Likes
Comments
Share
Another great week of sunshine , plants are well into flower now and looking great. Been down and have a good feed of grow and bloom. That’s all this week, happy growing 🌱
Processing
Likes
4
Share
@Andres
Follow
she grows healthy outdoor ... the flowering begins for her .. we will see the process hopefully it will be a good...
Likes
26
Share
This girl is a monster. All the other girls got chopped over the weekend but she wasn’t ready. Now she gets the tent to herself and she is loving it. I bent all her branches down as much as I could to spread her out even more. I’m thinking a week, maybe two left. The other girls are hang drying and once they are done I can trim, weigh, take pictures and then I’ll update my harvests!
Likes
5
Share
Likes
16
Share
This week I transplanted them into their final homes, 2 liter mountain dew bottles. I cut tiny holes 2" up from the bottom to create a reservoir. My plan is to fill a 2x2 tent with these 2liters. Next week I flip to 12/12. Plants are barely 6-7".
Likes
9
Share
Likes
10
Share
Coming back strong.. flipped the light schedule on 8/6 and changed the formula in the RES for transition. Plucked some big fans off that were blocking lowers. Will be stripping all fans in two days, and a full strip 19 days after. Going in tonight and cutting some lower BS off so it can focus it's energy elsewhere. I should have vegged longer so I can reach that 1/2lb goal. The tent is nowhere near full, so I doubt I'll hit it this time. Will be saving a cut from this pheno to run again in the future. -Flower day 2 she's looking real happy this morning. has been drinking quite a bit and eating as well. was on a 2-2-2 formula, now on a 2-2-3 as of this mornings top off. the main stem is nearly an inch in diameter and growing holy fuck. will be stripping the big fans off tomorrow, and trimming some lower shit off. will have before/after pics F Day6 just noticed my nutrients changed from GHE to something else?? TF? General hydroponics flora series not even listed anymore? Ah well.. RES clean/change today. Prob shoulda stripped more fans the other day, but shit happens and we learn from it right??
Likes
82
Share
Heeeere we go! Sorry for the late update! This is when I start the flush! I believe the plants are pretty much ready at this point and doing this will just improve the final product! Doing this took me a good chunk of time, mostly because I didn't know exactly how much of water I was going to need (it was a loooot 😫) and how hard/tiring it was to pH it as well. In the end my calculations were off, as I needed far more water than what I had (lol) so I didn't manage to do a full flush... but I still managed to lower the amount of salts and residues to a "decent" level (around 850 to 1500 ppm). I also used flawless finish so I suppose than even when I didn't use enough water that solution alone was enough to help! Besides that the rest of the week was quite calm and relaxing. Thanks everyone for reading! 😍
Likes
2
Share
First seed run of 2024! Extremely excited!
Likes
26
Share
@B4niTa
Follow
Day 14 time for transplantation 🤗 first time with auto, but F1 should be resistant💪
Likes
19
Share
It was sometimes hard to understand her, and I feel like I failed a nutrition plan several times.
Likes
4
Share
@Ledros
Follow
Day 57 (2020-07-05): Feeding @ 5.8 PH. Removed a few leaves. Day 58 (2020-07-06): Noticing a few amber trichromes on the CBD Crack. Wondering if it might be time to start thinking about pre-harvest flushing. Day 59 (2020-07-07): Fed today @ 5.75 PH. Day 60 (2020-07-08): No news today. Plants are kind of on autopilot at this point. Day 61 (2020-07-09): Waiting to feed until tomorrow. Day 62 (2020-07-10): Fed today @ 5.6 PH Day 63 (2020-07-11): Leaves on both plants look pretty rough at this stage, but buds are looking nice all around! Guessing 1-2 weeks left on the CBD. Will probably start flushing sometime next week. G14 seems to be running behind at least a week.
Likes
2
Share
Likes
1
Share
Things are pretty easy breezy, since we are keeping it simple! The odd-looking leaf growth is evening out with new growth. The conditions of the environment are pretty ideal, with lots of nutrients in the soil and a little Root Juice to kick off the early vegetative phase. VPD is at 0.57 kPa across the board, and the lamp is hitting with 500 PPFD, while the temperature is at 27 degrees Celsius when the lamp is on and 20 degrees when the lights are off. I do run the lamp at nighttime to avoid high temperature peaks during the daytime in the simplest of ways.
Likes
47
Share
Good yield, bad rot. Overall satisfied with outcome but would not grow outdoors again. Too much rain is a problem with this strain.
Likes
6
Share
Just fine. Lots of growth. Started to think we vegged for too long and decided to go into flower for week 8. Watering every two to three days at PH of 6 and once a week with a tea.
Likes
6
Share
will edit this text, the page closes all the time because of lack of the memory or something, so im saving it all the time
Likes
144
Share
@DevilsBud
Follow
New week for the 7 strain 11 plants grow Everything is going great some little things here and there but nothing to be worrying about so i am happy how it goes one plant had balls and couple have some droopy leaves on them but have feeling my temp is way to low in darkness 16/3/22 I always show the good the bad and the ugly made couple mistakes wiles training but luckily these plants are so strong give some support and the branch that broke will fixes here self 💪🏻 Will be updating Tru the week And remember just grow weed and stop growing bullyish behavior visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter
Likes
10
Share
ROYAL QUEEN CBG AUTO ROYAL QUEEN SEEDS Week #9 Veg Week #4 Flower This week she's looking good buds are getting big she's a plant that looks wild her white hairs in every direction with her lime green leaves!! Stay Growing!! ROYAL QUEEN CBG AUTO