Week 1 Day 1 - 8/12/2023 1st Water change Day! Such a special time it is when you remove the little bit of Nutes that you gave them as an appetizer and you give them their first real meal. Added 39 Gallons of Water to my system SILICA= .5mil/Gal = 19.5 = 20mil Root Drip = 1mil/Gal = 39mil Cal Mag= .25mil/Gal = 9.75 = 10mil FLoraMicro= 3.0mil/Gal = 114mil FloraGro = 2.0mil/Gal = 78mil FloraBloom = 2.0mil/Gal =78mil ORCA= .5mil/Gal = 19.5 = 20mil Week 1 Day 2 - 8/13/2023 Everything is looking good the roots are making their way to the water and the new grow is looking nice and green. Week 1 Day 3- 8/14/2023 Everything is right on track, they are looking beautiful and in the praying position all leaves happily lifting towards the light. Week 1 Day 4- 8/15/2023 A little worried today her birth Twin the BA I am growing out is looking great and is raised towards the light and this one is just slightly under.. Will keep an eye on Her. Week 1 Day 5- 8/16/2023 Walked in and the humidity was under 60.... ohh noooooo.. So I added 2 humidifiers to the tent and attached them to my InkBird controller which is set to 62. Also looking at the roots and she has some poking out the bottom but just not in the water yet.. Luckily we are set for 14 days before next water change so the system will stay stable and her sister already has roots in the water so she should only be a day or two behind.. we will just keep tracking but she is delayed. Week 1 Day 6- 8/17/2023 Roots in the Water!!! Huston, we have a successful launch. This grow is on! Humidity was a little low this morning so I refilled the humidifiers. Other than that the temp looks great, the PH looks good, the PPM looks good the plant is in the praying position and all damage from the little drowning from over filling the cloning machine seems to have been fixed. Happy Happy. Week 1 Day 7- 8/18/2023 Yay.. week 1 in the books, roots in the water growth has started. Everything for growth and environment is looking good and on track, there are a couple of mutations with this Lady will keep an eye on those leaves. IMO this grow is going A lot during this week 1 then week 1 of the last grow when I had them drowning. Really excited on how this grow is going to come out.

Week 6 (27/02 - 05/03) During this week I will continue to feed the plants with Bio-grow, Bio-bloom and Top-max every other day. The two fat banana are in flowering stage by an entire week, while the blue cheese is in early stage of pre-flowering. The parameters remain unchanged with respect of the previous week: - light: 100% power, 18/6 h per day; - inkbird: 23.5°C, +1°C cooling, -3°C heating; - extractor: 50% power, 18h per day. 27/02 D35: removed a couple of lower leafs to the plants, they were a bit dry 28/02 D36: 1.5 liter of tap water each plant. Today I noticed some brown/orange spots on leaves of fat banana #1. Thanks to golden advises given to me by @GrowingGrannie, I will try to adjust nutrients in the next days. 01/03 D37: first day of recovery, sprayed leaves with tap water. 02/03 D38: second day of recovery, added 1.5ml of Bio-bloom and 1 ml of Top-max to 2.5 liters of tap water (almost 0.8 l each). 03/03 D39: third day of recovery, sprayed leaves with tap water. 04/03 D40: watering day. Added 2ml of Bio-bloom and 1ml of Top-Max to 2.5 liters of tap water. 05/03 D41: end of the week. The blue cheese has grown a lot this week reaching the taller fat banana #2. All three plants seem to be healthy.

started the first week of flowing all is healthy and bug free !

We´re getting there! 😉 Took the week for flushing, net removed for easier handle/access and thricome check.. 😋 I think this one is about ready and we´ll be the first one to go down! 😊 Not the biggets yeld but those buds look mighty fine 😍

These girls continue to shine in the finals days. It's day 63 and they arrive at their destination. Will start plucking them one by one. First one being plant 3 I believe. Then two then one. Reverse order of naming. Been getting water every day and will have the final pictures soon.

Room is almost there Flood table coating was completed this week. Took forever to cure in the colder weather, but it is looking great now. Normally I wouldnt use this stuff because it is $200 per gallon, but since Im in the industry, these expired sample cans didnt cost me a cent and provides a much more durable, reflective, cleanable and puncture resistant alternative to plastic. Im very happy with the table overall, it cost me very little to build I installed the fan and carbon filter, moves about 750 cf per minute. Its a bit loud, but its huge, so what are ya gonna do? My dutch bucket pails are slowly being collected from my local coffee shop. I need 4 - 8 more. Ive got all the hardware to set up the watering system, so I will work on that in the coming week

Wow, they are growing! Began LST on day 26 and have been working them daily. We did run into our first speed bump. Noticed that some newer growth near the tops of the plants had white/yellow tips on leaves. Using a CMH, I was concerned my light was too close. I moved the light up quite a bit but continued seeing new growth with this problem. Realized it was likely minor nute burn from FFOF... wow it really is as HOT as I have heard... something to consider on future grows. I have left the light up higher though, as I read multiple accounts of people using CMHs near top of tent with no negative effects. To this point, I have seen no stretching or anything that would cause me to lower the light. I did do a light cal/mag feeding once this week but do not believe it has anything to do with the burn. Reading other grow diaries for this strain, and using RO water, I wanted to begin feeding at a low ppm. Maybe not the best idea considering, but we live and we learn. Photos/video are day 29 since breaking the soil.

This week basically was just feeding the soil with molasses ( 5ml per 1 litre ). And Reverse osmosis water. Environment control during this stage is of high importance. Since the plant is moving from its adolescence to teenagehood, so to say lol, it's really vital to keep the conditions steady. Other than that, this week was a breeze. Thanks to any and everyone that's viewing my diary, I do appreciate the support. 💚🌿

I had a lot of fun with this grow and can’t wait to taste the final product after dry and cure!

Seedsman Auto Lemon is the 4th round of seeds started in my perpetual garden of auto flowers. So far this plant is growing strong. I expect it to start stretching this week. I also decided to try topping this girl today and will probably bend her next week. Growing in organic composted 'super soil', no additional nutrients added yet. Also as you can see in the pictures there is a 26w CFL (100w equivalent) about 6 inches away - this also helps provide some side lighting to the older plants. Setup: 24x48x72 grow tent 1 Viparspectra V300 300w LED fixture 1 Viparspectra R300 300w LED fixture 1 CFL 100w (26w actual) 4” exhaust fan w/carbon filter 190cfm 6” clip on fan Electric oil filled radiator behind air intake

😁🍀👨‍🌾🏻👍✌️💚

Gran variedad, de fuerte y notorio aroma. De sabor dulce y fresco y bellas flores ❤️ Ideal para aliviar el estrés y la falta de apetito 🖐️🏻

Send them into Flower at Day 36 Used Scrog net on Day 38 + 1.5l water fertilized with top-Max, BioBloom, BioGrow for every plant. One Runtz got a little LST Ladies looking great 💚

This grow was pretty simple ! They went a total of 103 days from seed! Very trichomy dense buds with the smell of Berries vanilla and skunk ! This is a must try for you all Fastbuds has the greats!!!

Eccoci qui... Ormai manca davvero poco ci siamo quasi.... Ora niente più fertilizzanti solo acqua ed attendiamo la maturazione.. Ma quanta resina ha!!!!! Seguiranno aggiornamenti, grazie a tutti per il supporto🔥🌲❤️

i looked awesome all growcycle...i streched alot & i noticed it drank alot more then the other plants while growing...had a good yield, i´m very happy overall

Nuestros cogollos ya empezaron a encogordar, esperamos que con los aditivos de flora nos vaya la raja ! aksjas

Man sieht die Problematik jetzt deutlich das ich an den tabs sparen wollte