El registro corresponden a los dias 28, 30 de abril y 2,3,4 de mayo Despues de realizar corte apical y algo de lst junto defoliación leve. Hasta ahora las plantas van muy bien, creciendo muy bonitas y con fuerza. Tratando de llevar todo de la mejor manera ya pude ajustar algo el set donde tengo mis planta y cada vez más contento con estos resultados! Ya hoy la white widow ibl cumple 30 dias desde germinada y la zinfandel 23.

Started off by setting up the growing environment and dialling everything in such as; RO Water for the RDWC hydroponic system. Water Heater being set at 20 degrees C. Water chiller being set at 21 degrees C. pH being set at 5.7/5.8 Room Temp and humidity 20/23 Degrees C / 60%/80%RH. Instead of using rockwool cubes to place my seeds, I put them directly into the clay pebbles. I then used a DIY humidity dome to place over the seeds until they make an appearance. I have been top feeding RO water every 6 hours. Foil was used to cover the net pot to ensure no light leaks were going into the system. Highly important in DWC. Will add some light nutrients once seeds are more established. Until the next one!

Harvested the Clones! I'm stoked how #4 grew out, I think she's the winner! With limited space in my grow, I'm only going to be able to bloom out the rest of the phenos clones to week 3-4.. The show must go on.. It's the price I must pay for using non-ideal cloning methods... Next round of phenohunting will have 100% cloning success, using my new aeroponics cloning machine.

Die dritte Blütewoche hat am letzten Samstag begonnen. Ich hoffe die machen jz nicht mehr all zu viele Meter, mein Zelt ist schon fast nach oben hin zu klein. 10cm ca dürften aber noch locker drinnen sein. Der Geruch ist langsam auch sehr angenehm :))

These have been on water there entire lifes I'm I am a new grower and learned the hard way have now got a full parcel of green buzz liquids on the way

Bloom 8 day. the most beautiful of plants 🌿

So this grow wasnt to bad considering it was my first indoor auto grow. For the most part I am satisfied with. However I will stick with the high end genetics from here on out as I want to grow the dankest of the dank and this is what I enjoy doing so why not do it the best way possible with the best names in the game. Stay tuned to see what 🔥 I’m growing next!!! Thanks for tuning in and as always stay Smokey my Friends!! 💨💨💨

This plant was an absolute dream to. Grow, no issues at all with health of plant, just struggled to tame her as she was a a thick strong climber 💪💪. I'm so impressed with how this turned out, I could have flushed for another 3 days to make it 12days but I needed the space. After The 2 days of dark I was recommended I can definitely say it has vastly boosted her trichomes and the smell when I opened the tent blew my head away 😍😋 Aiming for a 10-14 day hang dry, The 10-12 weeks curing in jars with humidity packs. I will update with a dry bud weight and smoke test 👌 Bud wet weight is just 500g+ Final bud dry weight is 298g. Of juicy resinous purple and orange buds 😍 smells like sherbert and hang dry smoke test revealed a candy sherbert, no banana yet but hoping like the grow it matures with cure process now. Hits eyes straight away, sandy bottom kids, giggles, munchies, fun time with Mrs, bed. Full cycle with this one very happy over here 😉😁💚 FAT BANANA AUTO FROM ROYAL QUEEN SEEDS, big thank you to the team, and the breaders. What a pheno I received. I appreciate you all

Day 70/71 gotta install new fans, so we have a good circulation and airflow

hey guys sorry for the absence but in this period I have had a lot to do with my work and I have not been able to bring a good detailed diary, but finally now the holidays will start and I will be able to dedicate myself 110% to a new crop and new ones diaries. having said that, I think I will leave him a week at the most and finally reap the benefits 💚🌳💚🌳maybe my fault the RQS slow release nutrients did not perform as much as the ADVs in my tent, you can see it from the video of 27/07/22 where you can see that 2 out of 6 plants are visually leaner and less compact to the touch , I wanted to try on the same varieties in order to have feedback. I think it could also be caused by the crowding of the tent but with the ADV I have not encountered any problems. I will definitely try them again, giving them much more attention.

When I brought the LED lamp closer than 30 cm, the tips of the leaves of the plants dried up, fortunately they are fine now.

I'm so excited! This week she almost achived double size and show her first "hairs". Along with the 3x50W leds i added a 250W HPS lamp for the flowering stage. With the adding of HPS lamp the temperature rise about 5 celsius degrees and she became very thirsty! The "nutrients day" i use tap water and all the other days i use RO water only. My grow room has a short ceiling so i'm forced to light the plant from the sides and it seems to respond well on that!

02.06. the previous week I took to cutting back everything except 8-10 branches per plant. Each arm remains with sprouts at the top only (like lollipoping but with the leaves still on). I contemplated for a while before doing this an compared with last year's growth. Definitely want less little stuff in the lower region and a cleaner structure overall. TMV on the Quick Sherbet leaves looks contained. White clover growing along well, gave 1g / L of greenhouse feeding bio enhancer. This week is mostly cloudy and rainy so expect slower growth but good progress.

June 26, day 98, the Euforia is in it's final ripening phase, and will be harvested soon! I am dialing down the EC, although I do not do any major pre harvest flushes. June 28, day 100, emergency harvest time! I was going to push it another 3-5 days, but when I was examining my fattest cola I noticed the physical manifestation of my nightmares: early stage bud rot. I should have harvested days ago in hindsight, as days of rain pushed my RH up into the mid-high 60s. I only noticed it because I was bending bud tissue away from the stem, but there was clearly some white fluffy buildup around the base of a dead leaf stem. The good news is that I caught it very early, no bud tissue has died anywhere on the plant and what mold I could find was still white and fluffy. I had to immediately cut down the whole plant as a result. I cut away bud material around the few moldy spots, and put the rest of the buds from those colas into my pile for edibles/oils. 95 percent of the colas seem totally unaffected. Nevertheless, I have had to totally switch up my dry/cure technique by doing a wet trim of the large buds and a quick dry/cure to start to make sure no spores can spread elsewhere. My priority is really saving what has been accomplished so far. The good news is that early wet weights are very heavy, even with the bit of bud removal. 600g wet for the top colas, another 350g wet for the mid grade buds, and finally 1000g for the low grade buds left of stems for slower drying. This means I will hopefully end up with 200g+ dry bud for vaping and smoking, and much more for edibles, rosin, etc. I will have more details next week with the full harvest update!

Some beautiful fenotype

Avevo staccato due cime per pianta delle kmintz. Mantengono quello che sentivo mentre le toccavo. La prima pianta sa di caramelle zkittlez con un fumo che nell aria non è il classico odore di erba ma qualcosa di incensato e mi fa impazzire.La seconda è decisamente più complessa. Zkittlez/frutti di bosco/nocciola/gas. Ho scritto oggi a Ripper Seeds facendo vedere un po di foto e mi hanno detto di tagliarle pure anche se manca qualche giorno rispetto ai 63 dichiarati dalla casa.Ho già ricomprato 5 semi perché le rifarò sicuramente se non il prossimo ciclo quello dopo. Le due Watermelon Zkittlez proseguono la fioritura. A settimana prossima coltivatori 💪🤞

The video is actually from 4 days after I planted my germinated seed. Found the vid after I already posted Week 1! With the seed being an autoflower I was worried it looked a little small at first, but I was wrong...