Likes
32
Share
Removed autoflower and put her in her own pot outside the tent. Foliars applied in strong blue 430nm with 4000hz tone. 20min dose prior to application. In essence, you're seeing a combination of the infrared light reflected by the plant, which the camera perceives as red, and any residual visible blue light the plant reflects, which results in a purple hue. I was doing more stretching of the stems, adjusting weights, just a little too much, and it snapped almost clean. I got a little lucky in that it was still connected, wrapped her almost instantly while holding her in place with yoyos. I am hopeful she will recover and reconnect the xylem and phloem channels. Oopsy level stress event. ANTHOCYANINS!
Processing
Likes
19
Share
Likes
12
Share
@Jesperado
Follow
Harvest time!!! Sadly one plant was taken by either an angry farmer or a lucky one, but the smaller plant did make it all the way. There´s things I will change next time around for huerilla growths in general. 1.) No more photoperiodic strains for outside grows. Takes too long and they hardly ever mature in my part of the world. 2.) I will add soil/nutrition for the plants next time. Now I have tried going the natural way and I´m happy I did. It was a nice minty smoke, but honestly I would liked more than 2 joints for half a year of waiting 😉
Processing
Likes
5
Share
@Ashbash
Follow
Looks like I have overwatered this one quite badly. I hope that's all it is. Few marks on some leaves as shown in the pics and video so I'll monitor to see if it gets any worse. Tested pH and it looks good at 6.9 so I'm gonna increase bloom nutes cos it could be phosphorus or magnesium.
Likes
2
Share
Edito 25/10/2025: He subido ya las fotos de los cocos secos, au00fan no lo he probado, ahora luego me haré uno con polen del trim para así probarla y tal, pero en sí el trim que habran salido como 15/20 gramos, eso no lo he pesado, lo tengo congelado para hacerle una extracción en el futuro.Por otro lado los cogollos tienen muuuuy buena pinta, ha sido un manicurado muy facil ya que han secado bien, y 88 gramacos secos y manicurados jajajajaja está de putisima madre, mi mayor producción hasta la fecha por planta, y mira que esta era mas pequeña que la Papaya Zoap que corté, me ha dado bastante mas!Contento con el resultado aunque insisto en que no sabru00eda que opinar respecto a la resistencia Ale, cortada. Me gustó la planta sobre todo el vegetativo ya que fue muy bien sin mostrar problemas y tal... Ahora, cuando llegó la floración ahí si arrancó todo, igual que la otra, la hyperion, con oidio y araña roja. Recalco que tenía dos plantas mas bien grandes y hermosotas que también lo sufrieron, pero a modo chiste... Una hoja pocha por bichos, alguna con un poquito de oidio.. pero en general resistieron muy bien eso, las otras. En fin, esta planta si que es hermosa, el cogollo central es precioso, una lastima que mi movil haya jodido la mayoria de las ultimas fotos antes de cortarla, por eso alguna se estas últimas fotos se ven mal, miradlas de lejos, mejoran jajajajajaja Bueno, les hice bud washing, o lavado de cogollos y subí las fotos para que se vea, no es video... Quizás en un futuro haya algo con YouTube, pero eso, es basicamente 3 cubos, como no tengo cubos cogí una garrafa, la corte, y le eché 7 litros de agua y 100ml de agua oxigenada (peroxido al 3%), cogí dos tappers grandes, los llene de agua y heche media cucharada sopera en cada uno de bicarbonato de sodio y medio limón exprimido igual, entre los dos tappers y lo mezclé todo bien. Finalmente cogí una olla porque no tenía mas tappers grandes disponibles xD y agua osmotizada (o de botella) pero fria. -Paso 1: enjuaga el cogollo, rama, o lo que quieras limpiar, unos 20/30 segundo en la garrafa con el agua oxigenada. -Paso 2: sacudes un poco lo que hayas enjuagado y lo metes a enjuagar a uno de los tappers con bicarbonato y limón (puedes usar 3, 4 tappers, o un cubo.. al fin y al cabo es cantidad para no hacerlo todo en 3 litros y que acabaes limpiando mierda con mierda :) ). Aquí pues otros 20/30 segundos. -Paso 3: finalmente enjuagas en el ultimo tapper, barreño, lo que sea, con agua LIMPIA (de ahí osmotizada o embotellada) y fria, para que arrastre mejor los ultimos restos. Ya finalmente lo pones a secar unas 3/4 horas en un tendedero o donde mejor pilles, pero con ventilación para que el agua termine de irse, o al menos lo gordo. Ya una vez pasado ese tiempo y que veas que los cogollos gordos, en la parte de abajo (en la cabeza si están boca abajo) están secos, sin agua sobrante vamos, los llevas a donde vayas a secar, en mi caso al armario, que por ese motivo les voy a dar un poco mas de tiempo fuera para evitar subir mucho la humedad ya que tengo la Papaya Zoap secando y le quedará unos 4 o 5 dias aún. Cuando seque, subiré los resultados y fotos del manicurado y todo... Yo creo que va a salir una buena producción y además como la alargué bastante, espero que tenga efecto soporífero que ademas de sabor y aromas, es el efecto que busco en la hierba, que ayude a dormir. Aclaro: el peso en humedo es inventado jajajaja sinceramente, además de que no iba a pesarla en humedo, osea, recien cortada xD, tampoco la iba a pesar teniendo en cuenta que sumergí los cogollos en soluciones para limpiarlos, por lo que pesarían como 4 o 5 veces mas que el peso de recien cortado xD.
Likes
23
Share
Likes
18
Share
Hey fellow green thumbs! 🌿💚 We’ve just wrapped up the second week of flowering with our Auto Fast Pete and Auto Northern Dragon Fuel from Super Sativa Seed Club. The excitement is in full bloom as our ladies continue their journey towards a bountiful harvest. Let’s dive into the details! 🌟 Week 6 (Second Week of Flower) Progress: Day 36-38: Bud Development and Stretching • Auto Fast Pete: Our speedy queen is showing remarkable bud development. The buds are swelling, and the plant is stretching, reaching for the light. The aroma is becoming more pronounced, filling the grow room with a delightful fragrance. 🌿🌸 • Auto Northern Dragon Fuel: This resilient beauty is also stretching and forming dense bud sites. The pistils are multiplying, and the buds are getting thicker. The structure is strong, supporting the growing weight of the flowers. 🌱✨ Day 39-41: Focus on Nutrition and Environment • Nutrient Strategy: Sticking with our plan of using only the organic nutrition in the soil, supplemented by regulator and CalMag in the reservoir. The Autopot system is working wonders, providing consistent hydration and nutrients. The plants are thriving under this regimen. 🌿 • Reservoir Details: • TDS: 400 • Temperature: 18°C • pH: 6.2 • Environmental Conditions: • Temperature: 31°C • Humidity: 51% Maintaining these conditions to optimize bud development and plant health. 🌡️💧 Day 42: Observing and Fine-Tuning • Auto Fast Pete: The buds are continuing to grow and mature. The plant’s overall health is excellent, with vibrant green leaves and strong stems. 🌿🌼 • Auto Northern Dragon Fuel: The bud sites are more defined, and the plant is showing no signs of stress. The foliage is lush, and the buds are dense and sticky. 🌱🌟 🌟 Care Tips: • Light: Keeping our full-spectrum LED light at an optimal distance (18-24 inches) to ensure even light distribution. The plants are responding well to the consistent light schedule. 💡 • Autopot System: The Autopot system ensures a steady water supply, reducing the need for frequent manual watering. This system is great for maintaining consistent soil moisture, which is crucial during the flowering phase. 🌊 • Nutrient Monitoring: Keeping an eye on the reservoir’s TDS and pH levels to ensure the plants receive the right amount of nutrients and minerals. This week, we’re focusing on organic soil nutrition supplemented with regulator and CalMag. 🌿 • Environment Control: Maintaining a stable temperature of 31°C and humidity around 51% to create the perfect conditions for flowering. Adjusting airflow and positioning to optimize plant health. 🌡️💧 🌟 Genetics Spotlight: Auto Fast Pete: • Characteristics: Rapid bud development, strong structure, and early resin production. This strain is living up to its name with a fast and vigorous flowering phase. • Future Expectations: Continued bud swelling and resin production. Anticipate dense, aromatic flowers ready for harvest in the coming weeks. Auto Northern Dragon Fuel: • Characteristics: Robust structure, dense bud sites, and resilience. This strain is showing great promise for a high yield and potent flowers. • Future Expectations: Significant bud growth and increased resin production. This plant is gearing up for a heavy yield. 🌍🌿 Fun Fact: Did you know? 🌿✨ The second week of flowering is often when the plants show their most vigorous stretch, preparing to support the heavy buds that will develop in the coming weeks! For all the in-depth action and detailed explanations, head over to my YouTube channel! 🎥✨ I’m sharing all the tips, tricks, and step-by-step guides to help you get the best results from your grow. This week has been particularly exciting, and there’s so much more to explore and learn together! 👉 Join me on YouTube Link in my profile 👈 🌟 Conclusion: Week 6 marks the second week of flowering, with both Auto Fast Pete and Auto Northern Dragon Fuel showing remarkable progress. The buds are developing beautifully, and the plants are thriving under our optimized care regimen. Stay tuned for Week 7, and happy growing! 🌿💚✨ #SuperSativaSeedClub #Week6Report #FastPete #NorthernDragonFuel #PlantMagic #GardeningJoy #NatureLovers #PlantPower #InspireGrow #YouTubeJourney Germination method 🌱 @thecannakan Genetics @supersativaseedclub_official Nutrition @aptusholland 🌿 @aptus_world 🌎 @aptus_es 🌍 @aptusbrasil 🌱 @aptus_thailand 🌿 @aptus_portugal 🌳 @aptususa_official 🍀 @aptusplanttechnz 🌺 @aptusplanttechaus 🍃 Ambient controls🎮 @trolmaster.eu @trolmaster.eu.support @trolmaster.support @trolmaster.agro Soil @promix_growers_eur @promix_cannabis LED - @lumatekeu Watering- @autopot_usa @autopot_global Love and attention- @dogdoctorofficial As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 More info and complete updates from all my adventures can be found ⬆️link in the profile description ⬆️ Friendly reminder all you see here is pure research and for educational purposes only 💚Growers Love To you All 💚
Likes
19
Share
@Doofy
Follow
They look good, the gurl in the back her flowers are gettin very nice!! 😍🤩🙏 I turn them 180° every 2 days 🙏 The one in front looks allmost ready... She´s lookin sharp, rocket to be launched... ❤️❤️ very thin plant, small harvest, small plant Sexy ladies!! ❤️❤️ she smells like berries and cream 😋😍 Gettin frosty...
Likes
4
Share
Rega com Fertilizante. Terminando de regar com o ultimo litro feito. Mais ou menos 150 ml em cada planta. 1 ml do liquido por litro + 0,15 g por litro do sólido. Ajustado o PPFD para aproximadamente 500 em cada planta
Likes
17
Share
@Naujas
Follow
This is my second growth in a suitcase, I got 30 grams of dry flowers from the first growth, but this growth together with FastBuds is obviously much better than the first one :) although the girl's leaves burn from the light, which is only 10-15 cm from the flowers, but the girl copes with it perfectly :) good luck to everyone.
Likes
37
Share
@MG2009
Follow
06/20/2018 Did some supercropping on #1, Fimmed #4 she showing pre-flowers. ( #1,#2,#3) Not showing pre-flowers. #4 Fimmed because she gets stretchy 2-3 times veg height in my own experience. 06/21/2018 Longest day of the year today,applied potash last week, topdressed with Espoma tomato Tone tomato 🍅 3-4-6 with biotone
Likes
42
Share
@MrJoint
Follow
🛁 Beginning to clear roots. ✌️🎃 Thank you for checking my cultivation.
Likes
51
Share
Sweet Seeds Runtz XL Auto Variety: SWS88 Indica: 47,1% Sativa: 52,5% Ruderalis: 0,4% THC: 17-25% CBD: 0,5% Interior production: 400-550 g/m² Foreign production: 50-175 g/plant Harvest Interior / Exterior: 8 weeks from germination Height: 60-120 cm Equipment: Mars Hydro ts 1000 (veg-bloom) Custom growbox 60x60 Biobizz nutrients (Veg & Flower)
Likes
41
Share
Likes
30
Share
@GYOweed
Follow
Waiting for stupid clones too root. I should just take 2 more cuts and flower it? Bubbled Organic tea not enough for this one. Need to give her a spray of GH nutes
Likes
4
Share
Put small amount of Mycos Arbuscular Mycorrhizal Fungi in the container with the seeds this time. < 1tsp . Worked pretty well. Went into a little bigger size prop pots than I normally use but I'm in no rush. I'll let them get settled.
Likes
168
Share
📆 Week 3, 20-26 May 2024 20 May - Increased light power to 60%. 21 May - Cut first 2 true branches off. 22-26 May - Observed and let the plant grow. 📑 I’ll always cut the the first true branches off any plant I grow. In my experience they just don’t keep up with the plants growth rate in general and only take away from it's overall potential. This plant seems to be very healthy and growing as expected, strong and fast. 🍶 20 May nutrient solution changed 🍽️ 20 May feeding schedule updated 💧 Using reverse osmosis water with EC/TDS at 0 🐉 Nutrient solution EC 1.7 at 72 degrees F 🔆 Light power at 60%, DLI 25 canopy coverage at 18hrs 😤 Using PYPABL, Air Pump, 400GPH That is it for this week. Thanks for the look, read and stopping by.