy to move around. This will finish perfectly. So far I'm happy with what I have. I'm GRATEFUL. The two September plants I tried were GREAT. A 90/10 and an 80/20 and they both suprised me and got me exactly whete I wanted to be. I'll keep things updated. I did a video I'll upload. 9/21 Weather is still great and the buds don't even seem wet in the morning. The thing is is that something (rot or ear wigs probably both) have stripped lower interior branches. In some cases stripping them ENTIRELY or chewing the stem right off. It wasnt happening to my favorite GMO or the one in the 30 and the like on in the ten. The Sherb pie I noticed grey mold on 3 different branches. Last time I checked trichs it wasn't ready but I've got to get a handle on this mold/pests or it's going to he taken a little early. We have incliment weather coming Wednesday I think. I'll bring the 10 inside and if I have to I'll bring that perfect GMO in as well. I'm going to scope everything again today. I called a bunch of extractors for prices. I was going to do fresh rosin and just yank and drive but that is looking to be harder. I can get badder made CHEAP from a reputable lab. I think I'll do that. They prefer dry and that way I could through what's left from last year in there. I have this other one GMO that I've had the same issues with. I'm sick of removing bud rot or having to cut interior branches off due to pm. Tried toasted toffy and it was fucking amazing. I'm planning on trimmingvthe ev and if I finish I can bring the other one in. It's done. It's not getting any bigger. Trichs aren't changing. That GMO I am going to scope when I get home and it will be coming down in the next couple days. Otherwise I'll end up with half of what's there. The GMO I took the tops from is finishing up too. If I scope that and it looks decent and I have the time I'll take the remainder. I'm leaning towards doing at least a lb dry for extracts. I've got some frozen. I've got some hanging and most is still in the ground. I sleep on all major decisions. However, I know getting my nice buds soaked when I'm already losing shit to budrot and grey mold isn't the smartest thing. I'll probably take what I can and bring the others inside to keep them safe. I didn't think I'd have this much quantity. I knew quality would be good but this isn't a bad year quantity wise either. I'll keep this updated. 9/22 Busy as hell! Rain coming Tuesday. After a final check of the scope and the flowers and I took the GMO that all the leaves had fallen off of. That plant is going straight to extracts with the one in the thirty. I also "finished" harvesting that GMO that was furthest along. Trichs were getting amber. Been in trim jail. Was going to take the Sherb Pie but I'm not seeing amber yet. I did have to cut off some branches that had rotted. I'll keep an eye on it. It will come down when it's ready. It just sucks losing little bits of it. My favorite GMO is sooooo close to perfect. I should just take it but I'll wait. If we get rain I'll bring that and the sativa looking one in the ten is the barn. Back to work now. Before I forget what strain is what lol. 9/23 Still busy as fuck. I chopped the other event horizon amd hung it whole. It's DONE and it doesn't need to go through the rain storm. I also took the majority of the GMO early pheno. What's left will get plucked off and used for extracts. The big one in the 50 is getting dry. I have finished the event horizon and I'm not "finished" with the toasted toffy but I have it in 5 gal buckets with a food grade lid so u can at least cure correctly. The gmo is still hanging. I'm wondering whether I should wait it out or chop. I'm gonna take care of what I have inside first and hope that shit doesn't eat my plants or that it doesn't rot off. That perfect GMO has one branch with some grey mold. I might cut it off. I'll keep this

Thanks to Creepy_Steeve for the legendary tips, in this diary he guided me to remove a shell that was stuck on a seedling, now it has become one of the biggest plants in the crop 💪🙏 Flowering begins.I did defoliation on the lower tiers on day 4 of flowering ------------------------------------------------ Water: tap water at 300 PPM, I add 0.7G of Hybrid powder per liter to reach 800PPM and I adjust the PH to 5.8. Currently I water my pots with about 1.5L of water every 4 days -Daytime temperature: 27°C -Night temperature: 23°C -Humidity: 45-65% -Lamp: Mars Hydro FC3000. intensity 80% at 40cm from the top leaves -Room: Mars Hydro 100x100x180cm -Extractor: Mars hydro 402 CFM Max. power 2/10 -Substrate : 70% coco, 25% perlite, 5% vermiculite. My instagram : https://www.instagram.com/p/CuMhQ_BsjRP/?utm_source=ig_web_copy_link&igshid=MzRlODBiNWFlZA== Looking for MarsHydro equipment for your crop? 🔥 You can use my promo codes! 🙏😻 3% off with "houstone3" for: TS LED Grow Light, Tent, Ventilation 5% off with "houstone5" for: FC&FC-E&SP LED Grow Lights; Grow Tent Kits https://www.mars-hydro.com/?acc=hou-stone

The plant on the left has definitely developed quicker than the other. Not quite sure why the right plant is curving all sorts of ways. Currently dealing with fungus gnats which could be the reason but I'm glad one plant is showing strong signs. Trying to avoid harsh chemicals that may deplete microbial life so I'm hoping the plants can withstand gnats. I'm also sparsely watering to avoid further life cycles for them. Enjoying watching them grow. So far so good I hope.

She's now starting to get some good bud developemnet. Took super long to even start budding. Started giving her some nutrients. A little too late but she'll make it. Overall, I'm pleased to have gotten her this far!

Was away for 4 days didn’t get as much attention as usual still growing very well doing her own thing

Mar 31st Week 16 Changed nutrients to straight Dense Bud Compactor 1 gram/ litres @ 900-1000 ppm for 2 days CR # 1 showing signs of root wrought I removed the slimy parts of the roots and will watch closely On April 2nd I will add the rest of the nutrients to the existing solution April 2nd Fresh nutrients today, all nutrients added 8 litres of fresh water + 6 litres of the existing Dense Bud solution @ 1100 ppm CR # 1 is dying due to root wrought I removed most of the roots today. I changed all the water today with this one. I’m hoping to get it to harvest, but things don’t look good. I will probably flush this soon to harvest what I have. CR # 2 is doing fine as far as roots. Buds are smaller on this one but may fill out more with the Dense Bud Compactor. April 6th Switched CR # 1 to flush solution Root wrought was sever and unfortunately 90% of the root mass had to be removed Time to save what I have

On day 1 the reservoirs PH is 6.3. The rez is 483 ppm. The girls are looking good and nitrogen toxicity seems to have stopped. On day 2 the reservoirs PH was adjusted from 6.1 to 6.3. The rez is 477 ppm. Trichomes seem to be 10% cloudy so I still have a bit to go i'm thinking 9 weeks should be a good bet! On day 3 the reservoirs PH was adjusted from 6.4 to 6.1. The rez is 500 ppm. On day 4 the reservoirs PH is 6.2. The rez is 503 ppm. I lowered the ppfd so my tallest received 900 ppfd and an average of 543 ppfd. On day 5 the reservoirs PH is 6.2. The rez is 519 ppm. I removed some of the extra fan leaves blocking bud sites. On day 6 I changed out the reservoir with only tap water and adjusted the PH from 6.7 to 6.1 with a ppm of 249. The trichomes are maturing and I plan on harvesting on week 8 day 4 of flower. On day 7 the reservoirs PH was adjusted from 6.5 to 6.0. The rez ppm is 250.

I'm a little late with update, I was very busy. In grow room it is all under control. the buds are filling up. Strech has stoped. Here is 17 days since flowering. Smeel is pretty strong, i just need to set up carbon filter. Next update will be in a fev days. ✌️🤘💚💜

Aug /20 Week 7 of flower and im only began to flush yesterday i expect to havest by sept 1st

Ich muss bei diesem Grow wirklich fast nichts machen, Sie macht ihr Ding auf der Fensterbank alleine. Habe ein paar Thripse auf den Blättern, bleibt leider nicht aus bei Outdoor grow bzw Fensterbank. Gieße mit Plagron Bloom, Green Sensation und ein bisschen Calmag, bislang keine Mangelerscheinungen.