Likes
Comments
Share
That’s a wrap! Wow some really sizable nugs. Paid off to wait to stress train til later on as I feel like this plant had a lot more size and cola count to her than her sisters harvested a few weeks back. A treat to grow! On to the next 😘
Likes
5
Share
@4Haut
Follow
Hi@all, this is the end of the third week. I have topped the main stem and all the side branches. After that i tied down all the side shoots to achieve an even canopy. I also trimmed a few leaves to allow more light penetration. Overall, it seems to be doing very well. Now I’ll start fertilizing slowly. Greetings 😎👌 GrowHard.GoPro.
Likes
11
Share
Day 12 Starting to show preflowers. Seems a bit late. I will take clones today from top 3 plants 81f/76%. 1100ppm. 1000co2 37-53kluxx 4 very sickly and ugly plants Plant stems are all pretty stiff by now. Looks like i could have fit 2 more plants Day 14 Plants are doing well with height control. I did a second Topping of the main 4 branches for each plant the week before flower flip. Most plants are 22-25inches tall 3 of my White Weddings are looking very weird. Not a clue as to what is wrong. Flowers are developing well on each plant No more LST from here in out. I will let them grow how they are(minimal stress) Started Defoliating
Likes
4
Share
@Soskar69
Follow
The plant is doin very well, the colas are all getting bigger and the resin production is huge. I'm near the harvest so within few days I'll give her the last nutrients ans the next week I'm gonna flush her. I'm very happy about this plant, she takes nutes very well and give zero problem.
Likes
11
Share
Settimana 7 8/11/2022 8 lt demineralizzata 800ml rubinetto ec 300 Aggiungiamo 16 APT 16 enzimi ¾ cucchiaino silicate 8g mega bud ottendo Ec 1716 Ph 6.1 9/11/2022 Defogliazione e scambio posizioni: abbiamo messo quelle più sviluppate ai lati, e quelle meno sviluppate al centro cercando di portarle tutte allo stesso stato. 10/11/2022 8 lt demineralizzata 800ml rubinetto ec 303 Aggiungiamo 16 APT 16 enzimi ¾ cucchiaino silicate 8g mega bud ottendo Ec 1680 Ph 6.1 12/11/2022 8 lt demineralizzata 800ml rubinetto ec 329 Aggiungiamo 18 APT 16 enzimi ¾ cucchiaino silicate ottendo Ec 1213  Ph 6.4
Likes
40
Share
WEEK 12 - She is getting fat and frosty and she have crazy amount of leaves, so far Im happy how she is growing and cant wait to smoke her up
Likes
1
Share
7/22 Did some light deflation nothing crazy Had turn on the dehumidifier humidity been getting to high besides that everything seems cool
Likes
10
Share
Nothing has realy happened since I cropped the royal cream....It is just hanging. Decided to do a dry trim so that it takes longer to dry due to the fact I am having to just use my cupboard so the humidity is pretty low. Leaving the leaves on just means It takes longer to dry. I am going to crop the Easy Bud in the next few days when the mood takes me. I had 4 left over R. Cream seeds left over because I informed them that. bought 2x 3 packs and only 2 seeds germinated so they sent me another packet which is REALLY good of them and the sort of thing that means I would definitely use Royal Queen Seeds again, for sure! The trich's are basically all cloudy with a few clear. I cant see any amber but my loupe is a ridiculously cheap Chinese piece of crap. I will invest in a microscope camera so I can hook it up to my phone or MacBook. It is way too hard to keep everything steady In order to see what is popping with my sexy trichomes. Obviously feeding has stopped for about a week now. I forgot to change it In the diary last week so will try and correct that now.. I know it is not strictly relevant but I had to go somewhere earlier and took a video because I was able o walk in the middle of a main road in my town which Is usually packed full of cars, especially at the time I was walking on it. It is a time that makes me even more glad I grow my own. I really need to buy the bigger tent, lights and re-locate to the bigger, more subtle cupboard (not the one i am using to dry my weed in the video I posted) and then I will be able to effectively ScrOG the 2 or 3 plants I have, in order to maximise yield so I can be totally self sufficient with regards to my cannabis medicine. UPDATE - MONDAY I just realised I have made a proper idiots mistake an missed out on some much tastier buds because of it. OK, so I got paid today, so I though I would treat myself to some of them cheap COB chips I used for my last grow because hey were super cheap and actually really effective considering the price. I ordered 2x 100w 6000k veg spectrum chips with a solderless connection for my power. I also ordered one of these heatsink + reflector. https://www.amazon.co.uk/gp/product/B01MT824NP/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 My thinking was that I have a spare heatsink here that the old citizen CLU-048 is attached to so I was going to fit one of the chips into that and the other into the heatsink and fan I bought. This hought process lead me to go ad retrieve the old citizen LED and I thought I would try it. Still didn't work, then suddenly I thought it could be a simple blown fuse so I changed it aaaannnnd.....still doesn't work. doh! I started to remove the COB holder and COB from the heatsink (it was just glued to it using thermal compound) and when I laid it on the table I decided to test the driver without the COB holder on the tiny off chance it might work...nope I then realised maybe I got the + and - the wrong way round, tried again and boom works perfectly. The connection from the holder to the cob had bent slightly off contact. Really annoying that this whole time I could have doubled my photons to the plant, however, really nice that I don't have to spend a load more money on lighting in order to upgrade into the new room. So all I have to do now is spend money on a pre-drilled heatsink and a new metal COB holder for the citizen.
Likes
25
Share
@MaxMo8
Follow
I transfer to 3-gallon pot That makes me happy Happy roots happy fruits 😉
Likes
26
Share
@Wondrej
Follow
Week 14: Final Countdown (Flower Week 9) 🍌🥊 We’ve reached the final ripening! This Banana Purple Punch Auto by @FastBuds is finishing its 14th week from seed and its 9th week in full bloom. At this stage, it's no longer about volume; it’s all about ripening, resin density, and terpene complexity. 💎 Living Soil Performance: Following the 9 Cardinal Parameters, my focus is currently on: • VPD & Humidity: Keeping humidity low (around 40-45%) to drive transpiration and protect these dense, frosty buds from any late-stage issues. 🌬️ • Temperature: Dropping the night temps to 18–19°C to encourage those deep purple hues. The anthocyanins are really putting on a show! 💜 • Nutrients: No flush needed! In a true Living Soil setup, the plant naturally senesces as the soil microbiome slows down nitrogen availability while still providing essential minerals for trichome maturation. The "autumn fade" is looking beautiful. 🍂 Trichome Status: 🔬 Observation shows about 85% still not ready and 10–15% milky. I’m looking for that perfect "sweet spot" to capture the full sedative punch and overripe banana flavor. 🍌 It’s been an incredible journey with this organic ecosystem. The plant is incredibly sticky and the smell is overpowering. Harvesting very soon! One love growmies 🧑🏻‍🌾
Likes
10
Share
@Pearl
Follow
My ladies were suffering from light stress but i solved the issue before any real damage was caused. I have two pheno types here & you can clearly see the indica / sativa I'm feeding one on greenhouse feeding bio base feed & enhancer And the other is being fed exclusively on SHOGUN Both are still doing amazing in their own ways. No problems. Just happy veggies 💚
Likes
3
Share
Esquejes fuets del propagador. De momento 15/15 enraizados . Esperamos ver evolución!
Likes
24
Share
@Lazuli
Follow
I grow in pure coco with organic nutrients
Likes
21
Share
@Bluemels
Follow
Tag 102: Die letzten Tage sind angebochen, die Runtz ist schön bunt geworden, ich senke jetzt noch die Temperatur und Luftfeuchtigkeit.
Likes
22
Share
@Cannabud
Follow
Good Day! So this week has been another excellent one in regards to the weather and growing. The girl have been enjoying high 20’s from 9am through until 9pm. My ‘big’ super skunk is flowering really well. I’ve removed some leaves to thin her out a little. She seems to have taken to that ok. I think I did underwater her yesterday and late evening sun crisped a few of her leaves. A big drink tonight. I have to say I’m really happy so far with how she’s turning out. The other super skunk has outgrown the ‘big’ one by 15 cm now and she’s doing really well. I might start a seperate diary for her. Snow Ryder is also coming along really well with her flowering. PLanted at the same time as the superskunk but id say she’s 1 week behind but obviously that’s nothing to worry about. One thing i have been thinking is popping a couple more seeds and seeing if I can squeeze it in. The weather has been so good this summer I don’t see the harm in trying. Short and sweet this week.
Processing
Likes
62
Share
Happy 1 Month To My Girls (Inserts Celebration Emojis) I’m Very Proud Of The 1st Month’s Progress These Girls Has Really Exceeded My Expectations. I’m Very Proud Of The Of The Purple Power If You Go Back To Week 1 You Will See That She Started Off The Slowest But She Is Now The Tallest In The Pack Standing At 21 Inches (that’s without adding the few cm I covered with soil) She Has Also Shown Signs Of Purple In Her Bud Development (Favourite Color) Can’t Wait To See Them, You Go Girl! I’m Also Proud Of The Gorilla Glu (12 inches) Stardawg (17 inches) And Girls Scout Cookies (16 inches) Development, They Are My Favorite Buds Here In The UK. They Are Very Bushy & Branchy And Their Stems Are Very Thick. They Have The 3 Main Pillars To Accommodate BIG Buds. Happy Growing Everyone. #OwlGang #AGrowingEmpire
Likes
9
Share
🌿 Grow Diary Update: Week 5 Check-In 🌿 Hey growers, Can you believe it's Week 5 already? Time's flying, and so is our girl – she's a beast now! I've been itching to defoliate more, but I've maxed out the amount of defol i can do and i have now stopped completely to avoid stressing her out too much :/ Overall, she's looking happy, but I noticed some leaves getting darker than I'd like, so I dialed down the nitrogen a bit... Remember my PPMS struggle? Well, good news – got them down to 1200ppm but could not get it any lower.. i could lower the ppm/ec of intake even more to hopefully drop it but in this stage of flower feeding lower than 800ppms is too low unless you need to flush to reset the medium so i am just gonna keep sticking to the 800ppm feed for now and measure run off each time hopefully i can get it around 900-1000, yes these high ppm/ec levels are fine for cannabis but mostly when your using co2 thats like 700ppm+ but at the end of the day SHE LOOKS GREAT! Here's to another week of growth and learning! Happy growing, TheGreenGroomer🌱 ps - sorry for over exposed/out of focus images i will get better images for next update, also smells allot stronger when humidity is on the higher end, she smells so good!