Auto Candy Divine Seeds

GrowX420 The Candy is still standing, it survived the weather of the last few days and has resumed growth☀️ The last few days were a real struggle for the young lady, daytime temperatures on the balcony were sometimes at +40 degrees and she was in full sunlight ☀️🙈 An absolute mistake on my part💀 She is the only survivor of 6 plants and is doing quite well, slight burns can still be seen but she is recovering. ⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️ Currently, she is in my Marshydro 80x80x160 tent with a GC Pure 80 Watt ✅💚✅💚✅💚✅💚✅💚✅💚✅💚 UPDATE: 07.07.25 She seems to have recovered really well after this stress. She gets three spray shots of water (rainwater) twice a day to keep the surface moist throughout the day 💦 The temperature is at 24 degrees and the humidity is at 65% Current light intensity is at 246 PPFD☀️ ✅💚✅💚✅💚✅💚✅💚✅💚✅💚 EQUIPMENT: Light🌞: GC PURE 80Watt ✅️ Duct fan💨: S&P TD 350 silent.✅️ Carbon filter💢: Can-lite 300 Tent⛺️: Marshydro 80x80x160 ✅ Humidifier: Spider Farmer 6L. ✅️ So it will be an indoor grow after all😅 Happy Growing🤙🏻

GrowX420 The pretty lady named Auto Candy from Divine Seeds🍬 She is growing and thriving, seems to have handled the stress super well and is recovering from the heat; the two burns on the leaf tip and the cotyledon are the last scars from the battle 😅☀️ Currently, she is also forming the 2-3 leaf pairs and is very diligent about it. She gets 18 hours of light from a Marshydro TSW 2000 dimmed to 40%. Nutrients are currently only from the Lightmix; I will probably start adding additional nutrients in a few days (I'm still not sure which fertilizer to use 😅) I will probably start the first training from the 3rd true leaf pair 💪🏻 Otherwise, the lady is doing wonderfully, and updates will follow 😉 Happy Growing 💚 Watering: 100ml in 24-48 hours pH value: 6.3 Nutrients/Fertilizer: Humidity: 60% Temperature in the tent: 21-23 degrees PPFD: 370 EQUIPMENT: Light🌞: Marshydro TSW2000 300watt ✅️ Inline fan💨: S&P TD 350 silent.✅️ Activated carbon filter💢: Can-lite 300 Tent⛺️: Marshydro 80x80x160 ✅ Humidifier: Spider Farmer 6L. ✅️ HAPPY GROWING

GrowX420 Now it's week 3 for the young Auto Candy🍬. She has been topped and fertilized for the first time💚 I topped the Auto Candy after the 3rd true leaf pair, down to the first node. After that, she received 2ml of S&R Organics 5in1 in 1L of watering! According to the fertilization schedule, you can start fertilizing the plants from week 1😅 I'm personally not a fan of that, as there are usually enough nutrients in the medium (BioBizz Lightmix). But with Coco, that would be a different story😉 So far, a very robust genetic, let's see how she does💚 Info: Watering: 100ml in 24-48 hours pH value: 6.3 Nutrients/Fertilizer: S&R Organics 5in1 2ml/1L Humidity: 55% Temperature in the tent: 22-24 degrees Light duration: 18 hours PPFD: 416 EQUIPMENT: Light🌞: Marshydro TSW2000 300watt ✅️ Inline fan💨: S&P TD 350 silent.✅️ Activated carbon filter💢: Can-lite 300 Tent⛺️: Marshydro 80x80x160 ✅ Humidifier: Spider Farmer 6L. ✅️ HAPPY GROWING Update 14.07 The little one seems to have handled the topping well, considering it was only 2 days ago. The leaves have been doing quite a bit of photosynthesis 😅😅

GrowX420 The Auto Candy was lightly topped and carefully bent down to let more light through. Unfortunately, one shoot broke off, but I patched it up with duct tape; maybe it will make it! 👍🏼 It's under 18 hours of light at 392 PPFD and gets 2 ml of GreenPower 5in1 per liter of watering, with a pH of 6.4. Updates will follow soon! 🌱💪 Happy Growing UPDATE: Unfortunately, I had to remove the broken shoot from the Auto Candy; it just didn't make sense to leave it on 😔. And since the poor thing was already stressed, I thought I’d top it again to make up for the one shoot 😅😅 seems to be working out 😋. And its spot has changed again and is back in the outdoor area, where the grow is now finishing up.

GrowX420 The (Survival) Auto Candy An absolutely robust plant, surviving temperatures of +40 degrees and even 2 broken branches, plus it has survived topping and stands like a little rock 😅 It shows the first signs of flowering, developing fine white hairs and proving that she's a lady and now ready for bloom 💚 After the topping, 2 branches are growing straight up, it will stay small but is incredibly robust! So far, a very exciting grow 🍀

GrowX420 So the little Auto Candy is doing her job great, even after a week of ultra bad weather (thunderstorms, days of rain, minimal sunshine) she's standing there like nothing happened 💪🏼 A super robust plant Right now she's transitioning into flowering, I can only hope that the weather improves 🙈 She has developed 5 branches and is 23 cm tall, she's being fed with the Green Power 5in1

GrowX420 The "Survival" Candy from Divine Seeds 💚 I'm currently leaving her alone, she should focus on developing thick buds for now 😅 She should be stressed enough after all this drama The weather has finally improved and the sun is coming out again ☀️ hopefully, it stays like this for a while 🍀 Otherwise, she's still getting the 5in1 fertilizer from Green Power, next week I'll give her the phosphorus booster 💪🏻 Happy growing and wishing you all the best and good luck with your grows!

GrowX420 The Survival Candy🍭 Aside from a little defoliation, there's not much to report this week, the weather has been hot and the sun has been blazing, so nothing the little Survival Candy isn't already used to 😉 She seems to be developing 5 pretty MainBuds and I'm really curious 😃

GrowX420 The “Survival” Candy from Divine Seeds shows strong signs of foxtailing 🦊 The long tips "buds" without proper structure are a clear sign, I think. (That's definitely due to all the stress) She's just special, the little one 🍭 This week I just watered and fed her regularly. She smells really sweet and is extremely sticky, but unfortunately, there's the problem with the foxtail 🤨

GrowX420 The little “Survival” Auto Candy from Divine Seeds just before harvest🍀💚 I tried to give her a bit more phosphorus to possibly influence the “buds” a little more, but that didn't change anything either🙈 The stress that has been present throughout the entire grow is now beautifully visible, foxtailing, ultra-leafy buds that have no real structure😢 But that doesn't mean anything, because Candy Rosin sounds delicious too🤤🍯 I will darken her now and harvest after 72 hours🍀 Happy Growing💚

GrowX420 Making Rosin next step 🍯 BUBBLEHASH So after a few days in the freezer, I finally got around to making Auto Candy 🍭 Bubblehash (65g buds, sugar leaves) 🍯first step towards Rosin 🍯 Along with the Candy, I also had the trim leftovers from the Black Opium as well as trim leftovers from a Strawberry 🍓 Gorilla. (What a combo 😋) First, I put some ice in the bucket, spread the plant material on it, added the same amount of cold water, then more ice. I let it sit for 15-20 minutes to get everything nice and cold. I then stirred this mixture by hand for 15 minutes 😩 After the workout, I poured everything into the bucket with the Bubblehash bags, letting the water with the trichomes drain while the trichomes got caught in the microbags 🤙🏻 Then, I carefully scraped each bag clean (cold spoon recommended) And spread it on a 25-micron cloth 🍀💚 I did this three times, so three passes, which took about 3 hours 😅😅😅 Now I'm waiting for it to dry And then comes the final step 🍯 After a few hours, I'll go in and break up the structure with a cold fork so that the moisture can escape from the material, and I have a nice dry product at the end of the drying process 🍭🍯 HAPPY GROWING 💚🍯☘️🍭

GrowX420 This week I harvested the Auto Candy, after 72 hours in the dark I harvested it last night. I separated the buds from the stem and left the sugar leaves on 😌 Since the buds are very fluffy and quite leafy, I decided to freeze everything to make bubble hash and then process it into rosin 🍯 CANDY ROSIN sounds super delicious 🍯😋🤤🍭 Happy growing and good luck to you all with your projects 🤙🏻 CANDY ROSIN PROJECT IN FLOWER 11

GrowX420 THE FINAL STEP🍯 After 6 days of drying, I processed the bubble hash further☘️ For this, I used a Grasspresso V2 with 2 tons, which is super easy to use 😅 A 35-micron bag from Graveda was also necessary! I filled the bag with 2g of hash and placed it under the press, I pressed at 85 degrees with the timer set to 300 seconds. For the first 30 seconds, I only heated the material with the plates and then slowly started to press, increasing the pressure approximately every 20 seconds, and yeah, what can I say :) See for yourself 🍯☘️🍀💚