🌿🌿🌿🌿🌿🤩🤩

2/5 Week 6 Did some defoliation to keep things clean She just doing so well sex is showing Leave nuets as is She has been chosen to go into the big tent first and flipped three days before the rest of her cousins. Be a few days 2/7 Into Flowering tent flipped to 12-12 nuets adjusted slightly 2/9 New pics

.

*WEEK 1 DAY 6 OF FLOWER* Flipped the light to 12/12 6days ago and started scrogging I also gave her quite a huge defol 5days after the switch for better light penetration and airflow, for the first week everday ill be checking on the canopy any tops that are growing too tall compared to others will be trained underneath the scrog net, resulting in even light penetration throughout the whole canopy giving lower buds better light and of course the main reason - keeping the plants small :) started to implement the boost additives to boost K intake and i have also added a exhale co2 bag above the canopy to hopefully boost the co2 levels and promote faster, better growth! the deficiency i mentioned in the last week of veg, is not looking to get worse or worsening hmmmm strange effected leaves have been removed and overall she looks great! i dont wanna get to ahead of myself yet! as we still have a long way to go, but for my first run as from up to know i am pretty happy with myself and the growth of plant, i see so many growers with basic and even really bad deficiencys/diseases from early growth! even throughout there whole growth cycle... yes i have noticed a few weird things throughout the cycle but nothing extreme no NPK deficiencys so i am really pleased with this run! roll on the next ;) Wish me further look guys, Lets Grow!

Gorilla Jealousy F1 is growing good. She is making good progress. I will be starting lst on her 4 branches very soon. Nothing else is really going on at this moment. Thank you Spider Farmer, and Seedsman. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 https://www.seedsman.com/?a_aid=Mrsour420. This is my affiliate link to seedsman. Thank you Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

Looking good height wise. But humidity is high at 68% and she is getting blackening / darkening of lower leaves that continue to fall off.

So, this week pretty much just buds fattening. I think there is a problem developing with either pH or phosphorus deficiency. Got a pH test pen on the way so should find out what's going on soon. Leaves staring to look a bit off, but bud growth is solid. Tested pH and it looks good at 6.9 so I'm gonna increase bloom nutes cos it could be phosphorus or magnesium.

So WHY is this auto taking so damn long to mature??? Is this normal? It's my first hydro grow, but my wife's soil grow started after mine (more than a week) + was grown in the exact same room .... but has been harvested over the past TWO weeks. Thoughts? Not much needed doing this week. Did a huge trim mid week that was posted to a mid week update in last week's diary entry. She didn't like it at first but then bounced back pretty well. I think I have a very slight touch of nutrient burn on some of the tips, but it could also be a touch dry as we're having a hard time keeping the room over 40% humidity as the outdoor temps here are stupid cold recently. Hoping to harvest in 2 weeks or so.. but could be longer. Urgh. She's a big, bountiful, heat-loving lady that's finally a under a bit of vegetative control... but apparently REALLY likes to take things slow.

Day one of flower will start tonight 11/15/22 not really any growth for the small pot the beach ball was y’all responding well I guess it’s not as restricted as far as soil wise

Well, this was a interesting first journey.... the buds finished drying today, 5 days drying, added pics and vids. Just curing to go.... ah nice buds :) Edit: i forgot to mention i went over the buds when i harvested them, and checked / removed any impurities, like gnats caught in the sticky bud.... picked em clean with tweezers... 👍 Edit: needed to air/dry out the buds abit more, and get some Boveda Humidipak for curing.... it's looking good... i'll update with some pics of trimmed, cured buds 😎 The buds turned out beautiful, pungent, pine, berry, citrusy, daytime, medical..... this has theoretical 1:1 - 21% THC, 19% CBD, so it's not going to give u a knockout high.... its medical grade 1:1 ....... side effects - happy, relaxed. haha :) I weighed it dry and came up with about 123.32g (4.35oz) ... i used abit of guesswork in the weight, not to concerned with weight, as to quality.... (that weight is with the test buds added in, +-15g.) .... you can guess the weight from the pics and vids, haha I really enjoyed growing this.... i found the website by looking up the seeds, decided to start a grow diary, it's my first grow, i made alot of mistakes and growdiaries really helped alot, joined a chat group with some other really good growers. Edit - Day 111 - added vid/pic, Been curing for a week, burp and roll em abit twice a day....... smell and taste nicer each day, 👍 Edit - Day 112 - added good vid of trimmed up test bud, beautiful ...... I hope You enjoyed the Diary..... Good Buds 😎

DAY 4 OF FLOWERING

11/12: day 35 of flower. final defoliation - just on autopilot now. These ladies should now be moving on to that last stretch of maturity. And so I did a final defoliation. The dramatic differences between all 4 of these is interesting to say the least. #4 is probably my favorite pf the group. It is so frosty compared to the other 3 and its not even close. #1 is the monster of the bunch with #3 close behind it. Both of those plants have grown monster buds considering I'm only in week 5-6. #2 is just a disappointment all together. It is small, has produced only small popcorn nugs. They all now smell very strongly of sweet lemon chemicals/fuel. The smells dramatically changed this week and im hoping it gets even more smelly. I am still very frustrated with the lack of purple. So much so that i am considering tossing all of the clones i have for these cause i dont yet see a reason to keep a mother. I was after the purple and lemon. I have lots of green lemon smelling seeds that i already know love the bud from. I am looking forward to the next week as these start to finish up.

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 REMO NUTRIENTS 👍 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

This week we are ready to bring the Pineapple Express and blue dream inside for a dark period for chopping. The sour diesel and northern lights should be ready next week. Expert haze is pre flowering and the clone is showing small roots.

Week 4 At the beginning of this week she looked rather unhappy. Think I’m gonna leave off the rain water for a bit and go back to tap. I’ve ordered calmag and bio heaven so I can’t wait for these to arrive. I also removed about 12 lower bud sites and defoliate. She’s a strong plant every morning I had to keep forcing the colas down. She loves a spraying in the mornings :D She’s drinking very well. And omg the size of the stem at this age I’ve never seen this before. Toward the end of the week she went into flower. Is this right? Happy with her so far