The Grow Awards 2026 🏆 
Likes
Comments
Share
@DogDoctorOfficial
Follow
Hey fellow green thumbs! 🌿💚 We’ve just wrapped up the third week of flowering with our Auto Fast Pete and Auto Northern Dragon Fuel from Super Sativa Seed Club. The excitement continues as our ladies flourish and develop beautifully. Let’s dive into the details!
🌟 Week 7 (Third Week of Flower) Progress:
Day 43-45: Bud Development and Light Schedule Change
• Auto Fast Pete: Pete is continuing to bulk up, . The aroma is intensifying, and the plant is stretching slightly under the new light schedule. 🌿🌸
• Auto Northern Dragon Fuel: Dragon Fuel is showing impressive bud development as well. The change in light schedule hasn’t slowed her down one bit. 🌱✨
Day 46-48: Adjusting to 12/12 Light Schedule
• Light Schedule Change: This week, we changed the light schedule to 12/12 due to another autoflower in the tent that wasn’t flipping. We couldn’t take any risks, so now all our plants are on a 12/12 schedule. This adjustment has been seamless, and our ladies are adapting well. 💡🕛
• Environmental Conditions:
• Temperature: 31°C
• Humidity: 51%
• Reservoir Details:
• TDS: 400
• Temperature: 18°C
• pH: 6.2
Maintaining these conditions to optimize bud development and plant health. 🌡️💧
Day 49: Observing and Fine-Tuning
• Auto Fast Pete: The buds are continuing to grow and mature. The plant’s overall health is excellent, with vibrant green leaves and strong stems. 🌿🌼
• Auto Northern Dragon Fuel: The bud sites are more defined, and the plant is showing no signs of stress. The foliage is lush, and the buds are dense and sticky. 🌱🌟
🌟 Care Tips:
• Light: Adjusted to a 12/12 light schedule to ensure consistent flowering across all plants in the tent. The plants are responding well to the change, with no signs of stress. 💡
• Autopot System: The Autopot system ensures a steady water supply, reducing the need for frequent manual watering. This system is great for maintaining consistent soil moisture, which is crucial during the flowering phase. 🌊
• Nutrient Monitoring: Keeping an eye on the reservoir’s TDS and pH levels to ensure the plants receive the right amount of nutrients and minerals. This week, we’re focusing on organic soil nutrition supplemented with regulator and CalMag. 🌿
• Environment Control: Maintaining a stable temperature of 31°C and humidity around 51% to create the perfect conditions for flowering. Adjusting airflow and positioning to optimize plant health. 🌡️💧
🌟 Genetics Spotlight:
Auto Fast Pete:
• Characteristics: Rapid bud development, strong structure, and early resin production. This strain is living up to its name with a fast and vigorous flowering phase.
• Future Expectations: Continued bud swelling and resin production. Anticipate dense, aromatic flowers ready for harvest in the coming weeks.
Auto Northern Dragon Fuel:
• Characteristics: Robust structure, dense bud sites, and resilience. This strain is showing great promise for a high yield and potent flowers.
• Future Expectations: Significant bud growth and increased resin production. This plant is gearing up for a heavy yield.
🌍🌿 Fun Fact:
Did you know? 🌿✨ A 12/12 light schedule is typically used to induce flowering in photoperiod plants, but autoflowers can still thrive under this schedule, especially when sharing a space with other plants that need the light cycle adjustment.
For all the in-depth action and detailed explanations, head over to my YouTube channel! 🎥✨ I’m sharing all the tips, tricks, and step-by-step guides to help you get the best results from your grow. This week has been particularly exciting, and there’s so much more to explore and learn together!
👉 Join me on YouTube Link in my profile 👈
🌟 Conclusion:
Week 7 marks the third week of flowering, with both Auto Fast Pete and Auto Northern Dragon Fuel showing remarkable progress. The buds are developing beautifully, and the plants are thriving under our optimized care regimen, even with the new 12/12 light schedule.
Stay tuned for Week 8, and happy growing! 🌿💚✨
#SuperSativaSeedClub #Week7Report #FastPete #NorthernDragonFuel #PlantMagic #GardeningJoy #NatureLovers #PlantPower #InspireGrow #YouTubeJourney
Germination method 🌱 @thecannakan
Genetics @supersativaseedclub_official
Nutrition
@aptusholland 🌿
@aptus_world 🌎
@aptus_es 🌍
@aptusbrasil 🌱
@aptus_thailand 🌿
@aptus_portugal 🌳
@aptususa_official 🍀
@aptusplanttechnz 🌺
@aptusplanttechaus 🍃
Ambient controls🎮
@trolmaster.eu @trolmaster.eu.support @trolmaster.support @trolmaster.agro
Soil @promix_growers_eur @promix_cannabis
LED - @lumatekeu
Watering- @autopot_usa @autopot_global
Love and attention- @dogdoctorofficial
As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚
More info and complete updates from all my adventures can be found ⬆️link in the profile description ⬆️
Friendly reminder all you see here is pure research and for educational purposes only
💚Growers Love To you All 💚
Likes
5
Share
@Kinghaze
Follow
Harvest day !
The plants are chopped and are hanging to dry.
I put in a dehumidifier and a humidifier to control the humidity around 60%.
The goal is to dry for 10 to 14 days.
Then i will trim and cure them in grove bags for 6 weeks.
I put the mutant straight in a zip lock in the freezer.
I will make fresh frozen bubble hash (full spectrum) out of this one.
I will update if the buds are dry en trimmed 🍀✌️
Likes
10
Share
@MarryJuan
Follow
Been trying to slow them down, defoliation and topped them tied down, doing well can’t defoliant fast enough. Guest room getting full
Likes
6
Share
@Ferenc
Follow
Hey! Just back well I started a diary but stopped growing so placed to my friend's house. Now I decided to be back and yeah here we go....
They are nice fertilization happens 3x a week with the mixture of Biobizz family (Biobloom, Topmax, BioGrow, Epsom salt, Gunokalong extract.) They grow as hell. 600W LED, 18 hours on 6 hours off, 200 ml water per plant a day, humidity approx 35 percent.
Day 49: More LST has been done they grow unbelievably fast...
Likes
15
Share
@Acid_joker
Follow
Я. Растила красавицу с свежава года КАкда. Фрукты. Срезать друзья
уже 5 месац. Пашол?
Likes
4
Share
Likes
2
Share
@CanadianFillmore
Follow
Week 9 - flushed with plain water. Plants have a great smell and are insanely sticky! Buds are looking very dense and heavy, a bit more than round 1.
Likes
24
Share
@BudMunchies
Follow
03/23/25:
I’m very pleased with the progression of this grow so far. All five plants are showing consistent and vigorous growth, and each one has maintained the same level of vigor and size relative to the others since sprouting. This consistency is a good early sign of genetic stability and uniform structure, which will help with canopy management as we move further into veg.
At this point, each plant is developing its 4th and 5th nodes, which is a key marker in early vegetative growth. Once the 5th node is fully established, I’ll consider topping or training, depending on the growth structure and the phenotype expression of each plant.
After removing the humidity domes last week, I noticed that the first set of true leaves—which had been sitting in high humidity—developed browning on the edges. This is a common reaction when leaves are exposed to open air after having retained too much surface moisture.
Fortunately, this issue was limited to the oldest leaf set. All new growth has adjusted perfectly to the environment inside the tent, showing healthy development and no further signs of stress.
The plants’ deep green color indicates that they are receiving sufficient nitrogen, which is essential during this stage of growth.
Additionally, some of the larger fan leaves are beginning to curl slightly inward, which may look concerning at first, but is actually a natural response to airflow. The plants are adjusting to the oscillating fan in the tent—modifying their leaf shape to be more aerodynamic. This airflow helps:
• Strengthen stem tissue through gentle mechanical stress
• Promote root zone development as the plant adjusts its internal resource allocation
• Increase resilience to environmental fluctuations
So far, no roots are visible at the bottom of the starter pots, but I expect them to show in the next couple of days. As soon as they do, I’ll transplant each plant into 1-gallon AirPots.
AirPots encourage rapid root pruning and horizontal expansion, which leads to more efficient nutrient uptake and a healthier root system.
Once the transplant into AirPots is complete, I’ll provide a full update along with new photos showing their root development, new environment, and how they respond post-transplant.
Everything is looking on track, and I’m excited to see how each of these phenotypes continues to express themselves over the next phase.
03/25/25:
Today I relocated all five plants from the 2x2 seedling tent into their permanent home: the 4x4 AC Infinity grow tent. This is an important environmental shift, so I’m allowing the plants some time to adjust before making any further changes like transplanting.
They’re now sitting under the AC Infinity S44 grow light, which is currently set to 20% power. The light is positioned 24 inches (approximately 61 cm) above the canopy. According to my budget PAR meter, the plants are receiving around 350 PPFD, which is a safe and effective intensity for young vegging plants still acclimating to their new space.
Although the original plan was to transplant them into 1-gallon AirPots around this time, I’ve decided to delay that by a couple of days. Environmental shifts—like new lighting, airflow patterns, and spatial layout—can stress young plants, so I want to give them time to adjust before introducing transplant stress.
This move also gave me a chance to set up the AC Infinity AI+ Controller, which I won in a contest last year (huge thanks to AC Infinity).
So far, my first impressions are positive:
• Setup was just as smooth as their other controllers.
• It’s already doing a great job managing the environment passively.
• I haven’t explored all of its automation features yet, but I’m excited to see how much precision it can offer, especially for managing VPD and dialing in climate conditions throughout veg and flower.
Once the plants have had time to settle into the new environment, I’ll transplant them into their 1-gallon AirPots and provide a full update with photos.
Likes
17
Share
@4chuk
Follow
Dec. 25 - Merry Christmas! Week 12 begins.
Dec. 31 - I gave her 1 Litre of nutrient solution and about 500 mL spring water over the week, starting the day with a spring water flush then continued the day with nutrient solution.
Likes
5
Share
@doobieandthedutchess
Follow
Another week down. The timer is fully switched back to 12/12. It took a week to get there but the ladies don’t seem to mind. The gruntz is still queen of the show, or the biggest. She seems to want to take over the whole tent. Amazing how big she is getting. The Bruce is a close second. Only a few inches shorter. The widows are there and are nice but they aren’t reaching for the stars like the gruntz. They are all beautiful, what can we say, we love all our ladies. There isn’t any smell off them yet, you can get a whiff rubbing the stalk, but not strong yet. We did a defoliation this week, but I don’t think it shows. We also took a few more clones off the bottom branches. The first try of the gruntz didn’t do so well. Try ,try again. Otherwise it’s been a good week. The Dutchess and I thank you for stopping by, if you see anything we can do better let us know. Otherwise spread some love and share some bud!
Likes
57
Share
@Roberts
Follow
Pablo Escobar is moving along, and doing some bulking. She has a citrus aroma to her as well. She has been doing great, and will be a few ounces when done. Nothing more to report at the moment. She has about 3 weeks left roughly. Thank you Spider Farmer, and Divine Seeds. 🤜🏻🤛🏻🌱❄️
Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇.
Thank you Happy Growing 🌱🌱🌱
https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
18
Share
@Silverback_Guerilla
Follow
11/30:
I harvested the first 6 today, flushed 5 more for the second time, and fed everybody else for the last time.
I washed all the branches using the 4-step method ascribed by Doc Bud at High Times/420magazine and many other notable cannabis connoisseurs, with slight modifications:
4 x big plastic totes/bins
8 x ounces of 12% hydrogen peroxide (or 32 ounces of 3%)
2 x cups of concentrated lemon juice
2 x cups of baking soda
10 x gallons of water in each bin
Unless your tap water stinks, you're safe to use tap water for the procedure, but I used an inline carbon hose filter to fill my buckets.
Bin #1 - 10 gallons of water mixed with the hydrogen peroxide
Bin #2 - 10 gallons of water mixed with the lemon juice and baking soda
Bin #3 - 10 gallons of water as hot tap water
Bin #4 - 10 gallons of cold tap water
I was mainly concerned about removing as much lint and cat/dog hair as possible, but also rinsing off any residue left from all the various foliar applications of humic/fulvic acid, kelp, axiom, big bloom, and tiger bloom I did. First, I put my leaf blower on low speed and blasted my plants thoroughly, one at a time, replicating 50-60mph winds for about 10 seconds and watched as a whirlwind of debris and hair flew out the back door.
Bud-washing:
Pluck any necrotic plant material and any old fan leaves off while they're still on the plant. Then, take a handful of branches and submerge them in Bin #1 for about 30 seconds, agitating it, removing from water, submerging again, agitating, etc...then remove it and let it drip out for a few seconds...then repeat the process with Bins #2-4. Let it drip dry overnight with a little bit of airflow, then dry as you normally would...baskets, boxes, etc..
I hadn't watered these plants in a few days, so they were almost in draught, but after doing this procedure, they were fully hydrated(turgid) and seemed to have brighter colors than before. Nice!😍
12/1:
The bottom part of the closet seems empty with only 9 plants in there.. 😟
I cut the harvested plants up and put them into drying baskets in the top of my closet with a small oscillating fan on. I've got the temperature fluctuating between 68f and 75f and the RH is staying between 48% and 52%.
To do that, I had to take down the small light in the top of the closet to fit the drying baskets up there. So, I moved the 3 shorter plants still up there down to the bottom and put them on top of buckets. Now the bottom of the closet looks full again!😃
I'm anxious to finish up this grow so I can get busy growing the Fastbuds Fast Flowering Photo Testers!!! When I harvest the next 5, I'll flush the remaining plants really well and that will be all the flushing they'll get..I'll let them dry back out for a few days and harvest them. I've got to make some minor improvements to the garden (adding UV, blue and red/far red booster panels and intake fans) That should put me on track to start germinating them by mid-December if all goes well.
12/3:
...early a.m...
The harvested plants are already dry!?!?? And have excellent texture??? Wow..bud washing is for real..roughly 48 hours after I hung them to drip dry, and 40 hours after I put them in baskets in 50% RH/70f conditions with moderate airflow...usually takes 4 or 5 days to get a good slow-dry in the same conditions, so I'm convinced that this must be attributed to the bud-washing procedure. I'm sold!
Here's the talley so far:
plant #1 - 115g (plus 13g larf) - Candy Cane [F2]
plant #2 - 108g (plus 18g larf) - Candy Cane [F2]
plant #3 - 119g (plus 15g larf) - C4ndycaine [Candy Cane x C4]
plant #4 - 92g (plus 6g larf) - Candy Cane [F2] - the smallest plant in the main area
plant #5 - 112g (plus 22g larf) - Candesia [Candy Cane x Amnesia]
plant #6 - 75g (no larf) - Candesia [Candy Cane x Amnesia] - grown in upper area under 200w
...afternoon:
I flushed 6 of the last 7 plants for the first time today and harvested 4 more of them. I washed them and hung them to dry.....my dripping wet bathing beauties!😍
Likes
8
Share
@I_Identify_As_A_Dan
Follow
Week 10 for Ztrawberry by Greenhouseseedco,
Her colour is getting so much better! Look at that darker green coming in with the new growth. Still needing her to toughen up a bit before we get into flower.
Likes
12
Share
@GREENPHOENIX6262
Follow
Fastbuds - Mimosa (2x) 08/27
Coming into week 4 Veg, User error stunted them lightly but things seem back on track.
Exhale 365 C02 bag introduced last week to setup for early flower.
No signs of concern or any deficiencies.
Early flowering has begun
*Mid-Week Update* *08/30*
Both plants have recovered nicely, and placed under trellis net.
Introduced NPK Phosphate
Purged Pure Blend Pro Grow
*End of week recap*
Flowering has begun
Stopped veg nute feed
Introduced Raw NPK Phosphorus and Potassium
Likes
9
Share
@Rock_n_Roll_Randy
Follow
All the photos are in the 8x8 now just a few autos in here now
FOR EVERYTHING MARS HYDRO VISIT:
www.mars-hydro.com
www.marshydroled.ca
PROMO CODE: rocknroll
VISIT THE ALIEXPRESS STORE:
@marshydro_aliexpress
Instagram: @marshydropenny
Thanks for taking the time to read and check out my diary🤜🤛
TS3000 FEATURES:
WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems.
HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom.
HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000.
BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below.
COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups.
Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake.
High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights.
Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light.
Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds.
Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy.
Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair
5x5 GROW TENT:
LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all
DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal
EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air
AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER:
Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment.
GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors.
EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting.
LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment.
EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment.
BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball.
Likes
63
Share
@ElNass
Follow
Harvest was completed after a full flowering cycle, cutting the plant at peak maturity. Buds were dense, resinous, and already showing a strong terpene expression at chop.
Drying was carried out slowly and in a controlled environment, prioritizing terpene preservation and overall quality over speed. Low temperatures and moderate relative humidity were used, starting with whole branches and then adapting the process based on bud size and density.
Due to the density of the flowers, internal moisture migration required close monitoring during the first days. Drying conditions were adjusted when necessary to avoid overdrying the outer layers while allowing moisture to escape evenly from the core.
By the end of the drying phase, buds felt dry on the outside while remaining slightly elastic inside. Resin production was very noticeable, with buds staying extremely sticky and aromas already opening up.
No signs of mold or off-smells were detected, only clean and expressive genetics coming through.
The buds have now entered the curing phase, where the final aroma and flavor profile will fully develop.
A final update will follow after 2–3 weeks of curing.
Likes
63
Share
@CrazyHorse
Follow
Good afternoon gromies 😄 😇 😊
Week 9 was absolutely crazy. All my girls start to achieve an about high.
NYC diesel is a smallest as she was but developing beautiful small hairy flowers 💐 😍 😇
Have a good night, You Lovely Girls Growers 😇 🙏 😉
Likes
13
Share
@HashCakes
Follow
Many signs of flower but calling this week veg.
This has been such a simple grow. Very light food and water intake. Keeps the res nice and stable. I just raise the lights a couple inches every few days. For topping, alternate between 100% solution and plain water too keep my PPMs up.
Likes
23
Share
@MistaOC
Follow
*******************************************
11.02. Day 16
*******************************************
13.02. Day 18
*******************************************
16.02. Day 21
*******************************************
Processing
Likes
13
Share
@Cheesefarmer420
Follow
Growing this popsicle cake definitely had its ups and downs. What started out looking like a dud of a seed turned out to be something pretty spectacular. Stacks the buds nicely to fill up the whole colas, super frosty, with an un godly stench of sweaty dirty socks. Still in the curing process but definitely has a heavy indica punch!
Likes
5
Share
@Bluethum94
Follow
Plants are taking off but started showing signs of stress not for sure what the issue it is but since I’ve noticed I moved the light up and have only been giving clean water phed to around 6.5 I’m watching new growth to seen if the stress has lightened up