Welcome to week 5 of flower! Things are moving along and where gaining mass on the flowers daily! With some of the plants starting to fade into a nice purple in their leaves I can only imagine at the end in 4-5 weeks! With every passing day I get more and more excited by the characteristics on the plants! Huge shout outs to @MarsHydroLED for making outstanding gear for growers to use and enjoy! HUGE shout outs to @Seedsman , @PyramidSeeds and @GreenHouseSeedCo for making outstanding genetics that pump great medicine! Huge shout outs to all my followers and people who stop in to the diary to check it out alike! Keep inspiring to grow! Follow along and stay tuned this shows getting juicier by the day! -The Projexx Day#29F Pictures N/A. Ladies are starting to focus on bulking more or less now. Day#30F Pictures N/A. Fade on Kings Juice#2 is starting to really come in now. Day#31F Some of the pistols are starting to turn orange now. Still lots of time left on the cycle. Day#32F Pictures N/A. Fuel D.og 1 and 2 are starting to pump some mass now! Day#33F Fuel D.og#2 is still yellow but she's not getting worse or better, it may be something I can't control as I can't come up with any solutions to the issue. Installed the first net. May install another. Day#34F Pictures N/A. Flowers are thickening up and starting to give off their scent really well now. Day#35F Pictures N/A. Cleaned up the bottoms of the plants abit more as well as took away some leaves blocking light to flower sites. Recap: Things went well this week the ladies are pumping trichomes and weight won't be long till we see some real thick flowers. Over all really pleased with this run so far!

Looking good lowering temps to keep my terps from burning off remember once you smell it their gone forever lol! I did run through a few little problems you can see rip burn and some stretching one was a experiment and one was my own fault. As of right know tho I’m very happy for this harvest!

Well we're under on my first hydro run. Had to set off another purple punch as the seed was not healthy. The new one has just popped and looks good and only a week behind the rest so no biggie.

A very colorful plant with some thick trichomes. She’s surviving in the solo cup well! I’m going to begin flushing with water and endgame microbes this week.

The girls enjoyed the weather this week nice to see them lile this, we have like 3-4 weeks to go so stay blazin and wait

This girl has been one of my favorites. Pineapple express is true to it name looking like a pineapple once it fades the yellow, and the green are very beautiful together smells gassy with pineapple busting out of every tone

Just finishing up week 3. Girls are a nice nice shade of green. Buds are starting to shape and the fan leaves are getting some crystals. All is good. I harvest the other side tomorrow and ill be starting a karma genetics - sherb biker grow journal. Be sure to subscribe to that.

Piante sane, continuano a crescere bene. Le pink poochie si sviluppano chiaramente in altezza mentre tutte le altre hanno un aspetto cespuglioso Ho defogliato un po’ e tolto i rami più deboli durante la settimana Aperto i rami con lst

FBT011 Northern Lights From Fastbuds 2nd week of flowering 29th December 2019 Well she's shot up a bit since last weeks update and now sits at 54cm from soil to tip. No noticeable aroma as of yet but there is some resin as the buds feel slightly sticky when gently rubbed. I fed her some Mr B's Green trees Bloom mix and a 1/4 tspoon of Great white. *******As a side note the two cuttings I took have definately taken as they have both started to show their preflowers and have some tiny new growth. So I mmediately sprayed with my STS Reversing Spray ******* Cheers for looking in and I'll be back next week in 2020.

Hard to believe it's been another week. These beautiful girls are growing great. They're definitely swelling amazing especially at the top colas. Starting to see some faded leaves so I think I'll back down my nutes from 1050 to around 800. All in all Happy Growing.

A los 16 dias, pasados 7 de la última poda volví a quitar algunas pocas y así no hacer sombra sobre los botones, inicio de cogollo la herramienta más útil del cultivo en estos momentos , sin duda la regadera lanza xd. Dia 17 obté por el supercropping del apical de la nº5 visto que había estirado mucho, en general esa planta está creciendo mejor. La nº5 la que en un principio descartaba y luego decidí cambiarla por la nº2 . véase en las semanas 4 y 7

Fire 🔥 she smoked nice. Smooth and got a sexy taste. Overall a easy grown and will try again

She is a Beauty!! Exotic Dream!! Another week or two

Notes for flower week 11 (12/29-1/4, days 70 to 76) Can't place side-by-side progressives since website update.... disappointed 😔 Lots of yellow and purple leaves now - SKOL Vikings! Watching the Terps every other day now and feeding reduced nute flush water until harvest. I dont plan to 'fully' remove the nutes, but drastically reduce. Watering Days. Day 142/72 (last feed was day 137/67) Tested and Calibrated my ph pens. Fed 3 gallons of de-chlorinated tap (starting with 223ppm) mixed with 428ppm of 100% Bloom Mix Concentrate. Due to this soil showing a possible calcium deficit, I am still using 1ml per gallon add-in to test on all plants using this soil, so I added 3.0ml of CaliMagic (General Hydroponics 1-0-0) and then I ph balanced before feeding. The ph on this feed was balanced to 7.05 (7.0 last feed). I used knitting needles to help both aerate the soil and create new water pathways for the roots. I got ~17 cups of runoff (~19 cups last feed). Runoff was tested at 6.08ph and 1700ppm (5.96ph and 1640ppm last feed). Top soil tested at 6.26,6.23,6.55,6.50 for an avg of 6.385 (6.545 avg after last feed)

Start of week 4, the blueberries had major bud growth during week 3 and they filled in nicely. There are a few signs of deficiency in the larger fan leaves, but overall I'm very happy with how the blueberries are growing. The Super Lemon Haze is showing signs of deficiencies, she's also hungrier than the blueberries, she got an extra 2 liters of nutes at 1/4 mute strength, the last two weeks. She may require full strength nutes in the extra feeding, to help with the deficiencies. Still, bud site development is coming along nicely on the SLH.

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

June 7 - We ordered some new lights last week, they are 240w kingbrite samsung lm310h with uv/ir, 3000k, and meanwell drivers. We setup the new room and moved the girls into there. After a bit of LST and a watering (with nutrients) at roughly 7ph, they were ready to go under the 2 new lights and the same SF-1000 we have been using in this grow. The new room is a 12 ft enclosed trailer. I moved everything from the small tent into this. I put clear poly on the walls, floor and ceiling. I put poly on the shelf I am going to be keeping in there as well. I bought 50ft of 6mm mylar and lined the floors, roof and sides with it. I plan to get some reflective tape to seal everything and to cover the wood. I did not get much of a chance to watch temp's today as they it was later in the evening after all was said and done. The inline fan blowing in air from outside. June 8 - 9 AM i checked the plants, they were at 25.2 and 50% RH. Late through the day I had checked and we had gotten up to around 32 degrees. So I moved the inline fan to the closer vent, hooked up to that, and had the air blowing out of the trailer with the inline fan sucking it from above the lights. I then added oscillating fan and had it blowing air on the left side of the room so it would somewhat circulate once I closed the doors. I then checked at about 9pm and we were at 22 degrees. Definitely noticed a decent amount of growth already. I have the lights on a 22/2 cycle as I was worried about the heat at night time. June 9 - Some great growth from the girls, still having problems controlling the temps in the afternoon. I decided to prop the door open a bit to have a constant breeze throughout the day while I am at work. Decided to do some more LST and also a bit of defoliation. I took about 25% of the leaf's that were blocking the new growth as it was getting a bit bunched up. I was then told the leaf's are almost solar panels for them. So from now on I will be trying to just do some tucking unless needed. The leaf's I removed were most of the damaged leaf's, I am not to sure if that makes much of a difference. I gave them a watering with only water as there is a potential I am getting a bit of a nutrient buildup along with the PH problem. Or potentially the reason for the ph problem is nutrient buildup. After watering with A PH of 7 I got some run off and tested it. The smaller plant gave me a PH of about 5.5 where the bigger one is around 5.0. June 10 - Plants are looking happy and showing tons of growth. Seems to be trying to stretch outwards. Not a ton of sign of PH issues showing so potentially getting it under control. Still a bit of damage to previous leaf's but it is what it is! The last few days I have been leaving the door open a bit in order to keep the temps down. I decided to test something and turn the lights off (automatically) at 11AM and back on at 5PM so light schedule has now changed to 18/6 and it seems I may have figured out the issue. We haven't had lots of sun the last couple days so it hasn't been to hard and I have yet to know if it truly fixed the heat issue for now. (I will be looking into a ac unit as well since it typically gets to around 30-35 around here. June 11 - Pulled some of the branches back down and added a few more LST spots. Seems we have a good amount of growth from the smaller plant out of the 2 topped spots. Unfortunately it looks like I fucked up on the bigger plant and only one of the nodes seems to have new growth. I will continue to monitor that but I think I cut the node to low and also to soon. Other then that, the girls are doing great. They seem to be absolutely loving these new lights. I gave them some nutrient water today as well. roughly 3L each. They seem to be A hell of A lot more thirsty under these new lights. June 12 - The girls are doing great , they are still just doing growing away. Lots of progress everyday. I am going to be getting a go-pro so I can set-up a time-lapse for the rest of this grow. I received my new inline fan, I got A ac infinity CLOUDLINE T4 with the temperature humidity controller. I am going to be having one fan pushing fresh air in and one fan pulling out the hot air. I will be doing that tomorrow since I have to work today. June 13 - I ordered another 50ft of mylar and that showed up today. I have decided to remove the shelf and add another 3+ feet to the grow space. So today I installed more poly, mylar, the ac infinity fan. I have it set-up to pump in air if it gets to warm. I am thinking of switching it to the output that way if it gets to hot or to humid I can have that air pulled out of the trailer. Right now my other inline fan is the outtake and I just have it set on full. Overall I think everything is set-up a bit better and more accessible. I will be putting my 2x2 tent in there at the left of the doors so I can have a veg room when these 2 are in flower. I plan to have 4 in veg and 4 in flower for the next grow. Still waiting on JOTI seeds, ordered 3 weeks ago and still have not been shipped. I will be getting those going the moment they arrive. The girls seem to be happy still, did a bit more LST to try to keep everything even, mainly I'm just pulling down on the spots I already have tie wire on.