Likes
Comments
Share
7/29/24 week 8. Flipping is around the corner. I have to defoliate before the flip. I added recharge nutrient this week to help the ladies have a quick recovery. I'm only feeding recharge with a 3 gallon res fill. I usually fill up by at least 6 gallons. What are yalls experiences using recharge?
Likes
Comments
Share
Cultivo de Ethos, semillas asequibles -más con el multipack- y genéticas muy recomendables.
Processing
Likes
13
Share
SMOOTHIE AUTO (Fastbuds) 42 days from sprout. At the end of the sixth week and she started getting taller quickly. Almost doubled her height this week. Leaves mostly look good and bud spots are building.
Likes
Comments
Share
@grimm420
Follow
Will begin to lst next week, about what week does frostbanger begin to flower? Will also need to give blooming nutes a little early to get the magic going.
Likes
142
Share
Hey everyone :-) This week a lot has happened 🤗🍀. The 5 that are already in the 12/12 cycle explode day after day 😍😅. All others have been repotted, and will remain in the vegi phase for 1-2 weeks. Otherwise there is not much to say 😃. I wish you all a good start into the week, let it grow and stay healthy 🙏🏻🍀🌱
Likes
10
Share
Added top funnel watering wick, most insects/bugs use damp topsoil 1-2" to reproduce. This uses gravity, 👊👊👊fiber wicks water, and spreads evenly, to keep moisture under the topsoil out of the reach of bugs. Zinc is a chemical element with the symbol Zn and atomic number 30 Neodymium is a chemical element with the symbol Nd and atomic number 60 Thorium is a weakly radioactive metallic chemical element with the symbol Th and atomic number 90.
Likes
4
Share
Hi liebe Community and Welcome Back! 💚 Weiter geht's im Vergleichsgrow! Bio Tabs NL. vs. Weedefix (Stuttgart/ Germany) Hier im Bio Tabs NL Grow haben wir nun nach Tag 28 des Einpflanzens eine Höhe von 43 cm Erreicht. Die Triebe bilden sich rasant aus. Leider ist mir ein Seitentrieb abgebrochen, daher habe ich der Fairness wegen, bei der anderen Pflanze auch einen Seitentrieb an der gleichen Stelle entfernt. Immer wieder lerne ich, was die Cannabispflanze für ein robustes gewächs ist. Die stand eigentlich dem Ende nahe und nachdem aber Wurzeln kamen, ging es wieder Bergauf. Diese Woche, habe ich mit Wasser und 5ml Orgatrex (Melasse mit Pflanzenextrakten) gegossen. Und es zeichnet sich bereits ein stärker werdendes Aroma ab. Die Bedingungen im Growschrank sind Top! ————— 🌞 Temp: 21 🌚 Temp: 18°C bis 19°C 💨 RH: 58% VPD: 0,75 kPa 💡ppfd: 330 mpm —————
Likes
21
Share
Sieht alles super aus. Sehr dunkle Blätter. Dadurch sieht man den Zucker auf den Blättern schon sehr gut. Ist auch komplett überzogen schon mit Frost.
Processing
Likes
1
Share
2nd time growing this strain. Was the best of the bunch last harvest under a cheap 300W LED drawing ~100W from the wall yet still gave me over 4oz Hoping under this brand new Spider Farmer SF-4000 I'll get much more. Just fed plain water in week 1.
Likes
24
Share
@MaxMo8
Follow
I would like to thank all those in charge of this site. Also all those who supported me and followed me thanks to everyone I will ‏ I will keep you update guys win while the flowers are drying 😍
Likes
Comments
Share
5 semanas y 4 días de flora 🍋🍯
Likes
36
Share
@grundoh
Follow
Right now I am just playing the waiting game with White Widow and Industrial Plant. Both have shown signs of maturation with their trichomes but neither one has a majority of milky trichomes yet. In hindsight, I should have waited until Industrial Plant was more mature before I started flushing her -- I've lost a few weeks that I could have been continuing to fatten her up. I added more bamboo rods and tied branches to them with some plant tape on both plants. White Widow's buds are rock hard and keep bending its branches so hopefully the extra support will help. I cut off the main cola and a side cola of Industrial Plant CBD due to bud rot that I failed to notice for roughly a week. After cutting out all of the bud rot I could find on Industrial Plant I checked over her and White Widow meticulously to make sure everything was kosher. I added a spare oscillating fan in the tent to try and improve air circulation in the room. I have had trouble with humidity and temperature shifts throughout this grow -- something I'll have to dial in as I progress. I imagine the climate shifts combined with how thick the main cola was probably contributed to the bud rot. Seedsman White Widow Auto is ready to be harvested as of Day 100. Over 2 days her trichomes really started to turn amber. I have started flushing her as of today and plan to harvest a day or two into the start of Week 15. As for Dinafem Industrial Plant Autoflowering CBD? I am thinking of just cutting my losses if her trichomes haven't gotten to at least majority-milky by the time White Widow gets chopped. She just looks mostly-dead and only wants a drink once every 7-10 days now. That and I have some new gear I really want to test out, as well as some different ideas for my second run that I've been itching to get started on.
Likes
2
Share
Took the cut as I said I would got 6 off the galato and 4 off the MCMOG....it amazing how 2 becomes more would have more tree of the same to cut nxt cut🔥🔥💨💨💨
Likes
126
Share
@Th3L0rAx
Follow
Way to start the week more photos to come. Flushed using sledge hammer this week stretch has come to a complete stop and budding is in full force. The smell oh how can I describe but a sweet berry funk. They have taken very well to the fox farm nutes that I’ve been giving. Definitely some differences in 2 of four, DD1 and DD2 much more weight and little to no purple except for main stem and veins on existing leaves compared to DD3 and the runt DD4 buds are not as dense but man are they flying this deep lavender and purple. The smell from this girls is so sweet . Bud structure is different on the DD I’m guessing the sativa vs indica genetics are showing which are dominating the plants either way there is a wonderfully sweet aroma from all the plants. 4/19 I feed them more nutrients in a small attempt to see if I can push the nutes slightly past recommended levels, to date no signs of burn or build up ever so slight clawing of the fans but nothing I’m concerned about plants looking good.
Likes
17
Share
@Hashy
Follow
Week 9 Light cycle=12/12 Light Power=170w Extractor controller settings High temp=24c Low temp= c Temp step=0c High Rh= 50% Low Rh= % Rh step=0% Speed max=10 Speed min=1 Smart controller settings (during lights on). Lights on=10.01-21.59 Radiator on= below 22.0c Radiator off= above 23.0c Smart controller settings (during lights off). Lights off=22.00-10.00 Radiator on= below 18c Radiator off= above 19c Fri 16/2/24 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= automatic Feed=bloom nutes. Neutralise=0.1ml/L Silicon=1.0ml/L Calmag=0.75ml/L Terra Bloom=4.0ml/L Sumo Boost=2.0ml/L Roots=0.2ml/L Easy Ph down=0.11ml/L Ec=1.85 PH=6.4/6.6 Time start=12.00pm Finish time=13.45pm (11×5 minute runs with 5 minute gaps) Total flow rate=190ml/min Flow rate per plant=47ml/min. Total volume made=13L(13.5L) Total volume left=3L Total volume used=10.5L Volume per plant=2.6L (Est) Runoff. Total runoff=1.2L Ec=2.13 PH=6.1/6.3 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 #1 (Day 57)(Day 19 flower) 📋 she is starting to show signs of light stress. Lowered light power from 180w to 170w. New DLi=65.0 Sat 17/2/24 #1 (Day 58)(Day 20 flower) 📋 H=96cm D=17cm DLI=67.8 Sun 18/2/24 #1 (Day 59)(Day 21 flower) 📋 Lowered light power again as they are showing a bit of stress from the light. Power was 170w now 160w. I'm going to have to have a think about my next grow, either I stick with this tent and hit the plants hard with light when I flip to flower to keep them small, or try and cram a slightly bigger tent in the space allocated for it. This tent is 61×76×150cm with the option to extend it to 173cm. Mine is configured to the 150cm height, but because its extendable the top 30cm is inaccessible at the best of times let alone when the plants reach a decent height. Extending this tent will be pointless because that's another 23cm of inaccessible space. Besides I only have a max head room for 160cm where the tent is. Mon 19/2/24 #1 (Day 60)(Day 22 flower) 📋 H=96cm D=17cm DLI=67.8 HST Tue 20/2/24 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= automatic Feed=water Neutralise=0.1ml/L Easy Ph down=0.01ml/L Ec=0.2 PH=6.2/6.2 Time start=12.00pm Finish time=13.45pm (11×5 minute runs with 5 minute gaps) Total flow rate=190ml/min Flow rate per plant=47ml/min. Total volume made=13L Total volume left=2.4L Total volume used=10.6L Volume per plant=2.6L (Est) Runoff. Total runoff=1.25L Ec=1.33 PH=6.4/6.4 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 #1 (Day 61)(Day 23 flower) 📋 Wed 21/2/24 #1 (Day 62)(Day 24 flower) 📋 Thur 22/2/24 From today I'll have to pull out the front 2 plants to get any pictures of the back 2. #1 (Day 63)(Day 25 flower) 📋 H=97cm D=15cm DLI=67.8 Lowered runoff rack. Pots may be sat in runoff slightly. Lowered light power from 160w to 150w. H=97cm D=18cm DLI=60.0 She is developing quite quickly, because of the short distance between the light and the tops I'm seeing a bit of light stress, I'm going to keep my eye on that and push it as much as possible. Back soon. Take it easy.
Processing
Likes
8
Share
Heute am 21.1 nochmal alle unnötigen Blätter entfernt.Tag 53: Die Blüten entwickeln sich prächtig 😻
Likes
53
Share
Still chugging along even though I've neglected them a little. A fun little side experiment, I learned a lot. At least I'll have flower from 6 more girls, not a complete waste.