Clipped all major fan leaves and started flushing yesterday with only 4ml/L of flawless finish. She's still very coated in resin and her smell is still very strong. No purple colors yet but she has moved from a very like green color to a more golden hue. I plan on watering/flushing every other day until next week when he reaches her 56 day mark. I may leave her a bit longer based of trichome development so we will see and until next week.............. #HappyGrowing

Les branches de Purple shine sont assez épaisse même un peu trop, le LST est vraiment galère à faire pour l'instant je vais encore attendre un peu qu'elle se développe plus et j'envisage peu être de supercropped les 4 branches principal une fois plus développé afin de former la base(a voir les prochain jours 🤔) Le 1/05 rempotage de Purple Shine, elle a bien colonisé son air pot 1l passage en 4L géotextile dans un supersoil composé de (lombricompost,guano verre, sang et corne de boeuf sèché, phosphate naturel, zéolite, sel Epsom+ mycorhizines) et terreau covercrop Le 3/5 début du LST , pose de clip lst pour former les 4 branches principal, petit accident lors de la pose des clips un apex c'est bien cassé et ne tien que sur 1mm. Je fait une tentative pour essayer de le sauver mais je doute de résultat 😥. Le 4/5 perte de l'apex accidenté 😮‍💨😥 ce matin la branche avait les feuilles flétrie et la tige recroqueviller, fini pour elle le sauvetage a été un échec😥. Le 5/5 on se relève de cette déception et envisage quelques changements dans le programme pour que cette connerie deviennent profitable😉. Nouvelle taille des apex, on passe à 6 pousse maintenant je laisse un temps de repos à purple shine avant une nouvelle taille je prévoyais 8 apex et au final j'en aurai 12😉🔥. PS: même s'il t'arrive une couille, baisse pas les bras et relève toi, arrange toi pour que cette galère te soit profitable😉🔥

Désolé mais pendant plusieurs jour je n arrivé plus à charger mon journal ? Bref dernière arrosage avec nutriments ;) on y arrive tous doucement . Autrement j ai eu un petit départ de bud rot sur la melon gum (rien de méchant 2 calices coincé entre 3 immense têtes ;) j ai donc enlever les 2 têtes et désinfecté aux mieux (les 2 têtes n avez rien j ai donc pu les goûter hier soir et j doit dire l effet est vraiment sympa ;)

the white widow plant is now to big for the greenhouse. let´s the how it will perform on the outside now. i just let it grow. only nutrient and no training or something.

Coming all.

11 September 2018 - Day 78 Higher pH than wanted. Nutrients increased, so far so good, no negative results. Second stretch about to occur. Climate better Day 79 - Slightly lifted tips, will watch nutrients and heat. Day 80 - 600ml Water added 6.0 - 0mg Nutrients, to dilute heavy use of nutrients. A few leaves removed to open up light on newer bud sites. Day 82 - 500ml Water Added - 0mg Nutrients. LST Tightened alot to expose lower buds and increase overall bud. Day 83 - Nutrients added, lets watch her double. Day 84 - Happy with grow. Red viens in leaves and slight stem... beginning research.

I would definitely grow this again as it’s top quality bud

Happy Mother’s Day. 5/13 Getting weird like bright neon orange pistils. I personally think it’s way too early to have pistils changing colors already. 5/16 fairly certain it was wind burn. My humidity was jacking up and my fan was trying to compensate. Changed settings and we should be golden now. Plant is frosting up hella already. I think there’s more frost than there are pistils 5/18 day 20 of flowering. Last day of week 2

Se nos fue un poco de altura pero intentaremos arreglar el error farmers... al final quedo simplemente en podas apicales y de momento ramas muy finas. Iremos comentando el proceso Farmers!🍁

Week 18 (14-10 to 20-10) 14-10 Temps: 17.9 to 26.9 degrees Humidity: 42% to 67% Watering: 2000 ml. The buds are getting heavy and they are falling over, so i straightened them with some wires. Now i regret not topping and installing a scrog rack sooner haha 😅 I also removed some damaged leaves. 15-10 Temps: 17.3 to 26.4 degrees Humidity: 46% to 71% 16-10 Temps: 17.9 to 26.8 degrees Humidity: 51% to 73% 17-10 Temps: 18.9 to 27.6 degrees Humidity: 44% to 77% Watering: 2000 ml. 18-10 Temps: 18.6 to 27.8 degrees Humidity: 50% to 82% 19-10 Temps: 19.8 to 26.8 degrees Humidity: 46% to 75% Watering: 2000 ml. 0.8 calcium, 0.4 hybrids, 0.5 PK+ EC: 1.4 PH 6.2 The humidity at night is too high for my liking, i already have a dehumidifier running but its still too high. At the end of the day i opened an extra ventilation hole at the bottom (only had one open) I hope this will lower the humidity a bit. 20-10 Temps: 18.4 to 26.6 degrees Humidity: 48% to 65%

Week 13 (Aug/1/2024-Aug/7/2024) DAY85 - Nothing new. Water, check, repeat. Added Kelp Meal for nutrients this week. I am thinking how I will separate the plants this week--they're starting to bunch up together--staggered may be the best option to minimize space in the garden. DAY 89 - Gave one of the girls to my buddy. Helped with the bunching of the plants in a limited space. They're a lot to handle when you harvest alone. Kept the tall one, the short two(LST), the different one in the 45 gallon pot, and the bushy one(LST-ish). By the way: I include germination as part of the day count. So basically day 1 is when I put the seed in water. These seeds all rooted within 48 hours.

Plants started getting real bushy a couple of days after topping. Low Stress Trained all the plants at the end of the week by tying them down using rubber coated garden wire to spread out the newly grown tops. Also spaced out each plant evenly on the tray and turned on the other 2 PB2000 LED lights I had ready to go.

⚠️ We keep pushing the plants with 24/24h light schedule + increase nuts gradually. ℹ️ Crystal meths (3p) and fast berries (3p) are the tallests plants in the tent, we decide to experiment with the Crystals so we will make, #1 topping (tallest plant), #2 supercroping and #3 nothing. ℹ️ Girls scout cookies (2p) are the only plants in the tent that haven't trichomes yet (bloom) 😪. - 38 till 🔚 -

The Mandarine Cream is entering its third week of flowering, and the aroma is becoming increasingly potent. The plant is looking beautiful and vigorous, with the buds showing significant daily growth. The smell is evolving into a strong, citrusy scent, reminiscent of grapefruit. Environment: This week began with a cold front, bringing temperatures down to a minimum of 5°C and a maximum of 15°C. A light rain has helped increase the humidity, which could boost resin production, although the cooler temperatures may also slow down the flowering process, just as they did during the vegetative stage. Fertilizing: I've stopped fertilizing as the plant now has everything it needs from the substrate. Watering: Sparse, around once a week, to maintain the right moisture levels without over-saturating. Pest Control: Beauveria applications have been reduced to once weekly, and the garden remains completely free of pests, which is a pleasant surprise. Training: The main cola top remains tied down. I haven't done any further defoliation or additional training. The focus is now on letting the plant continue its natural growth as it transitions deeper into flowering.

So this grow came to a finshed but I had a. Few issues that’s held me up from finishing up the diary, but in due time I will reupload it all in order soon. But over all I will also update with a final weigh in of each strain produced so stay tuned 🤙🏻🔥

Lemon tree can endure pain, cold & hot weather, seedling is really a strong genetic, huge root mass for 2 week seedling, now I'm using Biobizz soil + dry leaves on top from past harvest

Die Green Crack F1 Auto zeigt sich bisher als echtes Kraftpaket. Sie wächst zwar etwas wilder als ihre Nachbarinnen, aber genau das scheint zu ihrem Charakter zu gehören. Normalerweise steht sie etwas geschützter als im Video, trotzdem sieht man gut, wie problemlos sie mit Wind und Wetter zurechtkommt. Die Triebe werden von Woche zu Woche kräftiger und die gesamte Pflanze wirkt erstaunlich stabil. Das einmalige Toppen hat ihr sichtlich gutgetan. Sie bleibt dadurch etwas kompakter, baut aber eine schöne breite Struktur auf und scheint ihre Energie lieber in stabile Seitentriebe als in unnötige Höhe zu stecken. Gerade Outdoor kann das später ein echter Vorteil sein, wenn die Buds schwer werden.Außerdem macht sie dadurch einen deutlich transportableren Eindruck. Wer seine Pflanzen bei Gewitter, Hagel oder anderen Wetterkapriolen mal schnell umparken muss, weiß das durchaus zu schätzen. Bisher macht die Green Crack F1 Auto jedenfalls genau das, was man sich von einer Outdoor-Pflanze wünscht. Robust, unkompliziert und immer mit einem kleinen Hauch von Chaos. 💪

All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball.