Doing good week 4

Day 86 PH 5.8 EC 0.2 DLI /11h/ PPFD/ Water 20c Day 88 Wed PH 5.8 EC 0.2 DLI /11h/ PPFD/ Water 19c Day 89 Thu PH 5.4/6.0 EC 0.2/0.2 DLI /11h/ PPFD/ Water 19c Day 90 Fri PH 6.6/6.0 EC 0.3 DLI /11h/ PPFD/ Water 19c Day 91 Sat PH 5.6 EC 0.2 DLI /11h/ PPFD/ Water 19c Day 92 Sun PH 5.8 EC 0.2 DLI /11h/ PPFD/ Water 19c

Coming close to the end now folks they were checked on 62 days old with microscope and a good few trichomes still looking very clear so will give them a few more days and check again and most importantly I will keep yea's all updated happy growing folks 😁

Buenas! Esta semana pasaron cosas, agregamos red scrog para luego inducir la flora. Ya pasamos 12/12 pero me gusta darle una semanita de pre-flora. Seguimos con IPW de athena de forma foliar para prevenir todo tipo de plagas y enfermedades, una vez x semana. Una de las que viene mas grande le hice un supercropping para bajar el canopy. Vienen como locasss. Ultimo riego con Sensi Grow y ahora pasamos a sensi Bloom. Saludos

I had a scare with this one in week 3 it was looking a little yellow and I had to dial in my watering and feeding but it bounced back.💪 this was the second highest producer of the 4 strains that finished. Tangie-matic flushed well as you can see in the week 13 video the fan leaf's yellowed up also from heat stress as I had a leak in my filter and the fan. It was blowing hot air in the tent. 90 degrees for one day then it was fixed, lucky for me it was at the end of the cycle. I will grow these again maybe in a sog or try to scrog them better next time. good smelling strain Cheers to Green buzz and 420 Fast Buds.

Ciao growers ... I didn't think I would have come to continue this diary, because, as you can see in the picture, there were some problems that made me change my ideas ... After spraying the two plants (plus one in the diary "Cookies On The Kush" ) with a 3: 1 mix of neem oil + potassium soap, causes thrips ... these parasites have been defeated yes, but at a high price ... they must have reacted badly to the compound, triggering a phytotoxic reaction ... .I'm not a scientist or a biologist or anything like that, but reading online I think this was the cause ... because the leaves would seem to be eaten by caterpillars or the like, but this is not the case ... On girls I had also just done a Topping on one and a FIM on the other, before finding myself forced to spray them 😌...so, a lot of stress.... Well in the end, after they looked like they were dying, they recovered in growth, and now I have done a transplant in a geotextile pot from 20 l, consisting of about 50% Lightmix-3 0% cocomix-10% humus-10% perlite.. As soon as the transplant was done I gave them about 4 ml of root juice in 4l of h2o, in total divided by the two of them ... It will be a diary "random" / artistic/i don't know 😅".... I want to" play "a little bit about the malformation that they have suffered ... now I'm doing some tying so a bit for fun ... we'll see what comes out of it ... for sure they will be very particular .. ... to the next update ... thanks that you read, and I hope you like it 😉... Bye Guy's 😄✌️

Day 8: All of thesenladies are nice and settled now. They all have 3rd nodes visible and are close to letting the 4th nodes out too. besides the damage from germination and seed husk , they are looking OK so far. I am attempting to get the rootbball wide by watering more towards the pots edges. hopefully this will make them spread out above the soil similarly. A quiet and steady week Growmies. They will bendirectly under light in a few days time so should have grown a good amount for the next update. Be safe

This AK is growing so fast she is in early flower and just starting to strech loving the bloom feed will help with the strech

*Increased ppm from 1050 to 1100. *seems like this might be a 9 week strain or maybe 10. *not a lot of resin production, but flower stacking is long on this one.

Put some extra puppy pics of duke there at the end i found. Glad I took like 20 pics a day of him since we got him in February 2020.. Couple cool videos of Dukie.. one of him jumping as a puppy in slow mo. One playing with a ball

Day 44 today. This lady is one leafy girl !!!. trimming is going to be a nightmare . Her bud growth is still ongoing and with 2 weeks to go she will hopefully swell now !. She doesnt seem to like stronger feeds as other strains do and it was the same with her mum too. her buds are fairly solid and smell sweetly fruity too.

This is the start of my second grow and also second Northern Light Auto from RQS, the goal is to hit #1 in g/plant for that Strain. I didn't take as many notes as in the last grow but there are timelapses, some photos and metrics from probes. Started with 3 Seeds and then picked the 2 strongest. The System is a NFT System but due to the size of the tube and root growths the solution with submerge the roots ~70% later on. To combat that I use 3 small 1.5w air pumps, these are super silent, if one dies I got 2 more running and to be honest air pumps used in DWC systems are often oversized and rely on Broscience. In my Salad/Herb NFT Systems I don't use any air pumps and the plants are just fine and grow great. This time I added sprinklers to humidify the air inside the tube, slightly moisturize the Rockwool and speed up root growths. Spoiler: Was a great success :) The ratios for the fertilizers are not accurate in the following weeks, I have a 120l Reservoir that is filled 90-110l I top it up once or twice a week to sustain PH and EC, if you want to copy it just go by the EC and use the B (Calcinit) and A (Kristalon Blue/Orange) 50/50. I mix the solution myself with dry salts that I bought in bulk 25kg bags. 4l Water(distilled/RO preferably, tap water is OK) + 1kg salts mixes just fine, keep the solution dark and cool and it will stay stable for months. Dry salts don't expire if kept cool and dry so only mix what you need and keep the rest stored as dry salts. 40ml A + 40ml B is about 2EC and 6PH with my tap water, very similar to Canna, Plagron etc. isn't it? just with the twist that I pay ~20% of the known brands. P2O5, K2O, MgO etc. are always the same as long as they are produced by a good manufacturer, Yara is a world leader in fertilizer production just not to be found in you general hydroponics or hardware store. Any other known manufacturer is fine as well, pick the cheapest. Check Hoocho on Youtube to see a guide on how to mix your own solutions, it ain't that difficult trust me. From week 5 onwards I also use Oxygen granulate (KMPS, CAS-70693-62-8, 2KHSO₅ * KHSO₄ * K₂SO₄) if you want to use this check pool supply stores and buy the cheapest. Keep this one dry, cool and dark. I used a old pill bottle to keep some ready to go because it came in a 1kg container and I only need 2-4g per serving + the bottle has a silica pack in the cap. From week 6 onwards I used Haifa Grow Clean for Details check week 6, I use this one as dry salts and add it directly to the tank, it does not interact in a bad way with the solution. For meassurements I use a generic 8in1 Meter "PH-W218" branded by many companies, as usual, check stores and buy the cheapest. (Check week 1 for an image of it) I got mine from Aliexpress for ~70€ it uses the Tuya app so you can always check your metrics and export them aswell. The PH and EC probe are accurate and are giving me stable results for almost 1 year now, I re calibrate the PH probe once in a while and it is tops 0.15 off after a month, always double check your results with PH drops/paper. Bluelab is... A LOT more expensive for less value. For the timelapses I use 2 Tappo C210 2k Cameras, these have the ability to make the stream available trough RTSP so that you can access it trough a link in a browser and that way I snap a Screenshot with a raspberry pi :) after that I just render it with blender to a timelapse. Sadly they seem to have trouble with the bright lights and I get image trouble over the course of the day, if you have a recommendation hit me up :) The script I use to take the Images: #!/bin/bash ########################################################################################################################################## ##### A script to save images from a rtsp capeable IP cam, Tapo C210 (2k image quality) for example in my case. ##### Images are saved in a directory named "2024_01_01" for example, it uses the "date" command within the system it is running on. ##### You can then render the images to a timelapse, I use blender for that. ########################################################################################################################################## RTSP_URL_LEFT="rtsp://:@:/stream1" #sets the variable for cam LEFT access RTSP_URL_RIGHT="rtsp://:@:/stream1" #sets the variable for cam RIGHT access while true; do TIMESTAMP=$(date +"%Y_%m_%d_%H_%M_%S") #sets the timestamp variable DIRECTORYLEFT=/$(date +"%Y_%m_%d") #sets the directory variable with current day for LEFT DIRECTORYRIGHT=/$(date +"%Y_%m_%d") #sets the directory variable with current day for RIGHT mkdir -p "${DIRECTORYLEFT}" #makes a directory for each day if it doesn't exist for LEFT mkdir -p "${DIRECTORYRIGHT}" #makes a directory for each day if it doesn't exist for RIGHT ffmpeg -y -i "${RTSP_URL_LEFT}" -frames:v 1 -vf "format=yuvj420p" "${DIRECTORYLEFT}/${TIMESTAMP}.jpg" #captures a frame from the RTSP stream and save it as a JPEG image for LEFT ffmpeg -y -i "${RTSP_URL_RIGHT}" -frames:v 1 -vf "format=yuvj420p" "${DIRECTORYRIGHT}/${TIMESTAMP}.jpg" #captures a frame from the RTSP stream and save it as a JPEG image for RIGHT ################################################################################################################################ ##### Waits for 180 seconds, change that depending on how precise you want the timelapse to be, less waiting = more images ################################################################################################################################ sleep 180 done Hope you like my diary, leave a comment and a like if you like it :)

6cm decstetch mais là fini je pense! Température 14-28 degrés plante fine et élancé

Well, another week has passed and they are growing very well, now it's a matter of two to three weeks for me to change them to flora, this week I did a little defoliation on the plants and watered them again with top crop top veg fertilizer and I also did some bindings known as low stress training. =D

Soooo week 10 :) These girls are looking reeeeaaal nice SS1 (on the left) is <25 days from harvest and SS2 has still a while to go id say 😄 But all in all things are looking super good buds are looking super nice and frooosty with SS1 starting to shift its energy into budding whereas SS2 is still throwing out some wild pistols :) The smell is super strong which I’m happy about, some staaaanky skunkalicious bud🤤 I have stopped giving SS1 nutes, giving her only water after her flush in week 9and she’s doing awesome! SS2 I’m still giving biobizz grow and bloom 0.5ml/l ea. And she is also loving her environment Got some mushies growing in the one pot though 😄 pulled them out just to be safe still have to do some research :) might have something to say about the enviroment at the surface of the soil. ??

Apple Fritter is doing well. I did some root pruning early in week. I slightly increased nutrition. Will be a few weeks till I change the lighting. She is growing in a New Level Hydro bucket, under the Spider Farmer SE5000 light at 60 percent. Thank you New Level Hydro, Spider Farmer, and Amsterdam Marijuana Seeds. 💪🌱🤜🤛🌱💪 Http://amsterdammarijuanaseeds.com Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g SE5000 https://amzn.to/3qFpAML Spider Farmer Official Website Links: US&Worldwide: https://www.spider-farmer.com UK: https://spiderfarmer.co.uk CA: https://spiderfarmer.ca EU: https://spiderfarmer.eu AU: https://spiderfarmer.com.au Coupon Code: saveurcash Www.newlevelhydro.com Www.hygrozyme.com

Only adding water at a Ph of between 5.5 and 7…still No extra nutrients…switched placement of the plants because the Big Bang was starting to cone and figured the mist from the humidifier was giving too much extra moisture (Not sure how much sense that makes but it healed after the move so I guess🤷‍♂️🏾) Other than that everything was fine.

The flush is almost over and these are almost done. Few more days and they’ll be gettin chopped. Paying close attention the trichome head colors and ratios. Everything looks and smells fantastic. Fastbuds most definitely is a leader in the auto genetic world. More than pleased every time.

Day 64: It seems to go well. I am still keeping an eye on the "hanging" leaves. I think they tend to hang a little more when light on, and less with light off but its hard to say if it is normal. It might be as @GrowingGrannie mentioned, they might be under watered, as there is not much run-off at the last couple of watering's, maybe 1l each time and I will give them a 30% run-off next time to be sure UPDATE: I have noticed some more brown spots on the right plant caused by Calcium Deficiency. I think I should up the PH a bit more, going for 6.5 this time. I will also increase my CalMag supplement by 50%, and do 30% run-off today Day 66: Thank you all for the kind answers 🙏 You all have different opinions, and it is hard to pinpoint the exact problem. I am almost certain that I got some heat/light stress as mentioned by @GrowingGrannie and @Chow_13. I have therefore raised the lamp and are keeping the dimmer very low, using about 140W in total. I am still investigating if there might be other problems to it. @m0use, thank you for your answer. I do not think they are thirsty, at least not any more, as I am already on the subject for the last couple of days. About PH, It was difficult to get a good picture of the PH solution, but it was light-green to green (6.5-7.0) on the picture (And that was run-off PH) and what I put in was adjusted slowly from yellow to light-green aka 6.0-6.5 (I wrote 6.25 but it was auto adjusted) @gottagrowsometime, thank you for the answer. I do not think it is a nitrogen toxicity. My leaves aren't that dark green, although they are a bit to the dark side but not like what I see on other pictures with that problem. I also think the curling is caused by light/heat stress as I just got a new lamp and are experimenting with it. But I will keep your suggestion in the back of my head! @Chow_13, thank you very much for your answer. I think you are spot on, however I am not sure it is the only problem... It might be as you say, nutrients are not absorbed correctly due to the light-stress, but I will not put all my money on that @Nugsery and @GrowingGrannie, a big thank you for your answers. The deficiencies might not be the same, but the cure is very similar. I cannot make up who is right, but I do have a plan. I will follow your recommendation @GrowingGrannie and @Nugsery, and do a flush, but with a ph 5.8 as both nutrients should be able to be absorbed in that level. I will then give her a light nutrient mix and adding PK, also 5.8 ph. This is almost the same solution for both deficiencies. I will then slowly get the ph back to 6.2 @ernesttwwg, thank you for your answer. I have known for some time I have some Interveinal chlorosis, but I do not know what is causing it. There is multiple deficiencies giving those symptoms. The tacoing of leaves, and leaf tips curling down I think is caused by the light, and I have therefor raised the light. I will keep investigating the symptoms you mention OBS: I will not edit my nutrient schema as this is only temporarily, next watering will be as described UPDATE: After flushing with 15L~ ph 5.8~ and a small feed with 5.8~ ph I still get about 6.5~ ph in my run-off water. I am going to do another flush tomorrow to see I can bring it down to around 6.0~ ph Day 67: I think I see small improvements on the leaves. The new heat/light level seem to have done something. I did that second flush and are still getting about 6.5 ph in run-off.... I think I will let her dry for now, monitoring what happens, and do another flush in a couple of days