Likes
Comments
Share
The first week of veg. Exciting stuff! Love seeing the first true leaves and the stretch for more light. Turning to the power to give more juice Everything has been transplanted. Once they recover in a few days will be adding a second light. 3 more weeks of veg and then flip
Likes
30
Share
Leaves are fading, buds looking fat. Just plain water and occasional ice. I will never be a doctor, haha. Checking for tric color is a HASSLE. On the positive side I found some areas with lots of amber trics and others with only a few. The last week of Flower is official over I put the plants in darkness then time for chop. I have decided that after the chop I will hang the whole plant up to dry. Kinda funny, my second grow will harvest before my first. Thanks for looking. Cheers!
Likes
18
Share
@Hashy
Follow
Week 8 Light cycle=12/12 Light Power=180w Extractor controller settings High temp= 24c Low temp= c Temp step=0c High Rh= 50% Low Rh= % Rh step=0% Speed max=10 Speed min=1 Smart controller settings (during lights on). Lights on=10.01-21.59 Radiator on= below 22.0c Radiator off= above 23.0c Dehumidifier on= not in use Dehumidifier off= not in use Smart controller settings (during lights off). Lights off=22.00-10.00 Radiator on= below 18c Radiator off= above 19c Dehumidifier on= not in use Dehumidifier off= not in use Fri 9/2/24 #3 (Day 50)(Day 12 flower) 📋 H=59cm D=38cm DLI=39.0 Sat 10/2/24 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= automatic Feed=bloom nutes. Neutralise=0.1ml/L Silicon=1.0ml/L Calmag=1.0ml/L Terra Bloom=4.0ml/L Sumo Boost=1.5ml/L Roots=0.2ml/L Easy Ph down=0.115ml/L Ec=1.9 PH=6.3/6.5 Time start=12.00pm Finish time=13.45pm (11×5 minute runs with 5 minute gaps) Total flow rate=190ml/min Flow rate per plant=47ml/min. Total volume made=13L(13.5L) Total volume left=3L Total volume used=10.5L Volume per plant=2.6L (Est) Runoff. Total runoff=1.0L Ec=2.3 PH=6.0/6.2 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 #3 (Day 51)(Day 13 flower) 📋 H=59cm D=38cm DLI=39.0 Raised light to maximum height. 180w H=59cm D=46cm DLI=33.0 She reminds me of pineapple express from the way she is forming. Sun 11/2/24 #3 (Day 52)(Day 14 flower) 📋 defoliation on some lowers. Mon 12/2/24 #3 (Day 53)(Day 15 flower) 📋 H=62cm D=43cm DLI=35.5 Tue 13/2/24 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= automatic Feed=water Neutralise=0.1ml/L Roots=0.2ml/L Easy Ph down=0.02ml/L to much Ec=0.2 PH=5.3/5.7 Ec=0.2 PH=6.1/6.2 after 3L top up. Time start=12.00pm Finish time=13.45pm (11×5 minute runs with 5 minute gaps) Total flow rate=190ml/min Flow rate per plant=47ml/min. Total volume made=13L(16L) Total volume left=6.L Total volume used=10.L Volume per plant=2.5L (Est) Runoff. Total runoff=1.2L Ec=1.95 PH=6.1/6.3 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 #3 (Day 54)(Day 16 flower) 📋 Wed 14/2/24 #3 (Day 55)(Day 17 flower) 📋 H=67cm D=38cm DLI=41.0 Thur 15/2/24 #3 (Day 56)(Day 18 flower) 📋 H=67cm D=38cm DLI=41.0 small defoliation. She is suffering from the light distance being to big. I need to raise her quite a lot more to get a level canopy. Other then that she is doing fine. Back soon Take it easy.
Likes
13
Share
Bestva Quantum Board LM301B / Mr Hide seeds Semana 8 desde germinación Semana 4 de floración En 6 plantas tengo 3 tiempos diferentes. Dos empezaron a engordar de forma veloz y se les ha aplicado PK durante la semana. Dos están un poco más retrasadas, tal vez el equivalente a una semana. Hoy se empezará con PK para ellas. Dos están aún más atrás. Se ven sanas. Buenos humos
Likes
4
Share
Switched the autoflowers to another tent to give them 300 watts of led everything is growing fine
Likes
23
Share
@elementhc
Follow
3 autos are getting cut this week probably the last watering today. The other 4 are a few weeks behind. The big Photos are straight monsters Ethos genetics are amazing 👏. They are in week 2 since flip. The small photos are around week 5 or 6 veg they just got put under their own light for the first time SF7000 doing 50% at about 22" just to see how they react to the new light. They were also translated and topped yesterday.
Likes
12
Share
Week 3 flowering for the Oreoz from super sativa seeds club All seems to go well, some defoliation to keep these bud sites in the light and for the rest we continue with just water using biotabs, we do adjust the water to around 6.5 PH Basically the rest of maintenance is done, we will just let her go until end of life, im soon adding the first PK booster tea
Likes
12
Share
@Zer0xKira
Follow
Growing well . It is slightly bigger than the cinderella jack I am growing in soil in the same tent. It's definitley growing faster. I am seeing a calcium deficiency that I missed earlier on . I ordered some cal mag . I am expecting a full recovery. Also I had to add a bit of great white mycorhizzae to the mix because I was seeing alot of brown spots on my roots. It is starting to clear up. I also bought a better air stone to increase oxygen levels
Likes
36
Share
Once again, I welcome you back to my summer grow🙂💚 Still adding more bloom and PK boost to the nutrients mix and also bumping up the light a bit 😎🤙🏻 I started to add UV/IR for one hour a day, mainly before lights go out 🙂 Happy growing y’all 💚 ------------------------------------------------------------------------------------------------------- SpectrumX LED🔥 @medicgrow 880 Watt⚡️ 2x UV/IR LED panels 💥 2.7 μmol/J🔥 Full Spectrum V1,F1,VS,FS🌈 Display with PPFD & Live spectrum Light measurement: Apogee MQ-610 & Apogee DLI-600. Fertiliser: Organics Nutrients https://www.organicsnutrients.com/en/ Green Buzz Nutrients Discount Code: GD42025 Grants 25% with a minimum Order value at 75 Euro. https://greenbuzzliquids.com/en/shop/
Likes
8
Share
@4F1M6
Follow
Got a breeding project underway to make a few crosses with my master kush male. Its very nice branch structre, stocky stature, and tight internodal spacing will definitely attribute to some sexy figured ladies. Plus it has an enormously skunky stem rub, and his foliage Danks pretty good as well. I will be creating Fireman's Fruit, Mk-6ix, and Oozaru Kush. Than I will make new diaries phenohunting my new crosses. Also will working out the new genetic lines. So I will make diaries for every new generation of offspring. Definitely gunna be a fun little project. Can't wait to get to some beans! Until next update. Happy growing and stay lit fam. UPDATE*** 3 more cuts enter the breeding chambers. With them I will be creating... Master Zkittlez, Mind Melt, and Lunar Landing. Can't wait to get to work on the new lines. Until next update. Happy growing and stay lit fam.
Likes
11
Share
@EnMa420
Follow
So it was realy fun growing this plant, i made a couple mistakes with LST and by choosing not filling up the pot all the way. This is why the branches where too close to eachother. I will edit this post with taste and high next week.
Likes
198
Share
@DevilsBud
Follow
FLOWERING STARTS In the the new marshydro set-up 120x120x200 4'x'4 FC-4800 lamp Pubes are showing on all of them happy days in the absolutely amazing marshydro tent 👌🏻💯👌🏻 and no balls in the room yet so that's good at least i know that first grow i had issues with hight but with my 120x120x200 that not going to be end problem so stretch like ya never stretch before 💪🏻 i am prepared now lol the FC-4800 is a beast and still tweaking hight dimmer don't want to burn them but also want to utilize the lamp as much as I can but will get under control 🤘🏻😎🤘🏻 1/11/21 Did some last defoliation and spread the plants out bit Tru the tent got lamp dialed in dimmer around 55% and hight around 45cm above the plants and every week will bump up the dimmer with 5% they are looking very good healthy and i am very proud of the results so far gave the proper nutrients and the normal watering in between everything cool in the hood Will be updated soon happy growings Growmies visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter
Likes
4
Share
Plants are filling out nicely will flip in 10-14 days
Likes
7
Share
@ShotoCann
Follow
Sorry it took so long for an update. I got married in the meantime and went on a honeymoon. Before I went though I took the plants down and had a friend take care of the drying and curing. It looks like I got 2 pheno's. One is has more red hairs and is a bit more skunky and peppery. The other has bit more sativa like bud forming and smells a bitt gassy in addition to the tangieness. The yield is also definitely not disappointing. Plant 1: 76gr Plant 2: 68gr Plant 3: 65gr Total:209gr I am happy with that. Especially since it's my first LED grow.
Likes
14
Share