Likes
Comments
Share
This week the time had come, she was ready to be defoliated and chopped down. And it's now hanging to dry, I'm curious to see how high the yield will be.
Likes
9
Share
By nxt week males will be pulled and remaining would be transplanted to something big n start a lil feeding and training
Likes
8
Share
Hi liebe Community! 🍀💚 In der zehnten Blütewoche ( Nach Tag 67) war es nun Zeit dass Prachtstück auf die Schlachtbank zu führen. Die Blütenbildung hat sich prächtig und sehr voluminös entwickelt. Nach dem Trichomcheck, ist nun alles milchig mit vereinzelten bärensteinfarbenen Trichomen. Sie lässt ein sehr undefinierbares Aroma verströhmen. Es ist weder Süß noch Erdig. Harzig nach Cannabis ja aber ohne klassische Aromagebung. Die Umgebungsgegebenheiten waren Top. ————— 🌞 Temp: 24°C 🌚 Temp: 19°C bis 20°C 💨 RH: 56% VPD: 0,98kPa 😎 PPFD: 830 mqm ————— Grüne Grüße 💚
Likes
64
Share
Hi everyone 🤗. Not much has happened this week. It becomes bushy and bushy 😅. I even considered giving her another 2-3 weeks of growth, but again to give a bigger pot 😊. I'll decide spontaneously the days. I wish you all a nice start into the week, let it grow 🌱 and stay healthy 🙏🏻👍 You can buy this Strain at : https://www.barneysfarm.com Strain : Blue gelato 41 clone from mother (Barney's Farm) ☝️ Genetics: Blueberry x Thin Mint Girl Scout Cookies x Sunset Sherbert 👍 Vega lamp: 2 x Todogrow LED HLG Quantum Board 100 W ( 200 W ) 💡 Flower lamp: 2x Todogrow LED CXB3590 205 W = ( 410 W ) 💡 ☝️ Soil : Canna Terra Professional + ☝️ Fertilizer: Canna Terra Vega , Canna Terra Flores , Rizotonic, Cannazym, CANNA Boost, Pk 13/14, Canna Cal / Mag, Canna Ph - Grow, Canna Ph-Bloom ☝️🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EG. Add Cal / Mag to 0.4 Ec Ph with Ph - to 6.0 - 6.3 💦 💧
Processing
Likes
20
Share
@AdamCajda
Follow
Finished 5 week of 12/12 and it finally started to show some preflowers 👏👏 girls are very bushy and starting to stretch a lot but they have so many new branches that I have a feeling it’s gonna be monsters:) Looking forward to next few weeks 👍
Likes
6
Share
Hello everyone and welcome back to my diary. Tomorrow marks the end of the fourth week of growth for Titan F1. I don't think the plant is ready to flower yet and I think it needs at least another week to grow. Only time will tell if I'm right or not. This week has been quiet, but we have two important updates. 1) At the beginning of the week, I gave it some care and removed a few leaves that I thought were unnecessary. A bit of defoliation. Like 6/7 leaves removed. 2) Today, it had some more maintenance, this time more intensive. I removed two excess leaves and applied the LST technique for the first time. Honestly, I enjoyed modifying the pot to accommodate the holes where the string would be attached. To tell the truth, this low-cost adventure is becoming interesting, and I am having a lot of fun doing it and experimenting. To tell the truth, my LST seems a bit aggressive and excessive, but we'll see in the next few days how the plant decides to respond and react to the LST. Maybe it will die, hahaha. During this week, and reading other diaries for comparison, I determined that my plant is NOT drinking enough water. The problem arises because I am unable to determine how much water is left in the soil/pot. So today I decided to use a little cunning and weigh the pot when it was completely dry and then again after I watered it. I watered it with about 1050/1100 ml of water mixed with its weekly dose of nutrients. This time there was excess water, resulting in excess dripping. In the final weighing after watering and after the excess water had drained away, the final weight increased by about 720/730 grams. The water I added was around 1050 grams. So 75% of the water remained in the soil. Dry it was 4400 grams, wet it reached 5120 grams. I don't know if this is good or not, I hope the plant is doing well. In the meantime, I have ordered a device that allows me to check several parameters in the soil, such as moisture, acidity and other things that are important to us growers. I feel like a child at Christmas :). I also bought a pH meter for the water, as mine broke and I had to buy another one, and I haven't been able to check the acidity levels for the last two waterings. I hope it doesn't bother the plant too much and that it continues to grow. I've deduced that it drinks little because I'm forced to water it practically once a week. I expected it to consume more water, especially in its current pre-flowering phase. The new device on its way will help me keep all the parameters under control: the soil, the plant, the temperature, the water levels, the humidity and a few other things I can't remember. Everything should be ready next week. The lamp is on full power all the time, at 100% with a 24/0 cycle, 7 days a week. The plant has reached 20 centimetres in height. I wonder if this LST will keep it small. I have some space issues, so I can't let it grow too tall, which is why I'm using LST. Otherwise, everything seems to be going well, I hope I'll be able to smoke this one. Thanks everyone, see you next week with new updates, who knows, maybe it will start flowering :)
Likes
12
Share
Starting week 2 Veg - See below for specs Nutrient feeds remain the system Height - 2 inches (Not much progress in height) Width has definitely grown out Water feeds continue to be everyday - Have a gallon+Nutes Light Intensity - 100% *Mid-week review - 8/18* Introduced Cal-Mag (4 ml/Gal) Plants grown approximately .5 inches in height - 2.5 -3.0 inches in width Light Intensity 100% *End of week recap* (08/20) Both have grown about 1 - 1.5 inches in height and 2 - 2.5 inches in width. Fan leafs deep lushes green Bud sites topped Thus far all is running smoothly.
Likes
14
Share
Week 9 Update – Pushing Limits 🌿 Everything is running as it should, but AN#3 is completely maxed out—there’s no more room left in the tent. One thing is clear, though: the difference in stem thickness between BioBizz#1 and AN#4 is striking, likely due to Rhino Skin. AN#4 is also developing a gorgeous layer of frost as expected. ❄️ BioBizz#1 – BT35 The CalMag issue is fully under control now—she’s getting 140/40 and shows no visible deficiencies anymore. Overall, she’s in great shape! AN#4 – BT35 There’s a minor calcium deficiency visible on one leaf, but at this stage, it’s not a concern. Advanced Nutrients CalMag Xtra is doing its job well at 1ml/L. EC: 2.4 pH: 6.5 Drain: pH 6.1 (EC not measurable due to organic soil). AN#3 – BT31 She’s lagging slightly behind the others, though she should be further along. This is due to suboptimal conditions—she’s far too close to the light, and there’s nothing I can do about it. Supercropping is nearing its limits, but thankfully, vertical growth has almost stopped! EC: 2.4 pH: 6.5 Drain: pH 6.1 (EC not measurable due to organic soil).
Likes
5
Share
Likes
1
Share
Holky jsou na začátku 7 týdne květu. Začínají silně vonět a palice jsou krásně pocukrované . Trichomi většina ještě průhledná.
Likes
16
Share
Not much to say 🤷‍♂️ I don’t just need a male at the moment.
Likes
73
Share
@Roberts
Follow
Lilly x White Widow is doing good. She has finished, and is ripening well. I am just a little past when I would like to cut her. I am waiting on space in Cannatrol. So I have to cycle them in to it in 8 day gaps. Her next update will be her Harvest. I did reduce the light strength on the Spider Farmer G5000/UVR40 lights to 60 percent. She is just riding out her time flushing to her cut date. Thank you Spider Farmer, Athena, and Ripper Seeds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g Spider Farmer Official Website Links: US&Worldwide: https://www.spider-farmer.com CA: https://spiderfarmer.ca UK: https://spiderfarmer.co.uk EU: https://spiderfarmer.eu AU: https://spiderfarmer.com.au G5000 Light Amazon Link: amzn.to/4643esa UVR 40: https://www.amazon.com/dp/B0BR7SGTHS Discount code: saveurcash (Stackable)
Likes
10
Share
Week starting 4/10/2019 Spotted a few aphids today on some of the yellowing leaves - confirmed with the magnifying glass. Humidity continues to be an issue as I cannot seem to lower it below 60% at best, averaging 65%. The extraction currently is pulling the air from the tent into the room - will need to look into taking it outside of the house before looking at dehumidifiers. White powdery mildew is more prevalent on some of the tops. Manually wiping them off with a wet cloth each day. 05/10 - Applied nematodes today to all 4 pots (https://www.biogroei.fr/stenema). Had to apply it with water at pH6.5 08/10 - Watered all 4 plants to keep the soil moist for the nematodes. #1 08/10 - Watered at pH6.3 at 17 deg 10/10 - Feed of Vega at pH6.4 at 19.8 deg, EC 1.84 - still seems stunted during flowering and behind the others of same strain by a week or two. #2 08/10 - Watered at pH6.3 at 17 deg 10/10 - Feed of Vega at pH6.4 at 19.8 deg, EC 1.84 (pot was not dry yet, should have waited another day or two with feeding) - colas are still developing nicely whilst continuing with the leaf loss. - defoliated and cut all small branches with flowers at the bottom. #3 08/10 - Watered at pH6.3 at 17 deg 10/10 - Feed of Vega at pH6.4 at 19.8 deg, EC 1.84 (pot was not dry yet, should have waited another day or two with feeding) - a few curled/twisted leaves. Continues to need the most frequent watering - most probably due to the limited 7L pot. #4 08/10 - Watered at pH6.3 at 17 deg - is not drinking a lot of water compared to the other 3 G13 Haze strains. - getting close to harvest time, still not showing big signs of nutrient deficiencies or other issues. Some purple leaves at the very top of the main cola.
Likes
17
Share
@4chuk
Follow
Oct. 09 - Week 1 begins. Oct. 12 - Can almost watch it grow. Oct. 13 - Photo update. Gave 70ml nutrient solution. Time lapse uploaded. Oct. 14 - I have moved the tiny pot to the "cold room" which ranges between 17 and 20°C depending if the door is open or closed. Hopefully this stunts her a little. A preview of the light I put together a couple years ago in which I plan to use. It consists of a Makers LED Slim heatsink, an Arctic 120mm fan, 4 Cree XT-E 5000K, 9 Cree XT-E 3000K driven by a MeanWell LDH-45A-1050 driver and powered with a MeanWell GST90A12-P1M power supply. Being driven at 1050mA each LED runs a bit less than 3.5 watts for a total of around 45 watts. The heatsink becomes warm to the touch but far from hot. If you look closely, some of the red wire has become white on the side exposed to the light, so they're pretty powerful diodes. I use other lights I've assembled, both identical and similar to this one for some of my succulents and cacti which respond very well, the one cactus is growing at an amazing rate. Time lapse videos should be considerably better now since the new location is much lower traffic and I've learned how to stitch the photos together using PhotoShop in a much simpler way than how I had done it with iMovie. I'm pretty new to making time lapse videos so there are going to be some mistakes. I also have figured roughly how long my batteries last (2 days) so I switch them every other day.
Likes
6
Share
@Ryno1990
Follow
Purple Lemonade from fast buds comming in nice on week 1 of veg she is missing one of her first leaves so looks a little funny but growing more every day under this fold 6 from medic grow
Likes
6
Share
Some problems solved, by ph's water regulation and cutting some sick leaves.
Likes
10
Share
@Rangaku
Follow
Looking healthy as , getting sticky and phat and real nice distinct smell . Feeding her up and watch her go same same next week
Likes
21
Share
@NSABND
Follow
Start of week 7 Day 51 was the hottest Day ever 😫
Likes
41
Share
@Reyden
Follow
Le ragazze sono da oggi a 14h di luce e tra qualche giorno andranno a 12/12, ieri ho prelevato un clone dalla Purple Lemonade e uno dalla Gorilla Cookies, oltre a 2 cloni dalla mia pianta senza nome che sarà una grande sorpresa in tutti i sensi! Che sia maschio, femmina, o una mezza specie! A noi piacciono le sorprese fatte bene 😌