We introduced LST this week to get more parts of the plant to get more sunlight. We also started using a fertilizer (NPK 9-3-6) using 3ml/l.

The Strawberry Banana from canuk seeds is still the smallest girl but she is moving along she will not be getting any more toppings but once she gets a little bigger under the medic grow fold 6 then she will be going into flower

Look what happened this week!!!!!!!!!!!!!!! She grew another 33cm!!!!!!! Look at how many flower sites she has. This is going to be an awesome plant.

The first week after the flip. What I have been working on is bringing Gelato's soil pH up. Gelato was given water at 6.5 pH and the run off was measuring 5 pH (yikes.) After flushing with 3 gallons of water at 8 pH, the soil pH was still measuring 5 pH. The reaction the plant had tho after the flush was positive, which is to say, no more burning or yellowing leaf tips 5 days post flush. Sour Diesel and Do Si Dos were fed VEG nutrients at 50% strength ( 1.5 tsp Big Bloom and 1.5 tsp Grow Big.) and the pH of the liquid was 6.5. Everyone is looking good. Because it is only the first week of flower, "the stretch" is yet to be seen.

This is a regular photo seed, I'm hoping it'll be a female. If not I have some solid male genetics to cross with. 💚💜 my Blueberry strains. I have both a Blueberry & Blueberry OG in, I'm excited for both.

Las flores de la amnesia son rara, flores puntiagudas, como una mutación extraña pero formaron unas colas largas y llenas de cálices. Sin tanto olor apestoso. 17/05 se riega con 2 litros de agua + cal mag + trico+ Ec:0.8 PH:6.4 20/05 se riega con 2,5 litros de agua. De los cuales 1,5litros eran de 🌧️ lluvia. Se agregó calmag hasta llegar a EC:0.4 y se sumó agua de la canilla. + 2ml de solo-tek bloom + 0.1gr de monster bloom EC:1.7 PH6.4 23/05 se riega con 2,5 litros de agua de lluvia + cal mag hasta llegar a EC:0.4

Week 1 Day 1 - 8/12/2023 1st Water change Day! Such a special time it is when you remove the little bit of Nutes that you gave them as an appetizer and you give them their first real meal. Added 39 Gallons of Water to my system SILICA= .5mil/Gal = 19.5 = 20mil Root Drip = 1mil/Gal = 39mil Cal Mag= .25mil/Gal = 9.75 = 10mil FLoraMicro= 3.0mil/Gal = 114mil FloraGro = 2.0mil/Gal = 78mil FloraBloom = 2.0mil/Gal =78mil ORCA= .5mil/Gal = 19.5 = 20mil Week 1 Day 2 - 8/13/2023 Everything is looking good the roots are making thier way to the water and the new grow is looking nice and green. Week 1 Day 3- 8/14/2023 Everything is right on track, they are looking beautiful and in the praying postition all leaves happily lifting towards the light. Week 1 Day 4- 8/15/2023 Looking beautiful today and looked like she could use her first haircut.. gave her a TOP off. Roots are laying in the water everything is looking right on track.. Week 1 Day 5- 8/16/2023 walked in and the humidity was under 60.... ohh noooooo.. So I added 2 humidifiers to the tent and attached them to my InkBird controller which is set to 62. She had roots nicely in the water.. this grow is on!!! Week 1 Day 6- 8/17/2023 Humidity was a little low this morning, so I refilled the humidifiers. Other than that, the temp looks great, the PH looks great, the PPM looks good the plant is in the praying position and all damage from the little drowning seems to have been fixed. Happy Happy. Week 1 Day 7- 8/18/2023 Yay.. week 1 in the books, roots in the water growth has started first hair cut given and both side nodes are growing. Everything is looking good and on track.. A lot better than week one of the last grow when I had them drowning week 1. Really excited on how this grow is going to come out.

Everything was gonna be fine, But I got too aggressive right out the gate and snapped another main stem. It will heal, the plant will be stunted but its a hard lesson to learn, i think i need to get flex on the main stem right out the gate! Otherwise I bravely chopped several water leaves and feel like I had a great LST situation! If I hadn't fopahed right at the start I'd say things went perfect! Looking forward to the bounce back! ______________________________________________ They perked right back up. Even the snapped limb plant seems to be no worse for it. So I did another round of LST. Definitly snapped ANOTHER plant! although not as bad. Otherwise I gave them a nice little defoliation and I believe I have created a nice spread out base. We'll see how they do in the stretch! I must say they are showing alot of promise too! I'm very excited to see these babies in flower!

I didn't make life easy for my autos... topped 2x, repotted 1x, several defoliations, bad water stress for 2 weeks, moved to another tent... I couldn't hope for a miraculous harvest but I'm not complaining at all: in only 10 weeks from seed to harvest, not far from 58g dry, with dense and frosty nuggets, and a nice smell that fills my room as soon as I open the jars 🤩 I won't wait long for the smoke test 👌

Week 11 This week the amnesias got fat while their friends stretched and created many branches with flowers. Amnesia 1 (Seedstockers) With LST 8 weeks of flowering (73 days) It has 55 centimeters 14L LED 25 cm LUX 59.000 Amnesia 2 (Seedstockers) Without LST 6 weeks of flowering (69 days) It has 60 centimeters 14L LED 20 cm LUX 70.000 Gorilla Cookies Auto (Fast Buds) 1 week of flowering (45 days) It has 43 centimeters 16L LED 56 cm LUX 55.000 This Week - Defoliation and LST - Godzilla Cookies (Herbies) 5 Week (35 days) It has 30 centimeters 15L LED 60 cm LUX 45.000 This Week - Defoliation and LST Gorilla Glue Auto (Herbies) 2 Week (12 days)

So! A bunch has happend this week: defoliation, stretching and puttin' on some guuuuud weight ^_^ I defoliated the bottom third tier of each plant (about 6 to 10 leaves every 2 to 3 days over the week) They stretched like crazy, almost doubled in height for 2 of them as usual and the lil bish is coming on strong, with more bud sites and overall best morphology! And last point of this week's update, the swelling of the flowers has started and is in full gear to produce some beauties :D See y'all next week ;)

This plant has recovered 80% of the mistakes I made during its process, but I have also learned a lot and I believe that growing has become a new hobby for me.

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA (NEW) STRIVE NUTRIENTS 💪 Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍

Finally was able to get my humidity down! I had to leave the door open to the room since it wasn’t exhausting outside. Cracking the window wasn’t enough. Also added a small dehumidifier inside the tent. Plants seem to be doing well with the nutes right in the AC Infinity watering bases. I manually fed Big Bloom since it’s full of sediment and I was worried it wouldn’t work with the wicks. They’re pretty handy so far, but I’m worried I’ll have to clean them out before the grow finishes. Had to move my oscillating fan to where my camera was, so my timelapse is going to be screwed up. Oops. One plant is super close to my light, hoping she will stop stretching soon… Excited to see those frosty sugar leaves coming in!

25/Aug Another week passed by and she is filling up the net slowly. All green and lush enjoying the notnao cool breeze from the fan. I hope the temp will drop a bit next week. Will let me increase the wattage

It's chop down day she has 25% ambers now I would like 50%+ but she has had a rough life and it will most likely go to concentrates so less ambers the nicer the colour I find so I made the decision to chop her and I got no room in my tents for her as the website said 9-10 weeks and she's 11 and a half now and I try to have perpetual grows.

I couldn't do anything wrong to this girl. stayed up and healthy her whole life.

This diary should have been updated a long time ago but the lack of time and mine reluctance to actually go back to the time of harvest, I did delete most of photographs of the harvest in rage as it was not a nice memory for me, here is why. So the last update i made to the diary was on 19 September and already then i knew something was brewing because we had a week long rain spell and it did not look like it was about to stop at that and the weather forecast showed a month more of rain. Without that rain and high RH i would probably give them girls one more week under the SE 7000 :/ The weather forecast was unfortunately right, so all in all we had around six week of relentless rain...outside it was from 90 to 95% RH in my house it was mostly 85%RH and in my grow room which is located in a basement i had from 60 to 63%RH with lights and dehumidifier on and around 70% with lights off. And that was a killer for my tightly packt grow room. What i did was to open all the walls from the grow room at dark time and had two big external fans blowing air at my plants but it did not help much... My first observation of bud rot was on 24 of September while making photographs of the beautiful buds. That week i lost to bud rot 4 bud stems, after the chop while drying i found another 5 infected stems, and by final trim just before jaring them i removed one more. So all together i lost to bud rot 10 bud stems, four of them were really big ones. I had made some pictures of the buds with bud rot and of the buds hangin in drying room but they did not survive my dark mood :( Sot thats the reason i got only few photographs to show for it. The final weighing was actually not as bad and lightened my mood a bit, that and that that i did not found any more mold on my cured Killer Kush :) So the dry weight after curing was 720 gram of dry bud I still till today did not make # from all the trimmings...but the trimmings are properly dried and waiting for bubble bugs in my freezer. After this learning experience i decided to add at least one more 30W air mixing internal fan, and i did get to know one of my relatives possess a 300W dehumidifier so next time i will be better prepared. Maintenance wise i will try to defoliate and lollipop my plants more aggressively to let in more air penetration.