Ciao ragazzi e bentornati qui con me e il diario Limonoso.🍋😉 Anche con queste sorelle siamo quasi arrivati, manca davvero poco, penso una decina di giorni. Giusto il tempo per far diventare i pistilli belli arancioni.👊 Da domani smetterò con i nuts per pulire le radici dai forti fertilizzanti.👍 Eh niente ragazzi! Purtroppo sono andato in vacanza e ho delegato il lavoro al mio socio, quindi ho poche novità per voi.🤦‍♂️ Grazie a tutti per aver guardato e restate sintonizzati per nuovi aggiornamenti. 🙏 Buona settimana e felice crescita 🌱 🌱 🌱

• FLOWERING WEEK #2 ✎ ANOTHER HEAVY LST

Well fuck me sideways, SBG may have been right. A noticeably large cola exists between these 2 test plants, and it looks to belong to non defo. ... I may have fucked up, but lets wait to find out!!!! Thanks for looking

approaching 3 weeks from when clones where taken there building up great done bit a defoilating super cropping and topping a newby to these techniques but seem to be doing well can see the increase in nutrient has really got them growing now

Bueno, empezamos por el final familia. Gorilla girl, me parece una cepa BRU-TAL , ya partiendo de esa base, mi error, creo que e cometido , es poner estos ejemplares en macetas de 5L, que tonto... mínimo recomendado 7L y a ser posible 11L Otro error fue no dejarlas una semana más. pero, escasez. (intentaremos curarla un par de semanas). Cepa con flores muy compactas, hay bastante separación entre nudos pero compensa las flores de verdad. Sabor muy dulzón a mi me recuerda a melón , es un pepino recomendado para amantes de la hierba que llevan tiempo en esto, un colocón muy fuerte, ahora mismo estoy bajo los efectos de esta vaina, aseguro que con cada frase, leo varias veces y detenidamente por que válgame.

Since this is my first time around, before getting started, I took a week to finetune my freshly built setup. Took me a couple of days to get the parameters in order, mostly battling high humidity due to wet soil straight out of the bags. (Plagron Promix) At the beginning of this week i first put the pots in the tent (actually a 4 by 5) and started feeding the soil the myco alraidy. Figured it could be benificial. Them being autoflowers, I planted the seeds in the original pots and covered them with solocups. Watering mostly around the solocups multiple time per day wit a pressure dispenser. I took about 72 hours for the seeds to start germinating. Kept Par levels on the high side (350 and up day by day to 480 in the last days of week 1, probably less to the plants themselves because of the solo cups) thinking the strong genetics could handle it. All the while checking for signs of to much of it. That didn't occur, even after taking of the cups a day or two after germination. Nice as I am, I did not take any pictures, this week! But! some footage from the room where it all happens :)

The second week of vegetation is over and watching the plant grow is a rewarding experience for me. Now that the plant is well-established, it is time to begin training it. This involves LST to ensure it reaches its full potential in this case. I look forward to discovering what this plant will become 😋😊

Nothing has realy happened since I cropped the royal cream....It is just hanging. Decided to do a dry trim so that it takes longer to dry due to the fact I am having to just use my cupboard so the humidity is pretty low. Leaving the leaves on just means It takes longer to dry. I am going to crop the Easy Bud in the next few days when the mood takes me. I had 4 left over R. Cream seeds left over because I informed them that. bought 2x 3 packs and only 2 seeds germinated so they sent me another packet which is REALLY good of them and the sort of thing that means I would definitely use Royal Queen Seeds again, for sure! The trich's are basically all cloudy with a few clear. I cant see any amber but my loupe is a ridiculously cheap Chinese piece of crap. I will invest in a microscope camera so I can hook it up to my phone or MacBook. It is way too hard to keep everything steady In order to see what is popping with my sexy trichomes. Obviously feeding has stopped for about a week now. I forgot to change it In the diary last week so will try and correct that now.. I know it is not strictly relevant but I had to go somewhere earlier and took a video because I was able o walk in the middle of a main road in my town which Is usually packed full of cars, especially at the time I was walking on it. It is a time that makes me even more glad I grow my own. I really need to buy the bigger tent, lights and re-locate to the bigger, more subtle cupboard (not the one i am using to dry my weed in the video I posted) and then I will be able to effectively ScrOG the 2 or 3 plants I have, in order to maximise yield so I can be totally self sufficient with regards to my cannabis medicine. UPDATE - MONDAY I just realised I have made a proper idiots mistake an missed out on some much tastier buds because of it. OK, so I got paid today, so I though I would treat myself to some of them cheap COB chips I used for my last grow because hey were super cheap and actually really effective considering the price. I ordered 2x 100w 6000k veg spectrum chips with a solderless connection for my power. I also ordered one of these heatsink + reflector. https://www.amazon.co.uk/gp/product/B01MT824NP/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 My thinking was that I have a spare heatsink here that the old citizen CLU-048 is attached to so I was going to fit one of the chips into that and the other into the heatsink and fan I bought. This hought process lead me to go ad retrieve the old citizen LED and I thought I would try it. Still didn't work, then suddenly I thought it could be a simple blown fuse so I changed it aaaannnnd.....still doesn't work. doh! I started to remove the COB holder and COB from the heatsink (it was just glued to it using thermal compound) and when I laid it on the table I decided to test the driver without the COB holder on the tiny off chance it might work...nope I then realised maybe I got the + and - the wrong way round, tried again and boom works perfectly. The connection from the holder to the cob had bent slightly off contact. Really annoying that this whole time I could have doubled my photons to the plant, however, really nice that I don't have to spend a load more money on lighting in order to upgrade into the new room. So all I have to do now is spend money on a pre-drilled heatsink and a new metal COB holder for the citizen.

Аромат

1st week of flush is done the expected results is the fade, this ladies are coming to the end of their cycle. one more week of just water, I will flush again on 2/1 then let them dry out in the pots for the last week 13. When they are dry I will black out for 48hrs to increase the Trichomes and then the chop. they look to have slowed down in growth from the time-lapse I don't think they will get significantly bigger than they are now. so I hope the flush will help with the smoothness and curing and white ash as a result.

December 15, day 1, seedling healthy with taproot growing 1.5 inches out of rapid rooter. Transplanted to seedling container. Under 25w Sansi LED untill it is ready for veg lighting. 5 gallon final container prepped with buffered coco/perlite. December 18, day 4. Seedling has had some issues with transpiration, probably due to not enough flushing of the coco. The result is damage to the tips/necrosis of the first true leaves. I flushed the medium and the seedling seems to be recovering. It is sending out more roots and growing at a steady pace. I also moved the seedling into its final pot. This feels a little premature, but it was over growing it's humidity dome. In the final pot it can be covered by clear plastic to maintain humidity. December 19, day 5, new growth is healthy which I am happy about. I will cross my fingers that my quick adjustments fixed the transpiration issues. I am hoping to get it huge and have it trained across the whole 2x4 tent, and it needs to avoid getting stunted for that to happen. 💪🌱 December 20, day 6, I had a bit of a scare when I accidentally knocked my humidity meter and it fell right onto the seedling! The poor thing was knocked right over. It seems to be fine, just leaning a little bit over which will hopefully correct itself in the next few days. December 21, day 7, healthy growing 🌱👍

Been SUPER busy and have had a hard time keeping up with everything. The video was from a few days ago, I don't think I was watering enough. Shes growing nonetheless, and ill be starting liquid nutes this week

Noticed thst the temperature inside the tent was not dropping as expected. Especially after the colder night temperature ive been seeing. Also the upper canopy has fox tailed. I was on vacation for 2 weeks before noticing this. So hopefully there csn be some recovery on the denseness of the nugs.

Start of week 14 (hopefully the last) Fed with water 5/15/25 Fed with nutrients: 5/17/25

Week two and very healthy

NEW RES! -- DEC 4 - DAY 31 - So the flowers are beautiful and sprouted and looking amazing going to give her a new res today- NEW RES! DEC 4 - DAY 31 - HEAVY LST AND NEW RES The goal is to get her to stretch so that I can LST the longer, more flexible branches. I will then put her into a 5 gallon from a 3 so that she is closer to the light. I will LST the entire plant pretty hard, and since she's topped already, it's a matter of pure growth now. I am experimenting with more MICRO and higher PPM (775) at 1.9 EC to see what happens. No defoliation since I don't want to stunt her, just a refresh of her LST to reinforce the inside buds getting light. It should be great growth now.

salut a tous bonne semaine ça gonfle la résine commence a apparaitre légère décoloration des feuilles inférieures sinon au top vivement la semaine prochaine bon jardinage a tous peace