Likes
20
Share
Day 32: It's the 5th week already! The soil plant is starting to flower as well. The roots of the hydro plant are healthy again, although the plant is of course still very small. I removed a few leaves that overshadowed some of the lower flowers/nodes. Day 34: The results of the LST really start to show. A number of flowers begin to grow. The plant takes more and more horizontal space. I redid the LST today to move the buds even further away from each other Day 37: A lot of growth / stretching went on this week. For the soil plant I redid the LST again today, and the whole pot is almost covered when it was only half of it a couple of days ago. The hydro plant has quite a bushy top now.
Likes
22
Share
@NanoLeaf
Follow
End of Week 16 (9th week of flower) Final week of flower. Turned the lights wattage down at the end of this week to 400W to mimmic the sun moving further away from the earth during Autumn and Winter seasons. This also creates an overall cooler temperature signalling to the ladies that the end is in sight. This also protects the trichomes and ensures they don't get damaged and also dropped the The ladies are fading more and more into their vibrant autumn shades. With hues of pink and purple that makes me so excited! Feeding just PH correct water until harvest, which is around the corner. We are currently on day 63 of flower and checked the trichomes - just a few specs of amber and the cloudy trichomes are more prominent although there are still some clear ones. We will push to harvest within the next couple of days, around day 67-69 Pest Report: None Smell Report: Staaaaanky!
Likes
40
Share
@Coopmc
Follow
Being picky decided to keep only the one that was exceptional!
Likes
23
Share
Likes
15
Share
Candy grows slowly because of this weather here in South germany :-( but we will see, it seems it will be better in few days
Likes
28
Share
Hi people. The plant is in that phase when it gains all the buds and mass as quickly as possible. they are growing every day and it is noticeable.
Likes
2
Share
Buongiorno le piante sembrano stare bene sono alla seconda settimana di veg. Per il momento sto fertilizzando solo una volta a settimana con il woodoojuice b52 Bud Candy ,e il tripac Advance pH perfect. Nn sto riscontrando problemi gravi per il momento sperando di avere pianto e forti ci aggiorniamo la prossima settimana. ☮️💚💜🏴‍☠️🆓🇵🇸🇵🇸🆓
Likes
6
Share
@Tezza2
Follow
The purple lemonade is getting some beautiful sticky fat dank buds and the gorilla cookies is flowering nicely the node spacing is super close so i will be looking at some super dence fat sticky buds the smell is amazing i cant wait to have a joint with the two strains combined in it .
Likes
9
Share
@AustinRon
Follow
14 Week 7 Flower Week Ambassador Cartwright Ambassador Cartwright by IRIE Genetics Transition to Flower Afterglow X Arise (Clementine X Arise) X Arise ((Tangie X Lemon Skunk) X Arise) X Arise ______________________________________ Start of Week: Saturday 8 October AC3Q 85:F:7:1 to Friday 14 October 2022 AC3Q 91:F:7:7 Summary: Plant HeightBeginningOfWeek: [ TBD, in] Plant HeightEndOfWeek: [ TBF in] Temp: 74.8 RH: 70.7 VPD: 0.88 kPa # need to get into the 0.9 -> 1.1 Early Flower LightSchedule: 12/12 amt: [ 1500, ml] # period: [ 360, min] frequency: [1, day] times: { first: 2100, second: 0300 } # Auto Only!!! Otherwise 1.3 @ 2100 Environment: EC Targets: # rel. | abs (rel + source) EClatebloom: [ 1.5, 1.7] [ 1.8, 2.0] ECripen: [ 0.8, 1.1] [ 1.1, 1.4] ECflush: [ 0.0, 0.2] NOTE: Aiming at 11 - 12 Week Finishing: Continuing Rooted Leaf Medium Feed WEEK 5 Through Week 9
Begin RL Week 6 chart on AC Flower Week 10! (Taper Weeks 10, 11, 12) Seedling Early Veg Late Veg Early Bloom Late Bloom Ripen Flush 400* – 500 1100 – 1400 1200 – 1500 1100 – 1400 1300 – 1600 800 - 1100 0 - 200 Fertigation Daily: - {pid: 4, amt: 1500 ml, ec: 2.0, pHRange: [ 5.5, 6.5], time: 2130} - {pid: 7, amt: 1500 ml, ec: 2.0, pHRange: [ 5.5, 6.5], time: 2130} FertigationtheRootedLeafFullRatios: # Flower Week 4, Fertigation Extend Week 6 -> 9, 7 -> 10, 8 -> 11 Primer A: [ 7.5] Primer B: [ 7.5] CalMag Fuel: [ 4.5] Silica Skin: [ 3] Peak Bloom [ 4.5] Resin Bloom [ 3] PhotosynthesisPlus: [ 6, ml] BioAgFullPower: [ 20, ml] _____ Saturday 08 October 2022 AC3Q 85:F:7:1 Saturday 09 October 2022 AC3Q 86:F:7:2 Saturday 10 October 2022 AC3Q 87:F:7:3 Saturday 11 October 2022 AC3Q 88:F:7:4 Saturday 12 October 2022 AC3Q 89:F:7:5 Saturday 13 October 2022 AC3Q 90:F:7:6 Saturday 14 October 2022 AC3Q 91:F:7:7
Likes
69
Share
@Natrona
Follow
Week 7 7/25-31 AUTO AFGHAN BULLET 7/25 2gal TPS1 30ml Cal mag 5ml Recharge 5ml Kelp 2 tbsp PH 6.3 PPM 1010 Temp 73 7/28 2gal TPS1 45ml Cal mag 5ml Recharge 5ml Kelp 80ml PH 5.7 PPM 1210 Temp 72 Auto bullet bounced back nicely from last week's defoliation. Bullet’s opening her structure to open the lower inner branches made her really wide,. Thank you @DivineSeeds for the opportunity to participate in not only the photo contest but also the auto grow contest. Thanks for the visits, likes and comments; I appreciate all the plant love💚. Have fun & love what you grow 💚 Sending you good vibes of love, light, and healing 💫 💫Natrona 💫
Likes
23
Share
Ich kann es nicht beschreiben. Sie ist ein Traum! Wächst und wächst und sieht sehr gesund aus.🤩❤️
Likes
26
Share
Buongiorno amici! La stagione indoor 2023/24, è partita un po in ritardo alla CampaCavallo per via delle alte temperature autunnali.... Ma ora siamo pronti per ripartire alla garnde! Grazie alla collaborazione tra Zamnesia e Plagron, abbiamo l'opportunità di partecipare al concorso POWER BUDS Vedremo come si comporterà la Monster Zkittlez 👹🍬 State sintonizzati per gli aggiornamenti! E grazie per i Like👍🏽
Likes
5
Share
Plant had a major jump in growth over the weekend and also started to flower
Likes
55
Share
Constructive interference is the phenomenon where two waves combine to form a new wave with a larger amplitude. This occurs when the peaks of one wave align with the peaks of another, and troughs align with troughs, causing their amplitudes to add together. For example, if two identical waves meet, their amplitudes will combine to produce a resultant wave with double the original amplitude. Constructive interference is a fundamental phenomenon based on the universal laws of nature, specifically the principle of superposition. 👋Top is a clean cut, no confusion for the plant, road ahead is clear, by completely removing the main growth tip, the auxin source is eliminated. The plant permanently halts vertical growth from that main stem and immediately sends its energy and hormones to the two new, evenly spaced branches just below the cut. Fimming slightly different because a small tuft of the top growth is left behind, the auxin disruption is temporary and less severe. The plant recovers more quickly and sends its energy to multiple surrounding growth points, often creating four or more new shoots from the same spot. It will eventually regain some vertical dominance after a few weeks if left to its own devices, but with a little more LST, bending the apex to the same height as the rest of the internodes, this shatters dominance, hopefully creating around 8-9 main shoots growing at equal height once recovered and grown out. Reduced environmental intensity for now and let her focus on dealing with this new stress for a week or two. When H+ ions are added to soil, the first nutrient displaced from exchange sites is typically aluminum (Al3+), if it's present, followed by calcium (Ca2+), magnesium (Mg2+), and potassium (K+), because aluminum and these base cations have different binding strengths. The order of displacement depends on the lyotropic series, where ions with a higher positive charge and those with weaker binding strengths are displaced first. The specific order of nutrient displacement is determined by the lyotropic series, which ranks the strength with which cations are adsorbed by soil particles: Al3+: Most strongly adsorbed, so if present, it will be displaced by H+ ions, leading to increased solubility of aluminum and potential plant toxicity. Ca2+: Displaced next, as it is more strongly bound than Mg2+ or K+ but less than Al3+. Mg2+ and K+: Displaced after Ca2+. The displaced nutrients can be lost from the root zone through leaching, becoming unavailable to plants. As H+ ions increase, the proportion of acid cations (H+ and Al3+) on the exchange sites increases, while base cations (Ca2+, Mg2+, K+) decrease, resulting in a lower soil pH. The amount of photosynthesis (water splitting) directly determines the availability of H+ ions (protons) in a plant. 90% of water is for cooling of photosynthetic apparatus the other 10% is split for its H+ among others things. Carbon sugars, like glucose, do oxidize in soil through a process primarily driven by microorganisms, which break down these sugars for energy. This oxidation converts the sugars into carbon dioxide (CO2) through cellular respiration, a key part of the soil carbon cycle, though some carbon may also be incorporated into soil organic matter. The rate and extent of sugar oxidation depend on factors like oxygen availability, the presence of Fe oxides, and soil redox conditions, which can all influence the process. My understanding of why we flush. Just plain water, what does it do? Strips the medium of salts and nutrients making it empty. What does that do? Triggers nutrient recycling within the plant. What's nutrient recycling? It is a natural part of plant senescence, which can be triggered once you know the switches. A 24:1 carbon-to-nitrogen ratio will also trigger. Why won't it trigger autophagy for me? Nitrogen needs to be gone, gone, gone almost. Ammoniacal (organic) nitrogen takes 4-5 times more water to separate it from soil particles than nitrates so what happens is most people jist flush the nitrates, leave all the ammoniacal in there and this prevents autophagy initiating. Nitrogen decays differently depending on its form during the dry. Ammoniacal nitrogen will oxidize in the air, leaving no trace. But nitrates do no decay and turn volatile and smelly and remain trapped until smoked, no matter how long you cure it does not oxidize. This is why you need to trigger it and begin the denitrification process prior to harvest to get rid of all the nitrates. Otherwise, you will smoke it. Flush till autophagy begins, just make sure you add no nitrogen afterwards. Micronutrients for trichomes. Don't leave the medium empty for 2 weeks, that does nothing but reduce yield 10%ish. Trichomes are another thing. Trichomes themselves are not directly affected by flushing; rather, flushing affects the plant's nutrient uptake, which influences the development and final state of the trichomes. Trichomes are filled with antioxidants in the last weeks, which is what makes them cloudy. A lot of the processing of antioxidants requires energy and nutrients (mostly micronutrients ), so you don't want that soil empty for 2 weeks, you just want the carbon nitrogen ratio 24:1and no higher. She still wants what she needs to ripen. Processing antioxidants is energy-intensive; heat and light accelerate the rate at which THC converts to CBN. This is why you lower DLI, lower temps. By doing so, you reduce the oxidative workload caused by photosynthesis, which opens up the oxidative capacity for the production of antioxidants. THC is mostly processed at night when the plant's oxidative capacity is generally moreso "free and available" for work. Oxygen is the alchemist's "fire"
Likes
17
Share
@Wakesk8
Follow
Here we go!!! Flowering stage! Looks beautiful and at moment no issues!
Likes
21
Share
o Added a PK booster this week o Defiliated at end week 13 o 1.00 VPN o feeding twice a day
Likes
165
Share
Well growmies ive been looking forward to the MonsterMash 👻 👻 👻 She was a really nice plant to grow , she did her thing and the 👈 Buds are tight and full of frost 👈 She definitely came with the sweet and sour terps , very sweet like candy but with a skunky terpy smell 😁Couldn't of asked for better Genetics 😉 The smell coming from this girl during the entire grow was just dreamy 👈.. 😍 Would definitely recommend 👌 👉 Big thanks to all my Growmies out there in GD land 👈 Much appreciated 🙏 Thanks To MarsHydro for the TS1000 x3 www.marshydro.ca 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14👉 All Weeks NutriNPK Grow 28-14-14👉 Weeks 2 & 3 NutriNPK Bloom 8-20-30👉 Weeks 4 to 8 NutriNPK Bloom Booster 0-52-34👉 Weeks 4 & 9👌👌