Growace.com air cube discount code NINJABUDS ELUFAH.com and amazon Elufah products discount code NINJABUDS I finally choose witch 6 plants I am going to keep and I transplanted them into the air cubes Truffle Jordan was a hard one to choose both of the seedlings were both healthy and strong Also I set up the grow pro’s under canopy lights getting them ready for when the plants are ready for those to kick on

Getting ready very stinky and sticky plant. Large and side chains are so heavy I needed to tie to.not to bend. Harvest in 2 weeks she is being flushed. ;)

Week 1 January - 7 january 6/1 feeding day

Soon flipping to 12/12

Kinda a rough week, everyone. I’ve been battling the flu all week and my energy is zapped. So firstly I had been growing increasingly annoyed of leaf clawing. I addressed overwatering and started only watering every 4-5 days and the girls responded well. I researched defoliation as much as I could and gave it a go because the plants weren’t getting optimal light. Might’ve overdone it, I’m not sure. Then came lowering the screens to begin scrogging. I’ve read probably every forum and article and looked at dozens of diaries; but it feels like when I’m tying branches to the screen it’s just stacking them on other leaves and blocking more light. I hate my LED, it’s probably only good for one plant. But today one of the bulbs went out, brand new light. I decided to buy a 315w CMH Light should be here next week. Live and learn. Should have done a single plant grow. It’s a new week though it will all work out. 🍁

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 ATTENTION GROWERS!!!! BEWARE OF A SCAM COMPANY.... GREEN BUZZ LIQUIDS WILL SAY THEY WILL SEND FREE FERTILIZER BUT THEY MAKE YOU PAY THE SHIPPING WITHOUT TELLING YOU AND THE AVERAGE SHIPPING PRICE IS $100. AND THEY WILL GET ANGRY AND RUDE. THEY TOLD ME TO SUCK IT UP AND BITE THE APPLE🤬🤬 AND THEY TELL ME THIS RUDE CRAP AFTER THEY TOLD ME I NEVER EVER HAVE TO PAY OR WORRY ABOUT FERTILIZER EVER AGAIN... BS YOU RUDE, LYING GARBAGE COMPANY 🗑️ POOR QUALITY NUTRIENTS WITH VERY POOR AND RUDE CUSTOMER SERVICE AND NOT WORTH THE PRICE TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

I wasn't here this week then it's a friend who watered plant. I didn t think about temperature so i turn off heating so temperature was low.

Lady Runtz has moved into a 11 L pot with Plagron Batmix. With the next watering we gonna use Plagron Power Roots, Purezym, and Sugar Royal.

Week 7 here we go They starting to show some colors as they are getting frostier and frostier 😇 tricomes still all very young and clear but getting there 🤫😈 Day 46 update : selective defoliation, they needed more air and light going around. It smells like candy’s store mixed with pine trees and the minty fruit salad that as all that exotic and exquisite aroma in it I’m loving this round and loving all the new learning that came with it 🙏❤️😈🤫🤓😇 As for the geek department 🤓 I’m currently: - VPD - 1.03 kPa -PPFD - 725.38 umol/s/m2 -DLI - 28.71 Loving this LED Tec 😍 Girls: 1-BlueBerry 2-Alaskan Purple 3-Poyote Gorilla 4-Hindu Kush 5-Whitw Mango 6-Super Glue 7-Badazz Cookies 8-S.A.D. tent -8x8 / 2.4x2.4 but i'm only using 1/2 so 4x4 / 1.2x1.2 Led - Lumatek 465w Compact Pro at 75% All i Grow is medicine for myself, Stay safe, stay tuned and B Happy Peace out D

English below Nach einem stressigen Wochenende wollte ich eigentlich gestern noch präventiv gegen Schädlinge sprühen aber hatte Vergessen nachzukaufen also muss dass noch bis morgen warten. Ansonsten hat sich die Pflanze größtenteils von der Unterdüngung während dem Urlaub erholt, die neuen Triebe haben wieder schön grüne Stängel. Ende der Woche steht dann auch die Entlaubung an. Ich bin gespannt wie es weiter geht. ------+ After a stressful weekend, I actually wanted to do a preventive pest spray yesterday, but I forgot to restock — so that’ll have to wait until tomorrow. Other than that, the plant has mostly recovered from the underfeeding during my vacation. The new shoots now have nice, green stems again. Defoliation is planned for the end of the week, and I’m excited to see how things develop from here. After a busy weekend

Pflanzen sind einfach super 👍 Sensi Seeds power 💪

21.09.Update – Day 54 • We’re now deep into flowering, and unfortunately the thrips problem has not improved. • On the contrary, the population has completely taken over and has had a strong negative influence on this run. ⸻ Pest Situation • Despite thorough cleaning before the run and multiple measures during the grow (Neem, Nematodes, Predatory Mites), the thrips kept spreading and finally took control. • The infestation has weakened the plants noticeably, reducing their potential and overall performance. • For the next cycle, I will need to take even stricter preventive steps to avoid a repeat of this issue. ⸻ Plant & Bud Development • Even though the plants were heavily affected, the buds themselves are still relatively solid: • They are compact, firm, and nicely structured. • The terpene profile is very appealing, with a rich and delicious aroma. • Yield will certainly be lower than expected, but there is still a chance for a satisfying end product. ⸻ Notes & Outlook • This run shows how devastating thrips pressure can be, even under careful preparation. • Nevertheless, the buds are giving hope for a decent harvest in terms of quality and flavor. • The plan now is to finish strong, harvest what can be saved, and then prepare carefully for a fresh, hopefully pest-free start. ⸻ 🌱 Day 54 – Thrips have dominated the run, but compact buds and great terps keep the outlook positive for harvest quality.

Big stretch this week , things are looking good all in all. Just added another second layer of trellis today. A small bit of defoliating also. Was hard to find co2 today , but got it done. Will start to lower temps a bit here in next week to about 78f . Getting dry backs of about 20-25% during the night. Keeping media about 60% saturated during day via multiple small shots of nutrients. Could do much better but I will need better media censors to do that , so it is what it is for now.

Howdy folks. This week had some turbulent weather, and is really testing the resistances of this strain. The days have either been hot and humid, or raining non-stop. Not exactly what you want late flower, but you get what you get with outdoors! Spotted a few swollen calyxes so there must be pollen floating around. My neighbour just discovered a male plant over his side of the fence. Crossing my fingers that there were no open pollen sacks before he pulled it. Apparently the pods were tiny and hadn't opened yet but I never got to see and verify that. But... this is outdoors, and the area is very outdoorsy/foresty - so there's bound to be loads of stray males in the area. Hoping that these don't turn into seed factories 🤞 What's the latest a flowering plant can get pollinated? Are you ever in the "safe zone"?

6/24: Things are looking good! Haven't really changed much, but I did bring the light a little closer to the plant and I brought humidity down to 70%. The bud sites are growing very quickly. Hoping to be able to start some LST by the end of the week. 6/26: Loving the growth still! Keeping things as is still, as I am liking the results so far and don't think she would benefit from any adjustments. The 4th node has dropped nicely and 5th is coming along fast! Also, I planted four mystery seeds I received from a friend and three of the four popped today! We plan on trying our hand at a little outdoor growing with these. Nothing like a little experimenting, right? 6/29: All is looking well. I did remove the lowermost node, as well as start some LST on the second node. LST is something new to me an an opportunity i was not afforded with the slow growth and early flower of my last grow. I'm excited to see what different it will make. I plan to do the same on the 3rd node as well in the coming week. It's been fun watching this plant grow! WEEK 3 AVG TEMP: 73.2F WEEK 3 AVG HUMIDITY: 66.8%

See last week for more information.

The OG Kush made it through her final week of flower...56 days in total. Super sticky and smells like a mix of limonene and pinene and a hint of sweetness on the back end. I'm definitely happy I have a couple more of these beans. Super smooth run, chunky resinous buds. Thank you to everyone that visited to check my first Grow Diary out. You made it a really cool experience ✌️☺️. https://www.instagram.com/ao.grows?igsh=MXR1dWZxMWhlNnF6bA== Check out my Instagram for clips I made for this grow.

Dnes 21.04. poprvé 12/12