Currently day 23 of my purple punch auto grow by barneys farm. I have topped at the 3rd node and now starting to tuck and tie down bigger fan leaves. Progress is good so far. Decided to hold back on the bloom until I start the flowering faze. Nute Feed Mixed to 5L of water Calmag 2ML Micro 2.5ML Grow 2.5ML Voodoo 2.5ML INBETWEEN EACH NUTRIENTS FEED I ALSO FEED WITH ONLY PH ADJUSTED WATER Growing in a 60x60 tent with a philzon 1000w cob led sat 15 inch from canopy Day temp 25 c Humidity around 55-60 Night temp around 19 c

Thanks to Creepy_Steeve for the legendary tips, in this diary he guided me to remove a shell that was stuck on a seedling, now it has become one of the biggest plants in the crop 💪🙏 Flowering begins.I did defoliation on the lower tiers on day 4 of flowering ------------------------------------------------ Water: tap water at 300 PPM, I add 0.7G of Hybrid powder per liter to reach 800PPM and I adjust the PH to 5.8. Currently I water my pots with about 1.5L of water every 4 days -Daytime temperature: 27°C -Night temperature: 23°C -Humidity: 45-65% -Lamp: Mars Hydro FC3000. intensity 80% at 40cm from the top leaves -Room: Mars Hydro 100x100x180cm -Extractor: Mars hydro 402 CFM Max. power 2/10 -Substrate : 70% coco, 25% perlite, 5% vermiculite. My instagram : https://www.instagram.com/p/CuMhQ_BsjRP/?utm_source=ig_web_copy_link&igshid=MzRlODBiNWFlZA== Looking for MarsHydro equipment for your crop? 🔥 You can use my promo codes! 🙏😻 3% off with "houstone3" for: TS LED Grow Light, Tent, Ventilation 5% off with "houstone5" for: FC&FC-E&SP LED Grow Lights; Grow Tent Kits https://www.mars-hydro.com/?acc=hou-stone

Servus Moin! Die Devils Cookie One wachsen vor sich hin. Alles top, nichts zu meckern.

Day 72, 21st of November 2020: Nice little chubby typical Indica plant... She stopped streching and it was not significant.... Buds are coming nicely I am happy :) Fertilization is the same every 2nd day with the mix and the ratio above.... All LST has been removed as the plant remains the same so no need to keep her in "chains". The lamp is on 11.30 min and off 12.30 min. Last week was 15 min longer light cycle.... So every week 15 min shorter light cycle until the 5th week. So far -30 min. It switches on at 6 am and off at 17.30 pm.

They just keep stretching! The "smaller" plant added 10" of vertical growth this week alone. Busy week structurally as I had to move lights and wires to adjust for this change in size. Excellent bud growth on one, the now taller girl just showing bud sites formation.

Días finales de esta hermosa planta. A mi gusto le falta un poco, ya que viendo con la lupa, los tricomas aún se ven muy claros en su mayoría

Hello growers day 63 in the garden with blue monster auto she’s just getting beefy now the buds are full of resin she is popping off the weather is banging right now in the uk so she loving life outside I’m going to start flushing now so she should be ready very soon I’ll keep an eye on the trics and wait for amber to start showing so until next week be safe and happy growing ✌️

10 across the board

Week 10 … 😎 … all good 3 more weeks maybe, im still debating but so far so good

After 48 hours, these things are beast. I thought they needed more time, I couldn’t judge how long they were. I had to dig them out of the paper towel, learned that I need to use cheaper paper towels. 6 out of 6 germinated on my first grow. Let’s keep the same growth going. ******************************* 14 Hours After Potting ************** TEMPS The most recent video showing the domes is 14 hours after potting them. The temps have been very stable at 83F and 70% humidity. My ambient temp outside of the tent is 70F. AIR FLOW I’m currently only running a 6 inch fan above the light for circulation. I have not used the exhaust, I think the idea at this stage is to keep humidity high, any thoughts would be great. LIGHTNING I do have my TSW on max and lowered the height to 36 inches it was almost twice the height yesterday. I didn’t want to make the change so drastic and waited a bit before lowering the height. WATERING The top soil did feel a bit dry and a little moist under. Under the dome it still looks very moist. I sprayed the plastic domes, I’m using distilled ph’d water. I did some light watering on the soil but I’m not sure how much water I should be using . Now that I lowered the height soil should dry out quicker, any thoughts?

These ladies are officially flowering!

LSD Zamnesia Tripping 🙂 | Fresh Frozen, Ice Water & Temple Balls — Week 16 From Seed First of all… Yes 😄 We are once again dividing the harvest reports into multiple chapters, and once again we apologize for that. But honestly, there was simply no way to fit: * harvest, * drying, * trimming, * curing, * smoke review, * macro photography, * fresh frozen work, * washing, * extraction, * and hash making… …into a single GrowDiaries update without rushing through important parts of the process. And this part? This part deserved its own spotlight completely. Because this week was not about flower anymore. This week was about resin. Living resin. Fresh frozen material. Ice water extraction. Patience. Cold temperatures. Sticky hands. And slowly transforming trichomes into beautiful hash. For everyone joining only now, quick recap: These LSD girls were grown under 12/12 from seed from the very beginning. Minimal training, mostly natural structure, gentle leaf manipulation, and environmental balance instead of aggressive intervention. Part of the harvest was dried traditionally and already covered in the previous report. But another part… …never got dried at all. Straight during harvest, selected flowers were removed fresh from the plants and immediately vacuum sealed before going directly into the freezer. No drying. No curing. No waiting. Fresh frozen. And that changes everything. The goal here is preservation. When flowers are frozen immediately after harvest, a large portion of the volatile compounds: * terpenes, * flavonoids, * aromatic compounds, * and delicate resin characteristics… …can remain much closer to their living state compared to traditionally dried material. This is why fresh frozen extraction became so respected in modern hash making. It captures a version of the plant that only exists for a very short moment in time. Alive. Wet. Fresh. Fully expressed. And honestly? Opening those frozen bags weeks later felt like reopening harvest day itself 😄 The flowers still looked incredibly resinous even after sitting frozen for weeks waiting for wash day. Now let’s talk process. For the wash itself, we used the Bubbleator machine courtesy of Zamnesia , and honestly huge thanks to them for providing it. They knew I wanted to start exploring ice water extraction properly, and they were kind enough to support the journey. The setup itself is actually beautifully simple. First: ice. Lots of ice 😄 The machine was filled partially with ice first before adding the fresh frozen material inside the working bag. The flowers themselves were placed inside a closed 220-micron washing bag. This is important because the bag keeps the plant material contained while still allowing the trichome heads to separate during agitation. After placing the material inside: * more ice on top, * cold water added, * everything submerged, * and then… …we waited. Around 30 minutes or so. And this step is actually extremely important. A lot of people think washing starts when the machine turns on. But honestly? The wash starts before that. This resting phase allows the frozen material to: * slowly rehydrate, * absorb water again, * become fully saturated, * and most importantly… * become extremely cold throughout the entire plant material. Why does this matter? Because trichomes become brittle at very cold temperatures. The colder everything gets: * the easier the resin heads separate, * the cleaner the release becomes, * and the less physical force is required. That is also why ice exists under and above the material: * lower temperatures evenly, * protect the resin, * and maintain the cold environment throughout the wash. Once the water temperature approached near freezing… …the machine came alive 😄 And honestly? Watching the water slowly transform during the wash is always magical. At first: just ice, water, and flowers. Then slowly: foam, cloudiness, resin separation, and finally that beautiful milky golden water hash makers love seeing appear. Meanwhile on the side, we prepared the filter bags. We did not use every single micron separation individually because honestly sometimes over-separating becomes unnecessary depending on goals and material quality. Instead, we focused on collecting the grades we actually wanted to work with and enjoy. And then came one of the most satisfying parts of the entire process: Collection 😄 Slowly lifting the bags. Watching the resin gather. Carefully scraping. Separating grades. Observing texture and color differences. Beautiful creamy resin everywhere. Some lighter. Some slightly darker. Some sandy. Some greasy. Every layer carrying slightly different characteristics. After collection, the resin was carefully freeze-dried. And this part also requires patience. First freeze drying. Then breaking it apart. Then more drying. Then more waiting 😄 Depending on environment and conditions, full drying can take several days because trapped moisture inside hash is dangerous long term. Rushing this step can ruin months of work later. In this case, the process stretched closer to about a week before everything felt properly stable and ready to work. And honestly… This is where the magic really started. Once dry enough, we allowed the hash to rest briefly before beginning the hand-working process. No extreme heat. No giant pressure. No fancy machinery. Just: room temperature, body warmth, gentle pressure, folding, rolling, stretching, and patience. The room itself stayed around 15°C, which turned out to be perfect for working the resin slowly without overheating it. And this step matters far more than many people realize. When hand-working hash properly: * oils redistribute, * compounds begin merging, * terpenes spread through the material, * oxidation starts slowly, * texture evolves, * and curing begins transforming the resin itself over time. You are not simply “rolling hash.” You are starting a living curing process. And slowly… The texture changed completely. From sandy loose resin… to creamy material… to sticky dough… to smooth beautiful temple balls. Honestly, seeing that transformation happen in your hands never gets old 😄 Final result? Three temple balls total: * two smaller ones from smaller micron collections, * and one large main temple ball that became the true star of the session. Final weight: 46.5 grams.( big one ) And honestly? I was extremely happy with that result. Especially considering the quality, texture, color, and how beautifully this LSD washed overall. Once formed, the temple balls were wrapped carefully in parchment paper before being vacuum sealed for long-term curing. And now? They rest. Months. Maybe longer. Waiting. Because the goal here is not “fresh hash.” The goal is evolution. Traditional temple ball style curing allows: * oils to redistribute, * compounds to merge, * texture to transform, * aroma to deepen, * and the entire resin profile to mature over time. Almost like aging wine. Or curing cheese. Or fermenting traditional products slowly and intentionally. This is medicine with patience built into the process. And honestly… That part alone deserves respect. We also included: * detailed process photos, * collection stages, * macro photography, * texture closeups, * curing progression, * and multiple stacked macro images showing the resin in insane detail. Some of these stacks reached: * 62 frames, * 87 frames, * 114 frames, * and even 152-frame focus stacks. Because honestly, hash under macro magnification becomes another universe completely. The textures stop looking real. Tiny resin mountains. Oil rivers. Micro-crystals. Glossy surfaces. Soft creamy structures. It almost starts looking geological instead of botanical 😄 Mr. Baggy of course supervised the entire operation like the professional resin inspector he clearly believes he is. And next week… The final chapter arrives. Smoke review. Curing review. Flower review. Hash review. Terpene evolution. Effects. Textures. Lessons learned. Mistakes made. And final thoughts after this entire LSD journey from seed to cured medicine. And finally… Thank you. To Zamnesia for the genetics and the Bubbleator. To Plagron. To F.O.G. To all the LEDs, gear, and equipment involved. To GrowDiaries. To the community. To the OG followers. To the new curious visitors. To the silent supporters. To the skeptics. To the lovers and even the haters 😄 To everyone spending time sharing this strange beautiful plant journey with us. Wishing everyone: cold water, sticky fingers, healthy plants, beautiful resin, and enough patience to let good hash become great hash 🌱

Start of week 5. Week 4 went well, bud site development is going great, she's gaining size and weight, the smell is starting to stand out and she's very sticky.

She is really packing on the weight. She smells strong like gas and cookie. I can also see hints of purple starting to come out. She is now getting a big dose of koolbloom as well as a co2 supplement thanks to TnB Naturals.

Some good growth early on. First reservoir change after 2 weeks. Adjust PH each day back to 5.5 as it creeps up to 6.8 over 24hrs.

Very golden in colour, has a beautiful structure and a spicy smell. I really liked how even the bottom buds became chunky (: Def happy I tried this one