This is the first run. Much like a try out. Like or comment.. Thank you....

👋Hello, my friend!👋 If You reading this, sign up to my profile, I will be pleased! I download new photos and comments updates every day! It will be nice to walk true this grow of my two Fast Buds 'Banana Purple Punch' auto flowers together! I asking a lot of grow questions and take part in a life of this grow community. New week starts! 🌞28.11.2022 Today I came home and saw my smaller one showing four stigmas in the upper knot. I was afraid of she already starts flowering, but mates from 'Grow questions' made me kalm, answering that she's just showing her gender. It's too early for flowering and thet's how all autos do. Thank You, my friends, You've saved my nerves (as usual). I have watered my girls with full pack of GHE nutrients, including 'GHE Diamond nectar' and 'GHE Mineral magic'. Solution ph: 6.0 Drenage ph: I forgot to drain vater from pot's bottom and after four hours it was gone. So I'll measure it next time. I've done some more LST and sprayed them with 'GHE SeaWeed'. 🌞29.11.2022 Today I asked one more grow question: 'Why all new brunches on my autu flowers has triple fingerd leaves?' Mates told me it's a fault of my substrate Ph and I can do some flushing to fix that. I took one on my girls (#1) and made this procedure deeping a whole pot in a bucket with 10 liters of ph5.9 water. Maybe it's some kind ob a black magic, but it did NOTHING. Inflow: ph5.9 Outflow: ph6.7 Substrate ph after 3 procedures: 6.9 I gave up. I'll not doing this to #2 and let them grow in that cursed substrate till the every end. I made small defoliation after all of this to bouth of my girls. Lowest leaves (first floor) was cut with a brunches growing from it. Also I cuted one fingered leaves of a first week. Results are on downloaded photos. 🌞30.11.2022 Photos downloaded. Mb its my mind tricks itself but I noticed #1 starts growing faster after flushing. It was smaller than #2 and now it's almost the same size and even looks thicker. Tomorrow we'll see it more closely and I'll flush #2 if it's true. I watered #2 with full pack of GHE and sprayed them bough with 'GHE SeeWeed'. Also my BPPa#2 showed her gender today (stigmas on a upper knot). Yep, we have a girl here! 🌞01.12.2022 It's a 'rest day' today. Nothing to wright. (Photos downloaded) 🌞02.12.2022 I made some LST and sprayed my flowers with 'GHE SeaWeed' solution. Substrate ph rised by ph0.1 and now it ph7. It's critical already, especially when my BPPa#1 starts to show stigmas everywhere - almost in every knot. I think pre-flowering starts soon. She looks soft and wobbly, I think there is a deficit of some elements. But my substrate still wet, and I can't do anything. Tomorrow I'll make them both to bath in ph5.5 nutrients solution - and it's only thing I can imagine to do now. Relying on the best, waiting for tomorrow. 🌞03.12.2022 Today I watered both of my plants with 'GHE' nutrients (TriPart + Fulvic acid + Roots stimulator + Selicates) and sprayed 'GHE SeaWeed' on the leaves. Also, I think I finally resolved my cuestion: 'Why ph of substrate don't want to go down?'. I take my water from kitchen crane, it has ~ppm110 and ~ph7.5. But clorine in this regular water slowly makes the reaction with asid I use to low it's ph. And slowly but surely ph of solution rises. I noticed this by making ph5.8 water and waighting 24hrs - ph of solution became 6.7 the next day. My previous grow I used distilled water only and thet's why I didn't know about this problem. It's a pity I made this guess so late. But it's better late then never. From now I will make ~ph5.2 water immediately after watering and it will react till next procedure (2 days). It's ph should rize above 0.9-1.0 by this time and become near ph6.0. I already prepared water for the next feeding - clear, without any nutrients (by now) and ph5.25 on it's start. Today my solution measurements looks like this: - Substrate ph before watering: ~7; - Solution ph: 5.8; - Solution ppm: 680; - Solution EC: 1.1; ... - Substrate ph after watering: ~6.9; - Drenage ph: 6.7; - Drenage ppm: 710; - Drenage EC: 1.03. 🌞04.12.2022 The 'rest day'. My experinent with water ph was sucssessful. Now I know how to treat usual water to feed my flowers correctly. My next grow will be nearly perfect. And also, it's my first (and last) grow using autoflowers seeds. I don't like a grow process ether a future results. Regular flowers are what I can grow the best. So I'll stay on a 'photo' side of a force (after this auto grow ends). Week ends.

So far so good. Another week has passed and everything looks nice. At the beginning of this week i transplanted the blue cheese and special queen in bigger pots and they dont look so small in comparison to the others. In generell all plants recovered good from the topping and in this week i think i will start with some LST and removing some of the lower leaves. I also raised the lighting higher, because i wanted to see if they stretch themselves a little bit, because they didnt grew so much in height but only developed more leaves, but i think i will lower it again and also increase intensity. Also i added up the fertilizer since i had some yellow colering of the leaves at the bottom, and so far they show no signs of overfeeding. Since it wasn't raining like in the last 2 weeks i took them outside to make some pictures with natural light. So lets go into the next week :)

Had another major defoliation this week to uncover more flowering sites and to help lower the humidity, given a top dress of bat guano too and upped some of the nutrients. Still have more shades of green in there than I would like, as said before all clones from the same mother.. all photos taken day 25 of flower

05/08: seconde semaine de flo. Le premier filet se rempli tranquillement. Et un second est prêt pour aider à supporter le futur poids des buds 😀

June 7 - We ordered some new lights last week, they are 240w kingbrite samsung lm310h with uv/ir, 3000k, and meanwell drivers. We setup the new room and moved the girls into there. After a bit of LST and a watering (with nutrients) at roughly 7ph, they were ready to go under the 2 new lights and the same SF-1000 we have been using in this grow. The new room is a 12 ft enclosed trailer. I moved everything from the small tent into this. I put clear poly on the walls, floor and ceiling. I put poly on the shelf I am going to be keeping in there as well. I bought 50ft of 6mm mylar and lined the floors, roof and sides with it. I plan to get some reflective tape to seal everything and to cover the wood. I did not get much of a chance to watch temp's today as they it was later in the evening after all was said and done. The inline fan blowing in air from outside. June 8 - 9 AM i checked the plants, they were at 25.2 and 50% RH. Late through the day I had checked and we had gotten up to around 32 degrees. So I moved the inline fan to the closer vent, hooked up to that, and had the air blowing out of the trailer with the inline fan sucking it from above the lights. I then added oscillating fan and had it blowing air on the left side of the room so it would somewhat circulate once I closed the doors. I then checked at about 9pm and we were at 22 degrees. Definitely noticed a decent amount of growth already. I have the lights on a 22/2 cycle as I was worried about the heat at night time. June 9 - Some great growth from the girls, still having problems controlling the temps in the afternoon. I decided to prop the door open a bit to have a constant breeze throughout the day while I am at work. Decided to do some more LST and also a bit of defoliation. I took about 25% of the leaf's that were blocking the new growth as it was getting a bit bunched up. I was then told the leaf's are almost solar panels for them. So from now on I will be trying to just do some tucking unless needed. The leaf's I removed were most of the damaged leaf's, I am not to sure if that makes much of a difference. I gave them a watering with only water as there is a potential I am getting a bit of a nutrient buildup along with the PH problem. Or potentially the reason for the ph problem is nutrient buildup. After watering with A PH of 7 I got some run off and tested it. The smaller plant gave me a PH of about 5.5 where the bigger one is around 5.0. June 10 - Plants are looking happy and showing tons of growth. Seems to be trying to stretch outwards. Not a ton of sign of PH issues showing so potentially getting it under control. Still a bit of damage to previous leaf's but it is what it is! The last few days I have been leaving the door open a bit in order to keep the temps down. I decided to test something and turn the lights off (automatically) at 11AM and back on at 5PM so light schedule has now changed to 18/6 and it seems I may have figured out the issue. We haven't had lots of sun the last couple days so it hasn't been to hard and I have yet to know if it truly fixed the heat issue for now. (I will be looking into a ac unit as well since it typically gets to around 30-35 around here. June 11 - Pulled some of the branches back down and added a few more LST spots. Seems we have a good amount of growth from the smaller plant out of the 2 topped spots. Unfortunately it looks like I fucked up on the bigger plant and only one of the nodes seems to have new growth. I will continue to monitor that but I think I cut the node to low and also to soon. Other then that, the girls are doing great. They seem to be absolutely loving these new lights. I gave them some nutrient water today as well. roughly 3L each. They seem to be A hell of A lot more thirsty under these new lights. June 12 - The girls are doing great , they are still just doing growing away. Lots of progress everyday. I am going to be getting a go-pro so I can set-up a time-lapse for the rest of this grow. I received my new inline fan, I got A ac infinity CLOUDLINE T4 with the temperature humidity controller. I am going to be having one fan pushing fresh air in and one fan pulling out the hot air. I will be doing that tomorrow since I have to work today. June 13 - I ordered another 50ft of mylar and that showed up today. I have decided to remove the shelf and add another 3+ feet to the grow space. So today I installed more poly, mylar, the ac infinity fan. I have it set-up to pump in air if it gets to warm. I am thinking of switching it to the output that way if it gets to hot or to humid I can have that air pulled out of the trailer. Right now my other inline fan is the outtake and I just have it set on full. Overall I think everything is set-up a bit better and more accessible. I will be putting my 2x2 tent in there at the left of the doors so I can have a veg room when these 2 are in flower. I plan to have 4 in veg and 4 in flower for the next grow. Still waiting on JOTI seeds, ordered 3 weeks ago and still have not been shipped. I will be getting those going the moment they arrive. The girls seem to be happy still, did a bit more LST to try to keep everything even, mainly I'm just pulling down on the spots I already have tie wire on.

This beautiful girl turned out to be a real strong queen who withstood very strong stresses, she is very persuasive for ScrOG, in 2-3 days when she comes out of the stresses I will switch the light cycle to 12/12.💚💚💚

Thank you soo much Humboltd seeds. I love your qualitty. Another my favorite indica strain. 🍀 i love this strain ❤️

💩Holy Crap We Are Back At It And Loving It💩 Growmies we are at DAY 49 and she's just killing💀it👌 The Gorilla Punch Is Amazing 👏 👉We are in full flowering mode for the👈 OG 👍 GP 👍 the AF was the hold out but shes finally went into the Preflower Stretch 👈 So Shit , I gave them just a tad to much nutes at the start feeding 👈 But I have since fixed it So I'm still doing some low stress training 🙃 and some defolation 😳 Lights being readjusted and chart updated .........👍rain water to be used entire growth👈 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈

hoy lunes actulizo solo he regado ayer con bloom de atami. voy a estar regando solo con agua nada mas durante unos dias hasta q vuelva actualizar, como vemos ya esta comenzando a sacar resina poco a poco y ese engorde ya va dando sus frutos.

Hello everyone week 8 of flower has passed for this Mint Jelly auto ❄️ She’s ready ! For the feeding schedule i stopped feeding Power Roots and Pure Zym and started feeding Green Sensation 0,5/l Mars hydro FC-E6500 75% have a great day and wish you all happy growing 😎

So I finally have time to finish this review. The buds cured now for over a month and I consumed them a lot because I simply don't want to smoke something else. The details are in the strain review but to make it short: 10/10 high, 9/10 taste, 0/10 grow (she hermed).

End off week 10 start off week 11 gave them a feed today think this will be the last feed of nutrients maybe a week to two left what’s everyone’s thoughts start flushing now or give another feed of nutrients then flush the next feed thanks for viewing happy growing :)

Onto her second round of flushing now, be down by Tuesday I think. Done better than I though she would give my the training, she said tiny and I wont get much off her at all but it's all good I just wanted to Get that structure with the mainline and further topping. Took it pretty well I think. Smells amazing by the way and go to one that real nice colouring 👌🏻 Buds aren't really compact or anything and there's a load o fox tailing but again it's all good 😁 Next entry will be the harvest

• This is what's in the box. The new fce6500 👍. Now i got the fce6500, the fc4800 and the tsw2000 that will be in the 8x8 Grow Tent 🤘🤘🤘🤘. Its so bright now I can probably get a nice tan in the tent🤣🤣🤣🤣👍. Next grow will be awesome so stay tuned for my next new diary that will have almost 50 strains🤯👍🤘. I will be keeping the drivers for the fce6500 and fc4800 outside the tent to keep the heat down. They don't get that hot but it will be better outside and I won't worry about extra heat. • New FC-E6500 Led Grow Light-FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective compared with other same type lights.Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. • Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliver • Superior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat, save 50% energy than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. • Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD FC-E6500 LED grow lamp enable cultivators to produce Density Buds, perfect for full-cycle hydroponic,soil,grow tent/room growing. Dimmable Commercial Grow Light: Cost-efficient,easy dimming & daisy chain max up to 20 lights, IP65 Waterproof, master light easily controlled for commercial & home horticulture. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress2 Instagram: @marshydropenny GET THE BEST FERTILIZER ON THE MARKET👍 GREEN BUZZ https://greenbuzzliquids.com/ #greenbuzzliquids @GreenBuzzLiquids https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA https://greenbuzzliquids.com/en/shop/ PROMO CODE: rocknroll FOR 15% OFF https://www.youtube.com/watch?v=8hEqyS1jPpI https://growdiaries.com/diaries/112437-grow-journal-by-rock-n-roll-randy/week/593118 GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍

Esa familia, siento actualizaros tarde pero esta es la última semana de crecimiento de las Blueberry cheese de zambezaseeds. Estos ejemplares están bastante sanos y vigorosos el color que tiene es un verde intenso, eso es bueno,siento las fotos con el foco pero es que es cuando abro el armario. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Bueno las maximas de temperatura no superan los 25 grados y las mínimas no bajan 19, así que no me puedo quejar. Los niveles de humedad también son los correctos van entre 50%/60% de humedad relativa. Por supuesto el Ph lo estamos dejando alrededor de 6. Hasta aquí es todo poco más la verdad ya con ganas de empezar la floración , buenos humos 💨💨💨

Let me guys know what you think! Feedback is always appreciated! 😎😎🙌 [DE] Tage sind an den Bildern angegeben - Pflanzen entwickeln sich sehr gut - ich entferne immer wieder Blätter - pH fällt, werde bald NL tauschen [EN] Days are on pictures - Plants are developing very well - I keep removing some leaves - pH is dropping, might need to change the res