Likes
Comments
Share
09/21/24 - Purple Punch 👊 & Green Crack 💚 Both these girls got the lollipop 🍭. All the winners stayed 🏆 😂. They got a bump up in the PPM, and we also increased the TPS Signal for the 3gallon dunk to now 3ml. 100% Bloom juice now. Runoffs are in the 6.3-6 4. So they thriving. 09/24/24 - Purple Punch 👊 & Green Crack 💚 Both these girls are drinking heavy, and already starting to see frost on the PP. We have them a top feed of just pH 7.2 water, to hit the 6.4 runoff.
Likes
8
Share
@mikearon
Follow
May 24th - Day 97: It's amazing to see how well the babies have recovered. Unfortunately, two of them have pretty much died, but hey, more space for the others to grow! Humidity is still quite unstable because I increased the frequency of watering, but it will be fixed soon. I will update on Sunday. They're drinking really well, about 60L every 2 days for 10 plants. I need to figure out a bigger container to hold enough water for a whole week.
Likes
21
Share
@Smokey89
Follow
So we are in week 2 of flower I ran out of Dutch pro and my hydro shop didn't have any in stock so I had to swap to canna 450ml A&B I've also added some bud blood. So today I did some defoliation to anything below my scrog net and tucked some of the bigger fan leaves to expose the new bud sites. I also raised my light a few inches to allow the ladies to grow into it. 21/5/21 The girls are growing fast I did some defoliation 2 days ago and I had to repeat today 26/5/21 Took some fan leaves off that where blocking bud sites only a small handful needed to be removed, I gave them a feed ppm 946 ph 6.3, bud sites are looking nice and healthy I've got plenty of air flow throughout my tent, have yet to notice any aroma but still very early days. That's all for now gays and gals happy growing and pleasant smoking ;)
Likes
1
Share
@pareto
Follow
She unfortunately molded a bit and my friend had to harvest her while i was on vacation. Really should add a fan to my setup.... She took 73 days from first leafs ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Set up cost (fixed costs) -Lamp: 40€ -Timer: 3,5€ -Pot: 4€ -Total fixed costs: 47,5€ Given 5 years (or 15 grows) usage time translates to around 3,17€ per grow in materials. Variable costs: -Seed: free -Soil: 4€ -Fertilizer: 3,50€ -Power: 18,92€ -Total variable costs: 26,42€ -Total costs per grow: 29,59€
Likes
20
Share
We are in Flush !! Was giving them GH Flora series + rapid start + cal mag
Likes
22
Share
@DevelGrow
Follow
Hallo Freunde 👋 die drei sind 21 Tage Alt! Es wurden drei Techniken angewendet,die LST hätte ich besser lolipopen sollen aber ist wie es ist! Ansonsten wachsen sie kräftig und werde je nach aussehen in 1-2 Wochen in Blüte geschickt! Keep Green and grow High ✌️🍀💚🍀
Likes
35
Share
@Paulolo03
Follow
Day 75, close to the end !! Still flushing and getting ready for harvest ! In approx 6 days, I'll harvest my first one, the rest a bit later, not ready yet. So I got a second hand furniture that I turned into a drying box to start drying while the rest is still growing. I'm so excited for the harvest !! It has to be soon cause I'm running out of weed ! I won't wait the curing to be done to start smoking it lol. A huge thanks to all the growers who helped or commented me, I learnt so much on this website, please feel free to ask for help, I'm not an expert but I'll always try to help the community :) Good luck to all !
Likes
95
Share
@Roberts
Follow
Northern lights germinated and sprouted on first try. She did have a issue shedding the husk. I accidentally damaged her upon helping her remove it. She looks like she will make it though. Everything is looking good beside that issue. She is hanging out in my autoflower room till I have a better spot to grow her. Thank you Medic Grow, pro mix, and Divine Seeds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
4
Share
@CalGonJim
Follow
4/22/24 🍓z I was going to take her down after I trimmed off all of the excess leaves and gave her some of the leftover maximum strength food from a space panda in the next tent. She really started taking off again, so I’m gonna keep her going. I’m gonna keep them all going and doing just great really starting to put out a lot of resin. They smell fantastic. I’m having a lot of fun with them so I’m gonna keep them going. I could take them down right now they are ready, but I just wanna grow them a little more. 👍👍👍 4/23/24 Wow they are great. ZStraverriez...hard to type.... is READY! I took the leaves off a couple days ago to see if I would get any growth but nope. So I will use FloraKleen 10ml per gal and do a 2 or 3 gallon flush and put her back in for a day. I harvested the CBD. It smells like berries, just great just the right size in a 2 gallon pot with no training. I found a seed in the CBD, the others might be seeding as well......that is my oldest tent probably has pollen somewhere. Still everything is good, but im getting a new tent...I also just got a MarsHydro light for 100 it's the light bar one. 4/23/24 Apricot and straw. gorilla are growing good. Zstraberriez....which is a HUGE BITCH TO SPELL....but WOW smells like berries and vanilla and happiness. I let some dry for a few hours and put it in the Arizer X2 and she was great. These are so fast and the colors are beautiful too. It's like a perfect autumn day with all the leave changing color. Except my colors are way better and I can smoke them.... 4/24/24 🍓🍓🦍🍑👍💎💎💎 I am seeing lots of resin form. I thought they would be ready to go, but it looks like they just kind of took a little pause and I trimmed off the unnecessary and fading leaves and they got their second wind and now seeing a lot of resin production💎💎💎. they smell great. They look like they’re ready to keep going for another two weeks so I’m gonna do that and I’ll just harvest a little bit along the way I smoke some of all of them this morning and they’re just great. 👍👍👍 4/25/24 I ended up doing a little bit heavier, feeding than usual. I did about 2 mL of all the supplements and now I’m seeing lots of resin. I’m very careful all the other nutrients have burned my plants horribly but I’m very careful in general. Hydroponic seems to do a good job without burning. Fastbuds has a 25 pack of all their different strains mixed together for 100. I might do that. I’m kind of neurotic. I may need to know what I’m growing I think about this. I really like all of their plants they have a personality all of their own. I like Seedsman and the F1 it’s from Royal queen seeds. 4/25/24 🍑🍓🍓 marsHydro FC-E1500. I just got this delivered today. It cost 100. Although it is a powerful amazing light is no good for me at home. The TS-1000 lights you can move the driver outside the tent and then the top of the light has a little resting tray. This one is totally for commercial use, you cannot remove the driver and its pretty heavy, sold construction all the way, but in my small space I’m gonna have to wrap this up and put it away. It’s a 10 out of 10 it’s a beautiful light super bright. It’s everything you want in a grow light for a commercial space but it is way too hot for a small 24” x 24” tent that I grow in. I have 3 tents and can't run lights over 90Watts or the room gets too hot, and I can grow 3 or 4 perfectly with the TS-1000 set at about only 90 watts, its just perfect. This will get far too hot in the small tent, unless I want to set my air conditioner to 72 and get a massive electric bill! so I’m gonna stick with these TS-1000, the most perfect home light for grow tents I have ever used. I’ll give this light away someday but the Mars Hydro TS-1000 is still the absolute best light I’ve ever used. I have 4 of them now. 4/28 🍓🍓🍑👍💦💦💦💎💎💎 I can’t believe the amount of res in that they are all starting to put out. They are really getting their second wind. I am just having a lot of fun with them so I’m gonna keep them going as long, probably for a couple more weeks at least until they are no longer viable, but I should be able to keep them going pretty good for a while. 👍
Likes
24
Share
@rucucu94
Follow
Esta enorme, nada mas que agregar. Me olvide de scarle fotos para el diario, pero le saque eso, ya que yo no estoy todos los dias. Se va para arriba ella, esta hermosa
Likes
31
Share
2022-09-17 Plants would need just a few Days longer. But Weather changed drasticly to lots of Rain and Cold. So i cut alot of the Topbuds, to give the rest of the Plant more ventilation and some buds were leaning out under the Roof and were getting wet. I only found 2 small spots of Mold. The rest of the Plant gets harvested next Wednesday, or if i see Mold. But normally Plants are well covered and have place to get airflow now But those Buds are superthick, and airflow is not to gurantee well thats outdoor growing. But iam very Pleased, and in common Honey cream is ready to get harvest. I just hope for 4-5 more Days of Sun- and dry Weather. The Plant smells superlovely, flowery and sweet
Likes
51
Share
@Waveform
Follow
Once again, this week starts where the former one ended. With the exception of all the cables you can see in the first picture. I dared to install a minimalized version of the Raspi control only controlling the self-built humidifier and one blower/fan combination. I was very pleased to see how easily the simple diffusor can hold optimum VPD as long as temperatures are high and humidity tends to fall below optimum VPD. A single 10 seconds evaporation can hold the level for about 2–3 minutes. I am not pleased to see the Monsanto blowers rather underperform. It’s impossible to reduce humidity or temperature with both running on full speed, while a lifting of the tent door will bring immediate changes. With the Raspi/Arduino success so far*, I am thinking about using old Power Mac fans which are WCM controllable and use 12 V. At least one to increase air intake, and maybe even the blowers. * It wasn’t any problem at all to have the Arduino collect CO2 and soil moisture data, so after some more cable manufacturing (aka helpless soldering), I could extend the Raspi control. I’m still uncertain about the camera module (@trelorny impressed me with his time lapse videos). I don’t want to put the hardware into the tent with its not so electronics friendly climate, already risking some rare outages of the temp/hum sensor. But the camera module cannot be placed far away. So maybe I’ll use the 3A model I own as a spare part as a camera driver. Any maybe, if it works, invest in a better camera module. Mine is generation 1. Oh, and the ladies! Gave them slightly fertilised water yesterday, and even it or the better VPD yesterday or a combination of both make me believe bud growth is a bit more visible today. The smell in the morning when I open the tent to release accumulated humidity is outstanding. They were already thirsty on day 57 again, so pure RO + a bit of tap water until it spilled out of their pot’s bottoms. Many fan leaves turning autumnally now, and the smallest Sherbet suffered a bit from over-fertilisation as I wrote. But it this stage I don’t go for leaf beauty anymore. Just another learning: Don’t use differently sized pots anymore. Hard to feed them individually this way. VPD was mostly in best range yesterday, and I have the feeling it really supports their bud growth. I added an "Evening time" option to my Raspi control that allows the humidity to sink a selected time before lights shut down. That made it possible to have humidity in best range for most of the night time too. They were even dry again on day 58 morning. Another time just water. The blowers cannot cope with the flowers’ smell anymore, and so sometimes my flat cannot hide who shares it with me. Day 60 presents me with a problem: I’ll leave on Friday for a few days. Considering the microscope pictures are not from the tops buds: Would you say it’s safe to give them another week? Problem solved on day 61. Only clean water from now on, and next week will be their last. You won’t see any new pictures for some days now. Me too … Something I wanted to share with you before I leave: I just finished to update my grow box control with a new PWM fan hat that keeps the Raspi cool, while at the same an infrared sensor can now measure real leaf and additional ambient temperature. Setup is much cleaner and more robust now, but I wish my flux would not make the solder stick to the tip of the machine instead of making it flow and stick at the tiny tiny spots I have to hit …
Likes
2
Share
Likes
126
Share
Day 2 : Plant is looking nice and healthy , will update pics later , as for today , snow man building with the little man :) Day 3 : ppms sitting at a stable 650 , little dawg is looking awesome, starting to bulk right up!! Day 4 : dawg drank 4 litres of water and 120 ppms overnight , upped ppm to 750. Day 5: This little dawg just keeps on drinking haha... Further stretch and bud sites starting to open up. Day 6: slight defoliation and tightened wires to open the inner branches
Likes
2
Share
Since Day 56, I moved her into the new tent sizing 150*150*200 cm and 450W Grow light
Likes
47
Share
@Brujha77
Follow
Beginn Woche 9 Blüte Denke für die rechte wird es die letzte Woche sein, die andren 2 Brauchen wohl noch bißchen länger. Blütetag 60 Die 3 Damen machen sich ganz gut🥀 Vor allem die ganz links wird fast schon dunkelblau/lila😍😍 Trichome sind bei der rechten und mittleren langsam alle trüb, Ember ist noch nix zu sehen.. Mal schaun wie lange sie noch brauchen, aber schätze mal noch max. 2 Wochen.
Likes
7
Share
theyre looking PEV strong. happy out. size to pot is great. take nutrients well. like the structure for so early days. looking good. i live in fear of these autos leveling me up one day where they are too big. this gorw is all about pushing it for me in small space. take care every1. have a great week. enjoy the overall summary with a legend voice