Getting there... cant wait for Spring Walls are up and painted, floor is laid, electrical all done, exhaust outlets mounted. Ive started to install the trim - I decided to put a grey stain instead of boring paint on the floor trim boards. Looks really solid against the dark bamboo floors. I used two gallons and two coats of flat pure white paint for walls and ceiling. Should give me a reflectivity somewhere around 80%. Some may ask why not opt for mylar? I just dont like the look. I dont care too much for reflectivity, as I will be well above the required watts/sqft with the light setup I will be using. I mounted an electrical receptacle in the ceiling, I thought it may come in handy for cord management. Im going to mount the 3 x meanwell drivers outside of the grow room and run some extra long cables to them. This is to keep heat out of the room, any little bit helps. Will be running a 8inch fan with about 750 CFM in order to properly vent the room. Intake will be a door vent and the negative pressure the fan provides. Odor is not too much of a concern, but may as well add a carbon filter. Tables to be built this week after trim is installed Week 1 Spend - $2080 Week 2 Spend - $350 (mostly on hardware store visits) Total so far - $2430

Durch und durch easy zu handhaben, war mein erster grow und hat top

I started using fertilizer. I use biobizz grow, fish-mix and alg-a-mic. I water it 2 or 3 times a week, adding the amount of fertilizer I specified in 1 liter of water each time. Huge difference for last week. I think I'm progressing well

Flowering is fun! Smell is getting better every day, the color and the leaves look good. Still lst the plants for now tent is filling up nicely I’ve can’t see anything that’s going wrong :) ❤️

Last week of feeding. Started the flush already, eyes still pinned on the 25th for harvest.

2018-03-20 Day 1 New week and not much to say. No water or nutes today, just the regular weekly check to see that they look nice and healthy. Raised the lamp about 10 cm to make sure that the girls don't get burned again. Zombie Kush nr1 is 58 cm Zombie Kush nr2 is 68 cm 2018-03-22 Day 3 Gave the girls 2l water/nutes this morning. ----------------------------------------------------------------------------------------------------------------------------------------- Strain information From the selection of one of Ripper seeds first genetic search works, an old Lavender Kush clone was pollinated by brilliant Amnesia. From there a clone that we named “Sideral” was selected and decided to pollinate it again later with Bubba Kush. Its vegetative cycle should be generous if we want to develop the full potential of its Indica demeanor. With a low EC both in the vegetative and the flowering cycles we will get spectacular results. Its purplish colour scheme and the great quantity of trichomes that cover its large flowers would make this strain a key one for Kush flavor lovers. Vegetative: From 2 to 4 weeks Genotipe: 20% Sativa / 80% Índica Indoor flowering: 55/60 days. Production: Medium / High Effect: Powerful / Durable ------------------------------------------------------------------------------------------------ https://www.youtube.com/watch?v=G8sSHdfbu1g https://www.youtube.com/watch?v=-Twzz8lBfEQ https://www.youtube.com/watch?v=PnE5ixD9iTE https://www.youtube.com/watch?v=bDyJXP4vEG8&t=906s ------------------------------------------------------------------------------------------------

Starting flush on both think blueberryz z will be ready by next week limoncello about 5 days after. Going to do a cold shock on then start of next week try get some purples. Blueberryz has stretched something rotten know what todo next time to stop that. Limoncello just perfect got 2 more seeds thunk may make one

Leaves started to be more and more yellow. In fact, I don't know why. The nutrients I keep based on the Plagron table. I have few theories. Lack of Nitrogen, Lack of Calcium, End of the life cycle. Who knows. I will add a bit more nutrients.

Yesterday i took off some Leafs down there. Looks Like a Bouquet now 😄 She's responding great to the Training i have her. I'm pretty exited how she'll do in the Future weeks 🤙🏽

B.A.C. schedule goes on with bloom week 6 : a bit more PK Booster again and no more Final Solution. Motherplant looks better after a massive plain water watering, I'll alternate nutritive solution / plain water for now. Clones buds' are getting fatter, faster than motherplant ones, and a few big leaves are yellowing. There are trichromes everywhere and smell is more powerfull. 2023/04/12 : first check on trichromes... there are already amber ones on clones' leaves, not yet on flowers. Mother plant is a bit late, only clear and cloudy trichromes for the moment. I would say 2 to 3 weeks before harvest.😊

This week we started to give her only water. Very few new pistils are showing and mostly cloudy trichomes. We are in the final stretch now - thinking 4 to 7 days.

Esta semana fue solamente de flush 🚿 en esta ocasión decidí usar florakleen para ver con cual obtengo mejor resultado si con este o con flawless finish, lo hice así, primero hice un lavado con pura agua con ph de 6.2 lo hice desde el ultimo día de la semana anterior, fue lavado doble, uno en cuanto se encendio la luz y otro justo antes de apagarse, luego empezando esta semana regué dos dias usando el florakleen y ph de 6.2, el tercer día no regué y al final de ese día le di corte ✂️ y la colgué, actualmente ya la tengo curando, la tuve 10 días secándose con una humedad de entre 50 y 60% para un secado lento.

A few things that needed attention 🌱💡 There’s some light burn and bleaching on the upper leaves, which also caused minor deficiencies. I’ll keep an eye on it, but aside from providing plenty of nutrients, I’m not planning to make any major changes. I can’t raise the lamp any higher — it’s already at the top of the tent — and I’m not lowering the light intensity below 700 PPFD at the centre, since that would drop the levels too much in the corners of the grow space. So, we’ll keep pushing! 💪 The leaves below the canopy are still very healthy, so I’m not too worried. I’ll continue feeding nutrients with every watering, as the new growth (especially the sugar leaves) looks fine. However, one of the Purple Lemonade plants looks pretty fried, even though it’s been treated the same as the others. I’m guessing it’s down to genetics. 🍋 So that’s how we roll — still very optimistic! 😎🌿 Stats so far: 💧 Watering: 1.5L every other day 💦 Humidity: ~60% RH 🌡️ Temp (lights on): 22–26°C 🌡️ Temp (lights off): 20–22°C 📈 Avg. VPD (lights on): ~1.35 kPa

This plant is a Beast! Can’t believe how big she is for being in a 20 gallon pot. She is starting to fatten up now! 🍿😎 Dinafem nailed it with these genetics!

I have cloned these of a previously grown sherb biker showing excellent structure, low leaf ratio and nice beautiful purple rock hard buds. Previously grown this plant in single pot grown among other plants and still reached 432g wet weight. This will be a heavy production plant under my biggest, brightest king bight 800w actual draw. It might even surprise me. Subscribe and stay tuned. The lights switch today. This plant has been topped and has been selected tops for a total of 36 tops. Normally this would be tight, but this plant has proven to be very low leaf count and therefore doesn't overshadow much area. 3 days ago i levelled all the tops to ~16" and removed all but one bud site on each top. They have grown by about 3" and have now been moved directly under the 800w light.

Estuvo bastante bien, esto lo lleno con lo que recuerdo para que no borren este diario que es una suma de mis cultivos pasados. Saludos!

Day 59 week 3 of