Week 10 Harvest, will update with dry results soon Use code GROWITGD for a 20% discount over at www.Zamnesia.com They have a wide variety of smart shop and headshop products, such as cannabis seeds, dried plants and herbs, vaporizers, magic truffles, and mushroom grow kits.

It's getting bigger. If i dont flip to flower i think in fucked but didnt get a clone yet :(

Did a little more lst… let me know if im doing something wrong or could be doing better, i appreciate every single tip and opinion.

The first week is over and little babies are doing nicely. As expected the growth is slowly progressing and I can already see small roots coming from the wholes at the bottom of little pots which shows the plants are healthy. They didn't need much water this week. I've started adding Canna mixture in little dosages not to cause stress. Also took some time to add two Bestvas 600 LEDs and made some house keeping and tied all the cables nicely to the skeleton of grow tent. All in all the plants are doing great, no problems so far and looking forward what this week will bring. Thanks everybody for all the likes and comments! 👌 Have a great week and healthy grow😁

Hey! I slightly bent the branches for even illumination, and also removed some of the fan leaves. At the end of the week I rinsed with FlashClean and am getting ready to form buds 😎 Thank you for stopping by, and be healthy! 🙏 To be continued... 😶

Got everything hung up. Stripped the fan leaves and broke down into sections. Run 60/60 or as close as i can get until the stems snap.

The permanent markers are doing alright. They're still really short compared to the others, but they're finally starting to take off. I can kinda see them catching up soon. The new year is off to a frosty start! We've had snow falling for what feels like forever. My kids are loving it, of course. They're building forts, having snowball fights, and turning everything into a winter wonderland. It's been a lot of fun to watch them enjoy it. All this snow is really making me think about how quickly time flies. It feels like just yesterday we were celebrating the holidays, and now here we are knee-deep in winter. I'm looking forward to warmer weather, but for now, I'm enjoying the quiet beauty of fresh snow.

Any advice on moving these or keep them all in square base?? The two females are random seeds, along with the ones in the ground. Can anyone tell if the ones in the ground are likely to be male or female? The two small ones in the video are fastbuds stardawg auto and grapefruit autos..

She has grown quite a bit over this past week. I'm excited to clone her and continue another cycle with good genetics. The watering routine remains the same, with alternating days of fertilizer and aerated tea. I also let it dry back for about 2 days. It's very healthy, with very green leaves and they're getting wider every day. I'll soon do a toppinp. See tou.

Day 89. Looks like they are not ready yet. Not that much amber. Only the Purple Haze has a bit more.

Report on week 3 of veg: I lower the RH to 50-55% while the RM stays relatively on the higher range: 27-29C daytime and 18-22 at night. I had nice visual on the 6th node of BB3, Larry Bird and Gelato plants and few cm. to avoid any eventual stem splitting, so i topped them. I guess the Gorilla will be ready for topping by tomorrow. Unfortunately i have to work with hard water so i have to keep constant eye on the water's EC. For this reason and from personal experience i wont increase the nutrients dosage any time before flowering. The high percentage of worm castings is doing wonders and help me a lot with the substrate's maintance. I did some runoff water measurements and end up with the following values: Gorilla had 2.75EC and 6.5pH, Gelato got 2.70/6.6, Larry 2.85/6.7 and BB 2.20/6.9. Substrate pH is 7.0. Once again, I have to say that Sunmaster's Dual Spectrum HPS are indeed super powerful lamps. I added another clip-fan to ensure a nice breeze around the plants. I will follow the general rule of thumb and give the plants 10-14 days to recover from the HST. Once i week i spray the plants with foliar iron-based nutrient solution👊 (Plagron Vita Race). It boosts the photosynthesis, plus it washes and cleans the leaves. P.s. only the Larry Bird is topped on the pictures. I topped other two today, but i didnt want to switch-off the lights in order to take pictures. Peace!

ok so this plant, im not sure when im going to need to harvest this. just like my gorilla glue, this started flowering early, and before i noticed since this is my now second plant ever to harvest. and really i still feel like its my first i didnt take anything away from my gorilla glue and i was really unhappy with the product i didnt know when to harvest it so it smells like nutes not bud. so if anyone has some suggestions on what i should do for harvest and when id appreciate it. im going to start flushing it the next couple of feeds so i can prevent the nute smell i got.

they do not seem mileage even after a week of fertilization even if at very low dosages the next time I increase the nutrients and let's see what happens Days 41 it looks like it's going well they still look nutrient deficient the next time we increase the dosage.

Last week of flowering and will be cut !!! Very well formed by dense heads along the branches. I just cut one top of the plant and it gave very good results! I smell the fruit! I have made some flush due to nutrients that i gave during flowering...💪

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Hey guys idk what’s going on my autos it seems as if the Gelato and Zkittlez has just stop growing completely I mean there’s no change at all the Zkittlez Og is starting to fill in forming nice little buds but my other autos seems like they had stop completely I know the lifespan on the Gelato is 76-80 days from seed to harvest The Zkittlez lifespan said the same 76-80 days from seed to harvest Zkittlez Og lifespan is 80-90 days from seed to harvest And I know I’m for sure March 9th marked the 60th day on all autos and I know I stress the hell out of them overwatered etc but it looks as if I might only have one plant to successfully make it yet this is my first grow and why I choose to do autos first to give me a little insight on what I’m doing but I’m going to let these girls go for a full 90 days before I decide to trash em and focus purely on my clone grows

I've got another clone.of this in the seedling station getting read for the next grow cycle. Once that is done I'll let this pheno die off and try more tfuck seeds see what other phenos pop.

(Days 28-35) (Day 29) Everything seems to have recovered fine from topping so I transplanted into their 1.7 gallon pots. They were pretty rootbound so this should make them nice and happy. Going to start LST after recovery. Got a ton of holes poked around the rim of the bucket which should make tying down easier. I’ve been asking around on some forums and reading some articles and I’ve decided to switch out my MH bulb for the included HPS bulb. Apparently HPS bulbs will stretch the nodes out quite a bit more and provide higher PAR value for the same amount of electricity. My plants are looking pretty small for day 29. Although, that could just be from stuffing 15 plants under one 250-400w light. I’ve been powering the lights up to 400w at night and back down to 250 during the day. 400 just gets it too hot during the day (86-88) without ventilation. That temperature should be fine in veg once my co2 has really built up some mycelium. (Day 32) Just got 14/15 topped. The BCTG runt is just going to be lst’d and not topped or fimmed. I decided to just fim the plants I started later so they’d have a bit more time to recover and catch up to the others. I also LST’d all 9 quite well. Almost had a stem break but she’s doing just fine now. The deformed bbb was accidentally fimmed and as a result it’s got a very trippy looking main stem that has branched off into 6 mains. I definitely have fungus gnats. Fuckers must have got in with that coco I bought from hydro store. This has never happened to me with just promix but the benefits of coco are too much to pass up. I might order an OG BioWar/capsbennies/grubgrenade to help naturally get rid of them. I’m getting some confirmed yellowing on bottoms of the zkittlez and WW’s. They must be heavy feeders because no other plant in the tent is getting yellow like that. I’m going to feed a compost tea, top dress everything at full strength and mulch in some worm castings to help break it down faster. Will also do a foliar spray with some insect frass, microbes and m1pps. (Day 33) Got some more of that marine phytoplankton stuff to help stabilize my RO water. It’s got a good amount of soluble magnesium and trade minerals in it so that should help stop the yellowing on the zkittlez and WW. (Day 34) Things are looking great so far and they’re all recovered from topping/transplant/lst and thriving. Some slight yellowing and a few of the plants are cupping from heat and high humidity. I just put in a dehumidifier to help bring the rh down. The m39/zkittlez bagseed plant is just outpacing everything in the tent by 4-6 days. No wonder organized crime used to grow it. I hear it can completely flower in 45 days with a solid yield and very little trimming or leaf matter. It’s very weak on the high and smell though. Nonetheless it should be nostalgic to try those old terps. There is still a small chance that it’s a super vigorous zkittlez plant too. Plants should be showing sex this coming week. Hoping for 8+ fems but I can make do with just 4. 1-3 is unlikely but that would piss me off beyond belief. I’ve heard of it happening though.