Recommended
Likes
Comments
Share
All the plants show pistils and look hralthy except the one in the middle, probably taking it out if it doesnt get better.
Likes
3
Share
Likes
7
Share
@Meksi2790
Follow
nice and clean down below so the energy can focus on the top maintaining the same temperatures will start lowering next week to start bringing out the purple
Likes
31
Share
The end of week 1 has arrived. We all know how it goes. Just playing the waiting game. At this stage these girls are just working on building their root system. The roots should be hitting the reservoir in the bottom of the buckets soon then they should take off. Got the water pumping and the lights beaming 24 hours a day. Running a low dose of maxigro. Keeping the ph around 6. Will probably be topping them around day 12. Would be amazing if I can get them ready to switch to flower at the end of week 3. But for now I'm just going to check on them 420 times a day hoping they don't die. Might be back next week if they are alive. Happy growing!
Likes
21
Share
This week, looks like good bud growth. These ladies are starting to thicken out, and I'm looking forward to seeing the next couple weeks growth! I hope you enjoy the little videos I'm doing, maybe one day I'll add some commentary 😄 Thanks for taking a look! 🙏
Likes
2
Share
@SamDo
Follow
Semaine 2 – Croissance Mother Gorilla On continue sur une bonne lancée avec cette deuxième semaine de croissance ! La plante est bien vigoureuse, elle a clairement pris du volume depuis la semaine dernière. J’estime qu’elle a quasiment doublé de taille, on est maintenant aux alentours de 15-16 cm. C’est un bon signe, elle se plaît dans son environnement et ça se voit aussi au niveau des racines : elles ont bien évolué en quelques jours, bien blanches et en pleine forme. Côté constantes, on reste sur 18h de lumière par jour. La température oscille entre 22-23°C en journée et descend à 18°C la nuit, donc l’amplitude reste raisonnable. Niveau pH, il a un peu bougé et est monté à 6, mais rien d’inquiétant. Je vais surveiller s’il continue de grimper, et si besoin, je le redescendrai à 5,8. Pour l’humidité, j’ai baissé légèrement à 70 %, et je prévois de continuer dans cette direction la semaine prochaine pour descendre entre 60 et 65 %. L’objectif est de garder un VPD entre 0,4 et 0,8 max, histoire de rester dans une bonne fourchette pour la croissance. Aucune modification sur la plante pour l’instant : je ne l’ai pas encore topée, je préfère lui laisser encore une semaine d’acclimatation avant de commencer le travail de structure. Même chose pour la solution nutritive, je suis toujours sur la même que la semaine dernière. Pour l’instant, pas de signe de carence ou de besoin particulier, donc je continue comme ça. En résumé, tout roule ! La plante est en bonne santé, ses feuilles sont bien larges, et son système racinaire est top. On va continuer sur cette lancée et voir comment elle évolue la semaine prochaine ! 🇺🇸Week 2🇺🇸 – Mother Gorilla Growth We’re still on track with this second week of growth! The plant is looking strong and has clearly bulked up since last week. I’d say it has almost doubled in size, now standing around 15-16 cm. That’s a great sign—it’s thriving in its environment, and you can see it in the roots too. They’ve developed really well over the past few days, nice and white, just the way we want them. As for the conditions, we’re sticking to 18 hours of light per day. Temperature stays between 22-23°C during the day and drops to 18°C at night, which is a good range. The pH has fluctuated a bit, sitting at 6 now, but nothing concerning. I’ll keep an eye on it—if it keeps rising, I’ll adjust it back down to 5.8. Humidity has been slightly lowered to 70%, and I plan to keep decreasing it next week to around 60-65%. My goal is to maintain a VPD between 0.4 and 0.8 max to keep things ideal for growth. No plant training yet—I haven’t topped it, as I want to give it another week to settle in before I start shaping it. Same goes for the nutrient solution—I’m still using the same mix from last week. The plant isn’t showing any deficiencies or issues, so I’m keeping things steady. Overall, everything’s looking great! The plant is healthy, leaves are nice and wide, and the roots are thriving. Let’s keep this momentum going and see how things progress next week! 🤘😎🤘
Likes
66
Share
@DevilsBud
Follow
New week for the Chocobang 🎶🎶Look at chocolate salted buds stick in your bong and smoke it 🎶🎶 I think the Chocobang needs couple days more then the rest but it's going great there at a size that adding extra nutrients is waste and only making flushing take longer so starting to lower all nutrients and preparing for last week exited times Happy growings Growmies 🤜🏻 🤛🏻 visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter
Likes
12
Share
Eccoci qui... Tutto va per il meglio, questa settimana si inizia a vedere la resina e ora si inizieranno a formare le cime, per questo aggiungo Sugar Shot di @xpertnutrients vedremo l'evoluzione settimana prossima. Colore meraviglioso, e odore molto pungente, sono già innamorato di lei. Spero che ora gonfi parecchio e che soddisfi le mie aspettative anche come resa. Grazie a tutti per il supporto🔥🌲❤️
Likes
10
Share
Hi guys, what's up? Welcome back to my diaries. My experience with this pheno has been just amazing and I wish I had a ton of these gems by now!Really very resinous, tight and compact buds .... With spectacular colors and aromas that ... mmmmmm already make you dizzy I'm sure we'll re-propose this delicious plant on a large scale!
Likes
107
Share
Thanks again to RQS for providing the genetics for another diary! It's been another fun run. Thanks to all that follow, like and comment. I appreciate every one of you 👊✌️🤙 Once she was down, her fan leaves were cut off and each branch was hung in the drying box and left to dry for 8 days. It was left in a cool dark place to slow drying time. Once the outer leaves were dry her buds were given a close trim and jarred for curing. I put a 62% boveda pack inside to ensure the humidity is stable during curing, although it's not crucial. The jar is burped once a day for a few days and then left approx a week inbetween the next couple of openings. After 3 weeks or so, you don't have to worry about burping if you wish to store for a while, or you can tuck right in like I do! Because I have 4 seperate quarters for other plants/strains in one tent, under one light, I've had to calculate these by dividing the conditions by 4 (4 sections in total sharing same conditions). This is the fairest and only way to work it out on average as a full tent. If you multiply by 4, it gives you the average amount for a full tent worth. Happy growing! 🦊
Likes
25
Share
my dry and cure style is this: 4 days of hanging upside down to get water activity lower to around 0.6 in 50% humidity and 26 C temp (i know its a little high but we are in a hot summer right now and i cant get it lower even with air conditioner) and then after 4 days of drying i remove leaves and stalks, trim buds and move them to jar for the rest of their life :D . and in the first 4 days of curing i open the jar door and let hem get some fresh air in the jar for about 5 minutes and close the jar door again, after 4 days of curing like that buds are smokable but they will get better as they getting cured about 1 month. buds are one of the hardest as fucking rocks type of buds! very dense , compact , sticky , smelly , amazing at every aspect growing stage was 60 days and flowering stage was 70 days total (harvested tops at day 63th) the total weight of dry buds was : top buds 174 G + lower buds 55 G = 229 G my overview of strain with details: the seeds: unfortunately i only got 1 seed cracked out of 5 so i will not know how much this genetic can get different but at least i got the chance to grow once of this wonderful strain the plant : in every stage you can ensure that you are dealing with a high level plant , she will get big so you have to control her height LST and SCROG highly recommended , will grow very well with tick stalks and big fan leaves , has good resistance for stress and will respond very well to stress trainings , she really has gorilla power in herself , fresh buds on plant : buds are very compact and dense even from start , fresh blossoms smells like pineapple and mango , 2 different shades of sweet smells like you hold 2 junks of pineapple and mango in your hand and you smell them together, she is a trichome and resin factory , very very sticky , very oily , strong smell dried buds: very compact and dense , hard as rocks , has dark colors with purple hues inside it , it smells sweet smoke : very smooth and sweet like lollipop , pineapple , mango like , after 2 minutes it'll kick in and you'll get higher and higher with every breath , has a strange and especial high mind high mostly
Likes
3
Share
@123Grow
Follow
1. LABS - I suggest using distilled water for the entire process ( no chlorine or chloramine). I also suggest the type of rice product shown ( 1/2 cup), it has red, brown, white, and black rice blended together. You get the benefits of each type. 2. Take the rice that was used in making the rice rinse for labs and boil it in 3 cups of water for 30 mins. Strain the rice out. Add 1 TBSP molasses per 300 mls. Use 300 mls of the above mixture during your watering cycles. It contains starches, b vitamins, aminos, trace minerals, calcium, magnesium, iron, phosphorus, potassium, and some nitrogen. The ppm’s are not higher than 200 ( if using distilled water). This is ONLY used if your plants are healthy. If your plants are sick…this will NOT help them. It will make stuff worse!!! The Hulk-Berry got a new home. 1 tsp 7-3-1, 1/2 tsp 0-12-0, 1/2 tsp Langbeinite, 1 TBSP 2-2-2, 3 TBSP 4-3-3, worm castings, recharge (1/32 tsp) into the soil ( Mother Earth). The 3 RuntZ are coming back from slow growth at the outset. I added LABS, Lentil SST, Photosynthesis Plus to the media. I did a foliar spray with recharge. 24-36 hours later the leaves exploded with growth and height. I added ZERO nutrients!!! I only used natural inputs and bacteria to get the root zone back in order. 11-3. Things are all in check! The LABS, SST’s and Rice wash have gotten the 3 RuntZ back on track. The Hulkberry is in full swing. I think I can get to 3 feet by flower time with the Hulkberry 11-5 All is well today!!! Everyone is very happy after the cal-mag, Photosynthesis Plus, kelp bath
Likes
8
Share
Plant two is doing a little better color wise. Something is going on with the leaves of plant one mostly. Maybe it is because i was using overflow water straight from the air conditioning unit instead of the tap? I'm having to pull a lot of dead leaves off
Likes
5
Share
@RoyColt
Follow
Always R.O Water Watering the plant 3 times for per week 1st Watering with nutriens. 2st Watering with nutriens. 3st Watering with only R.O water & CalMag Extra Boosters: Terra Aquatica Pro Bloom With Sprey 3 times per a week
Likes
12
Share
@LSchnabel
Follow
One more week to go! This has defiantly been a fun grow for sure and I think if I run a single plant like this again I will have a 10-15g pot. I also will fill my scrog net and give it a week of two and flip to grow a taller canopy. This week the trichomes are really starting to turn. Bud is VERY dense and packed full of crystals. Smell is crazy strong. I’m picking up citrus and fruit loops without a doubt so I wonder how it’s going to smell after dry/cure. Buds are pretty nice sized as you can see from the comparison of the lighter. The thing is I’ll have over 150 of them tops I believe… haha Nothing has changed this week. I have started to remove any old fan leaf that has been spent. My plan is to slowly remove as many as I can that are pretty much spent by the time I harvest so I do not have to spend much time on that when I cut her down. I have started only water feeding with about 3 gallons of water each feed to leach out any build up. Will do this daily. Hopefully next weeks update will be a lot of harvest shots.
Likes
66
Share
Still deciding , did a bunch clones and now i will see with are the strongest to keep So the first ones find them selfs in a new pot 😆 for now we have 1 CS phenotype #1 with i decided to top , 2 CS phenotype #3 the hulkeberry one , 1 CS phenotype #2 the fruity smell one , 1 Kushi ( wthis is not on the list but still there😆) and 2 TP phenotype #2 I gave them 0,5L water with a TDS of 380 just to help with. The transplant. Started feedings 💚 All i grow is medicine for myself, nothing to sell so don’t even ask 🙏😅💚 All i grow with love and I’m in a constant phenohunting for that perfect strains, stay tuned, stay happy and stay safe 💚 💚Big love tou you all 💚 💚growers love 💚 💚
Likes
47
Share
@pheverone
Follow
Gave them their 3rd and final heavy defoliation this week. Had lots of useless side branching that will just shadow out the good stuff and cause them to not ripen properly, a lot of this growth was due to the unintended extra 10 days they had in VEG before I noticed the timer wasn't doing what I asked it to do, just one of those things. Always a surprise in the grow room no matter how much you try to prepare and problem solve. I also had an air line manifold blow out this week which was very strange to see. Caught it early so girls didn't go without air for to long and I have 2 air pumps running so 1 going down is only a minor issue but still a great example of the random mishaps that occur when growing. If its one thing that experience has taught me its that less is more when it comes to how many colas you try to fit into a space. Do to many and you'll just end up with a load of mids, battling humidity problems and stress of keeping tons of half ripe colas falling all over onto each other come week 6 or 7. Everything is going great so far, no issues, although I have noticed some of the white hairs on the budlets have slight ginger tops (only a very small few) I have read in the past that this can be a sign of stress and potentially they might flip the hermie but I've done nothing to stress them so I am hoping this is just a abnormality from growing under LED. Boosted the nutrients up to 1000PPM now to let them feed heavy and pump those buds up. Hope you enjoy watching my grow and thank you all for the lovely comments and feedback, it is much appreciated ✌️
Processing
Likes
29
Share
@c3llular
Follow
I dumped the water and added new today with nutrients. Two plants are looking really healthy. I'll focus on these now and let the others slowly grow on the side. The one I transplanted late is dead. Will update more as it develops. UPDATE: Largest plant is drooping a lot. I'm assuming the auto-waterer over-watered again. Avoid this flower pot. I emptied the water and am letting it dry out a bit before watering again. UPDATE: The auto-waterer soaked the large plant. I've poked holes in the medium and lowered the light to just above the plants to hopefully help dry it out quickly. Also have a fan on it. UPDATE: The plant dried out enough that it's looking healthy again. Yay!
Likes
24
Share
@Canadian
Follow
The plant seems to grow very slowly so lots of vegging time will be very beneficial for this one overall health smell and looks are doing fine and the plan seem to enter flowering stage and it's starting to create the beginnings of the buds. Day 44 the plant is very bushy and today I have to trim some more fan leafs a bit more mostly in the centre area of the plant so that I can encourage maximum light penetration. Thank you for reading I will continue to update have a happy grow