Recommended
Likes
Comments
Share
@KivzBudz
Follow
In the end I’m very happy how this first Grow went. Tomorrow I’m gonna finish the other half and update some pictures. Curing begins now, can’t wait to smell and taste the full cured terpens! 😋🌱
Likes
6
Share
@LAShugars
Follow
Getting there! Continuing to feed her Pride Lands Flower and GreenGro flower finisher. Add seaweed, humic acid and silica to the water. I’m thinking one more feeding and then just water and blackstrap molasses. I sure am going to miss this girl
Likes
139
Share
The girls are doing well they took 64oz each on the last watering and I will continue to increase as we go along. I am very pleased with the progress so far and have my fingers crossed that it will continue 👍☮️
Likes
13
Share
Finally received a couple of humidifiers to test from the local shop. These shitty low cost humidifiers will not really do, I can only have them on non stop until the water runs out. If I connect them to a sensor that switches them off, it won't go back on because it doesn't have a mechanical switch, I have to press on each time. Still, let's see if this helps my poor dry leafs a little bit
Likes
Comments
Share
Week 1, first time using the custom made DWC bucket, should get slightly longer between bucket changes now.
Likes
7
Share
Que pasa familia, vamos con la cosecha de estas Black Muffin F1 de Sweetseeds. Esta variedad me resultó bastante sencilla de cultivary es bastante resistente, si no la maltratáis crece mucho y bien sana, la flor se ve increíble, tiene una cantidad de resina considerable y unos tonos rojos oscuros muy peculiares, se ven genial. El olor que desprende es bastante frutal con toques cítricos, no pinta nada mal, las flores están prietas. No da mayores problemas, el ciclo no es largo, cuiden con la altura ya que se desmadran un poco. IMPORTANTE destacar: En las fotos comprobaréis que ya no hay botes de cristal con sobres de bóveda, ahora hay Grovebags. Que son una especie de sobres o bolsas que retienen el peso, previene la aparición de moho y mantiene intacto el terpeno, para que el curado sea más óptimo. Hasta aquí todo, Buenos humos 💨💨💨
Processing
Likes
4
Share
Wow 😯 I’m so amazed by this CBD plant of spiced orange 🍊 from BSB Genetics she’s on node 7 and I’m not sure if I wanna too her or let her just go?? What do y’all suggest?
Likes
12
Share
Fue una experiencia nueva utilizando este ciclo de cultivo 12/12hrs, encuentro que es una excelente producción para el ciclo utilizado. Psicodelicia es una planta que recomiendo, buen aspecto, de un excelente desarrollo. Además de una excelente producción. Las flores cosechadas están perfectas para realizar extracciones, contienen mucha resina pegajosa y olorosa.
Likes
11
Share
She been getting LST daily, also clean water, she is looking good.
Likes
2
Share
@kissrubb
Follow
Buenas, cultivadores.  Día 08708/2024: actualmente tienen 22 días de vida,  hemos regado con fertilizante de crecimiento y también enzimas; utilizamos agua de osmosis con un pH de 5.9 y un EC de 0.9 en las siguientes semana le daremos su última semana de crecimiento y le añadiremos silicio para resistir estas altas temperaturas debido al verano, y mejorar paredes celulares, una variedad de sweet seeds ha tenido al principio de su germinación ha tenido un bloqueo nutricional, pero logramos solucionarlo en unos días seguramente hagamos una pequeñita defoliación para quitar hojas satélites y mejorar el reparto de luz entre los nudos 
Likes
11
Share
@BudBeezy
Follow
Now that the plant is dry, I can go into a few more details. In my opinion, the harvest is a complete success for a beginner. During the harvest I realised how hard the flowers are. After drying, they became even harder, almost rock hard. The flowers are covered with many shiny trichomes. The harvest took quite a long time. I spent about 14 hours on it, which was also due to the super meticulous wet trim. The reason for the thorough wet trim was the mould. Every single flower was examined. I disassembled the large flowers before drying to be on the safe side. It's nice to have huge flowers, but in the end they are chopped up anyway. At the end of the 8 days of drying, the GG4 Sherbet FF rewarded me with finest ice-coated flowers. Thanks to the wet trim, I didn't have to do any more work. I was able to separate the buds directly from the branch and put them in the jars to mature. As the offcuts were also super potent due to the thorough wet trim, I processed them into butter.
Likes
18
Share
@rockbo47
Follow
SUMMARY: Switched up to Mid Bloom strength nutes this week. I have also started adding 1 tablespoon of organic blackstrap molasses per every 5L. Though some argue this is purely for use in soil to feed the bacteria there is argument that it also acts as a bloom booster due to its active ingredients. She is fattening up nicely though not many tops and so I need density from these. DAY 51 ------ Sunday 21st February 11:30 I made 5L of early bloom nutes at a pH of 5.8 and 5L of mid bloom nutes at a pH of 5.6, both made with tap water. Sunday 21st February 18:30 I fed the NL 1.2L of early bloom nutes which produced roughly 300ml runoff (25%). DAY 52 ------ Monday 22nd February 11:45 I made 5L of mid bloom nutes with rain water at a pH of 5.9. I am adding half a tablespoon of molasses to every 5L now by adding just enough boiling water to liquify the molasses and then pour it into the feed. Monday 22nd February 18:30 I fed the NL 1.4L of early bloom nutes with molasses which produced roughly 335ml runoff (24%). [22°C/55%] DAY 53 ------ Tuesday 23rd February 18:30 I fed the NL 1.4L of early bloom nutes which produced roughly 400ml runoff (29%). With the dehumidifier set to 50% RH it seems to keep it at around 50% RH though the temps between 25-30°C. If I turn the dehumidifier off the RH climbs to 60-64%. Removing more leaves will lower the humidity and I do pluck the odd one every day that is blocking light (I rotate the plants daily 25° per day to ensure all sides get a fair share of light). [25°C/50%] DAY 54 ------ Wednesday 24th February 18:30 I fed her 1.4L of early bloom nutes with molasses which produced 200ml runoff (10%). The temps have risen to 30°C due to the dehumidifier. It is currently set to 50% RH which keeps the temps around 28-30°C and the RH at around 38-40%. I have increased the setting to 65% to see if that helps lower the temp and increase the RH up to 45-50%. [30°C/40%] DAY 55 ------ Thursday 25th February 11:30 I made 10L of mid bloom nutes with rainwater and molasses (level tablespoon per 5L). 5L at a pH of 5.9 and 5L at a pH of 5.8 Thursday 25th February 18:30 I fed the NL 1.6L of mid bloom nutes which produced roughly 610ml runoff (38%%). [22°C/55%] DAY 56 ------ Friday 26th February 11:30 I made 10L of mid bloom nutes with rainwater and molasses (level tablespoon per 5L). 5L at a pH of 6.0 and 5L at a pH of 5.6. Friday 26th February 18:30 I fed the NL 1.4L of mid bloom nutes which produced roughly 420ml runoff (30%). [22°C/55%] DAY 57 ------ Saturday 27th February 18:30 I fed the NL 1.4L of mid bloom nutes which produced roughly 410ml runoff (29%). [22°C/55%]
Likes
6
Share
I still get surprised each time I grow autos - they flower so quickly! And I grew fast flowerers just before. We´ve had a few bad leaves at the bottom. I don´t know if I screwed up a nute mix or if it´s something else. It seems to be getting better though. Now she is looking beautiful and she is forming nice flowers.
Likes
20
Share
This is a strain that is very easy to grow and resistant, after the fourth week it sticks a lug, and does not need a lot of vitamins, it grew with only 13 and 12 hours of light and went through cloudy days and a lot of humidity
Likes
20
Share
Hello growers day 1 with the gorilla glue auto from @weedseedsexpress big thanks to the seed bank for sending me seeds to join your competition hopefully I do your beans some justice and get some nice pics in there for ya I’m just going to keep her wet with water for the first 2weeks then I’ll start giving her some food so until next week be safe and happy growing ✌️