06/02/2021 Harvest day! Quick update More to come soon! Did a quick wet defoliating, and hang dry starts! It's my last indoor run as I will be moving soon. Ps. I will still be watching everyone else having fun! Lol😀 06/29/2021 3 weeks in jar testing at July, 4th party with family and friends so final update will be after the 4th festivities.

As you can see here they have gone a much darker green thanks to the amendments starting to get broken down by the microbes. I will be doing some LST and FIM this week to ensure a bushy plant ready for the outdoor by the end of the month.

🤠🌱

Very sticky snd dense nuggets,tons of resin in this autoflowering strains, they are high quality, as you guys can see both wedding cakes auto by original sensible seeds have the exact same resin production, very frosty both, very sticky and big fat main colas with all the buds from the lower plant are also fat, dense and sticky, just a dream come true 💎 very good automatic strain, doesn't even looks like an auto, super sticky and a very pure and strong aroma, she's been fed with only organic dry amendments by guanokalong complete organics and seaweed powder and florganics that's how I prepared her soil. Thank you so much everybody hope you like another diary of frosty cookies 🍪🤤🍭🌸✌️💚❤️

Another nice week of beautiful weather. Have been on total cruise control this week on a little water here and there. Did some topping and super cropping. Not much at all to report the fast buds are in full flower and doing well. Happy growing folks🤙🏻

OK, so we started the 6th week and the plant is showing some growing signals. It's impressive how a plant that looks really bad, can actually keep growing and developing itself. This week I've started to see some development on bud zone/spot, and I believe that even making some mistakes ate the beginning, I'll be able to taste some buds from this little girl.

This one may be over but theres more going on right now! Check out my other grows to see what I'm up too.😉

12/25/2023-Germination Day 1 Merry X-mas 2023 I decided to start a run of SolFIre Gardens Hoodz Candyz S1. I am going to do a cup filled with RO water a touch of Hydrogen peroxide and let it sit for 24-48 hours until I see tap root then I am going to put it into a rapid rooter.. Tap root Down and put it about 1/4 of the say down the Rapid rooter. I made some modifications to my basket on this run.. I have taken a few Pods that I use for my cloning machine and decided that I am going to try and use them as sure plants, so that I can take my water right up to the bottom of the basket this time and see if these can make my planting more consistent.   12/26/2023-Germination Day 2 Tap root achieved Planting Commencing 12/27/2023-Germination Day 3 Misted the dome lightly misted the rapid rooter and added a little water to the bottom of the pan to encourage root growth to the pan. 12/28/2023-Germination Day 4 Ground Hogs day 12/29/2023- Germination Day 5 She is up, she has broken surface, I misted the root riot, and around the bottom of the tray to try and entice root growth down rapidly. 12/31/2023- Germination Day 6 Ground Hogs Day 1/1/2024-Germination Day 7 HAPPY NEW YEARS!!.. I did it I planned it out so my planting day would fall on New Years and it worked.. Yay!!! 1/2/2024- Germination Day 8 Since the roots are not to the water yet, I am pouring one cup of water lightly on the hydroton around the lady to try and encourage root growth down to the water.. 1/3/2024- Germination Day 9 Ground Hogs day, will continue until roots hit the water. 1/4/2024- Germination Day 10 Ground Hogs day, will continue until roots hit the water. I will just continue to top feed until roots are in the water.. Shouldn't be more than a few more days. 1/5/2024- Germination Day 11 Ground Hogs day, will continue until roots hit the water. I am going to change the water Sunday and kick off Week 1, I will just continue to top feed until roots are in the water.. Shouldn't be more than a few more days. 1/6/2024- Germination Day 12 Ground Hogs day, will continue until roots hit the water. I will just continue to top feed until roots are in the water.. Shouldn't be more than a few more days. 1/6/2024- Germination Day 13 Ground Hogs day, will continue until roots hit the water. 1/7/2024- Germination Day 14 Ground Hogs day, will continue until roots hit the water.

Thought I would have harvested already, but from the little I'm able to see, there still aren't really many, if any amber colored thc crystals, so I might wait some more days. The second plant remains 1 week or so behind but might soon catch up and they could come down at the same time. Still only flushing with water, some leafs are starting to curl and dry off. I'm just a bit paranoid that it is time to cut, I'm just not seeing the amber color because the camera can't pick it up. ¯_(ツ)_/¯

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Spokojenost jenom jsem nefotil moc spíš točil videa

13/07/2020 - growth looking good. Highered lights to try to get plant to stretch 14/07/2020 - plants green and seems to be responding well to nutrients. 15/07/2020 - all looking good

I hope she dries fast 😄

Original Sensible Seeds White Chrystal Meth Auto 🔸🔸🔸04.20.23🔸🔸🔸 Day 45 - Above Ground - Target 65 Days 📝Sunday 06.04.23 - Watering with H20 PH@ 5.8/6.2, this girl is eating up the Gaia Gree and loving the Far Red Ligh from the Medic Grow Smart 8 set in the Flowering Mode at 60% power, I am amazed at how much this girl has grown over the last week, almost doubling in size, PPM was completed yesterday, using MAMMOTH CannControl @ 30ML per gallon, the plants love this stuff, always spray right at lights out. 📝Thursday 06.01.23 - This girl is very small, I am sure she will produce flowers we will see how the Smart 8 Set in Flowering Mode pushes the flower production with increased far reds. 🔸🔸🔸🔸🔸🔸🔸🔸🔸🔸 ▪️Grown By: MrJones ▪️Medic Grow Smart 8 LED / Settings 60% & V1 ▪️@medicgrow420 ▪️@originalsensibleseeds ▪️@gaiagreenorganics ▪️Soil - ProMix HP 🔸🔸🔸🔸🔸🔸🔸🔸🔸🔸 📝The taste and aroma of White Crystal Meth Auto are equally appealing as her shining stunning looks and hard-hitting effect. The taste and aroma are a throwback to the Old School, Skunky with herbal and citric tones, and overall a great strain for making hash or rosin. These tantalizing flavors and aromas are conjured up from an exquisite formation of terpenes the earthy myrcene and the floral essence of terpinolene being the dominant, a mix of caryophyllene and pinene combine their tones to produce the musky citric scent.

Green House Feeded one is enjoying life and keeps stretching. Advanced Nutrients one moved to left top corner and she seems to be doing better than last week. Light intensisty is at 90% in 50 cm distance.

Day 37 from seed. 2nd day into week 6. -My focus for this week is to keep room temperatures under 75 degrees since I notice that my roots don’t like high nutrients temp. And since I m in DWC single 5 gallons bucket I don’t have the possibility to chill the water. So I have to keep the room temp lower then I wish to. - Day 41- I have to add nutrients and PH down every 12 hours. My PPM’s goes from 450 to 390 and my PH drift from 5.7 to 6.2 in less then 12 hours. Also I notice some rust on older levels (probably Ca/Mg deficiency). After some research (I’m new to this) I decided to up the nutrients to 600 PPM’s. Hopefully is a good decision. I will really appreciate some feedback.

The pound cake auto so far is an amazing plant. It has grown great and is super strong. Honestly it might be the strongest growing plant I have ever grown The weather is starting to warm up a bit it has been below freezing for over 30 days and now the snow is starting to melt finally it’s a lot easier to keep the humidity on point when it’s like 32 outside compared to 10