Likes
Comments
Share
@Zucca
Follow
Plant #1, 2, 3 and 4, which undergone main-lining, are taller (105cm) than plant #5 (90cm) which didn't. Instead plant #5 shows flowers slightly bigger than the other plants. All the plants are in good health. I cut few yellow leaves on the lower branches and add some soil near the plant trunk because, due to watering, some of the top roots were not covered anymore. Smell it is not so strong but after having touch the plants, hands are quite scented
Likes
28
Share
Likes
84
Share
@Terp1
Follow
08.06.2023 Tag 34 - die Woche regnet es nur und ich habe Probleme die RH zu halten. 65-70% erreicht sie durchschnittlich gerade. - an #2 teste ich agressive Entlaubung "bud focused defoliation" -> bin auf das Ergebnis sehr gespannt 09.06.2023 Tag 35 - Luftfeuchtigkeit bei 65% @ 27°C -> passt eigentlich im VPD und die Pflanze fängt ja gerade erst an zu blühen - Morgen ist Blütewoche 1 <3 - aus dem Dreieck ist irgendwie nix geworden aber ich lass die sich erstmal strecken
Likes
5
Share
@Deli_Weed
Follow
Esta semana engordaron bastante las flores, los últimos dos dias de esta semana deje de regar con nutrientes, pura agua 🚿 para empezar el flush
Likes
30
Share
Hello Diary. Sherbet Queen has entered the first week of flowering. It has grown over 70 cm and is very branched and full of leaves. So on the 28th day I cleaned it up a bit. I removed the leaves and branches at the bottom of the stem, now the air flow through the plant itself will be much better. The plant is very nicely shaped with a solid stalk, the flowers began to form at the ends of the branches. Watering has become more frequent, every two days I water with about 2 liters of water. This week I added only one Easy Bloom Booster tablet to stimulate flowering and I adjusted the p.H to a value around 6.3 and at one watering I added CalMg preventively. The conditions on the Farm are in line with the summer months. The temperature is slightly higher, 28 degrees and the humidity is around 50%. It is expected that the temperature will increase in the coming time, considering the temperatures during the summer. I also changed the light mode, I put 4 hours of darkness and 20 hours of light. For now, Sherbet Queen looks beautiful, happy and proud. Here’s what it looked like last week. 08/06/2021 - Day 24. Watering. I put one Easy Bloom Booster tablet in 6 liters of water and lowered the pH to 6.5. With that, I evenly watered all three plants that are on the “Farm”. Since the last watering was three days ago, the branches and leaves were very droopy which is an indication that they were very very thirsty. Temp / Humidity on the farm - 27.5 degrees and 45% humidity. 10/06/2021 - Day 26. Watering. I prepared 7 lit, lowered the p.H to 6.2 and did not add any other nutrients. 12/06/2021 - Day 28. End of the fourth week. I did defoliation on all three plants on the “Farm,” so did Sherbet Queen. I think a new look will suit her. I photographed the plants, measured the height and then watered them. This time I added 1.5ml / lit of CalMg preventively. That’s it for this week, see you soon.
Likes
35
Share
@madlangs
Follow
All is going ok and growing fast. Was underfeeding a bit and was a bit close to the lights and giving a bit of light stress and turning leaves pale green near the top half of the plants. EDIT I think plants was going pale because they was underfed and not to close to the light? 3.10.21 Dg 4L Wc. 3.5L Gb 3.5L Gave all 4L week 1 flower. Silica and calmag 0.3mlL ph 5.10.21 Dg. 3L Wc 3L Gb 3L Chem 3.3L Hubba3L Cream.3.5L Gave all half strength week one flower apart from dg and gb they got same but full strength grow and bloom. Silica 1mlL. Recharge and mammoth p calmag 0.3mlL ph6.3 apart from dg and gb ph6.1 5.10.21. Light 110cm and 60cm 6.10.21 moved lumatek light up to 78cm and turned down to 60% gb xl leaves was taco-in and burning a bit. Was getting the crossover light from both lights 6.10.21 sprayed boom boom spray on all. 7.10.21 Dg 3L Wc 2.5L Gb 2.5L Chem 2.5 Cream. 2.5 Gave all week 1 flower full strength with fish mix instead off grow. recharge calmag 0.3mlL silica 1mlL Orange. 1 2.0 0range 2 2.5 Hubba 1.5 Gave all full strength veg calmag 0.3mlL no recharge silica 1mlL ph6.3 7.10.21 light height spectrum king 130cm. Lumatek 106cm 9.10.21 Dg 3L Wc 3L Gb 3.5L Chem 3L Cream. 3.5L Hubba 3L Gave all full strength week 2 fish mix instead off grow flower. Silica 1mlL calmag 0.3ml l/L 9.10.21 Dg 57.5cm Wc 49cm Gb 47cm Chem 51cm Cream. 45cm Hubba 33.5cm Orange. 1 22cm 0range 2 31cm
Likes
10
Share
Certainly last week of growth, NL is short and made of large and beautiful intense green leaves well formed. This week I stop the Start Booster. Light fragrance of greenery.
Likes
12
Share
@PapasGrow
Follow
Tent from Mars Hydro Factory (3,3'x3,3') 🏕️ Powered by Mars Hydro LED FC 3000 🐙🚀 Www.Mars-Hydro.com Super Lemon Haze CBD from clone 🍋 Genetics from Green House Seeds 🌿 Seed from seedbank.ge Flowering week 3 ✅ Strain Hunters/solo cup grow project 🌴 Nutrients: Green House Feeding Hybrids powder 🎊 CalMag+, Hydroguard and Silica Blast from Botanicare 💦
Likes
111
Share
Harvesting An ELEPHANT !!! And after 118 day from seed and 101 from wen she started her mix veg/flowering process, i cant say for sure but i am starting to believe that this auto world do veg, then veg and flower in conjunction for a wile and only after they a wile they move to a flowering stage completely but thats another post another day lol today was harvest day for this Auto Elephant from SSSC , and let me tel you she is a delight with huge fruits, so big that i normally cut and hang the all plant and for this i did not take the risk of doing that and getting bud rot , better safe than sorry, so what i broke her in smaller peaces and put it all in the rack. Now not much to do than waiting for it to get around 10/15% humidity and jar with it all. This one as you guys can see from the video , this is a full covered in trichomes BIG MAMA and touching her is like touching super glue or something lol i was trying to put all the colas in one picture , but is simply just not possible , they all look great so i selected 4 of them for a true back back ground <3 Thank you Super Sativa Seed Club for this opportunity, i fell like a champion no matter what with this 2 Mamas, much respect on the work you guys did on this Elephant As always thank you all for stoping by for your love and for it all, i fell humble and honored
Likes
Comments
Share
Starting to fill out nice now, slowed down on the feed now about every 2 days the coco dries out. Smell is strong!
Likes
10
Share
Marshydro lo mejor en luz una buena invercion. Este cultivo es sólo con agua 6.5 a 7 Ph.
Likes
1
Share
@GnomeMoe
Follow
Starting into Week 7 Flower, week 13 total Mandarin Cookies smelling out of this world! Very nice and sparkling trichs! Silver Kush #1 is filling in and getting some nice buds, #2 is pretty far behind. I’ve got a feeling #2 might be destined for the hash bag. Not much weight on that little lady yet. 3 - Madarin Cookies are two in back and one in center; 2 - Silver Kush are two up front; 2 gallons water/nutes per 5 plants, alternating with plain water (just calmag, malassis, Ph. 6.4) every other day. Ph.6.4 (1.5 C.F.) Fox Farm Ocean Forest, mixed with (1.5 C.F.) garden soil, fills (5) 5 galllon fabric pots perfectly. (50/50 mix.) Again, The new version of Spider Farmer SF-4000 is an awesome light, for anyone wondering. Can’t say enough good things about this light! This is my first LED, so still trying to figure it all out. I ended up moving the light higher up, to about 18” from the highest buds, to stop the curing and mild heat stress. Power outage was a long few days, but the plants seem to be bouncing right back from it. Quality doesn’t seem affected, but end weight might have been hurt slightly. Oh well... what can ya do!
Processing
Likes
19
Share
2018-04-10 Day 1 I gave the girls water and nutrients yesterday so nothing to drink today. Turned them 90 degrees today, to give my girls as much lightexposure as possible. The flowers get bigger and bigger for each day, Overall the ladies look really good, the colors are very nice, they look healthy. Somehow the photos of nr1 got lost, very strange, but great pics of nr2. Also added videos of them both. Power Plant XL nr 1 is 67 cm Power Plant XL nr 2 is 68 cm ------------------------------------------------------------------------------------------------------------------------------------ Strain information Genetics for the famous Power Plant were captured by a group of Dutch growers on a trip to South Africa, back in the 90’s. They managed to breed a strain that was soon a popular choice in coffee shops of the Netherlands, most likely due to the soaring and intense Sativa high. Zambeza Seeds thought that the productiveness of Power Plant should never be forgotten and created an updated version, to bring the legend back to live. Power Plant XL yields up to 600-750g/m² in a flowering period of approximately 55 days! The efficiency and productiveness of Power Plant XL fears no comparison with many recently bred cannabis strains. Indoor heights of 80-110cm make this sativa-dominant variety relatively easy to grow, but outdoor growers need to be aware of the power that is being released under the sun. Outdoor plants can easily reach heights of 150-200cm, and yields of 500-600g per plant. The taste of Power Plant XL can be described as a delightful blend of sweet and sour flavours, with subtle hints of pine tree in the background. Smokers who appreciate a very strong and uplifting Sativa high will be more than satisfied with the effects. One will experience feelings of euphoria that are definitely intense and uplifting, typical for a South African Sativa like this. The up-high can also evolve into being more relaxed, especially when larger quantities are being consumed. Some people suspect Power Plant to be grown in large commercial operations around the world. It doesn’t really matter if these assumptions are the truth or myths, but Zambeza’s breeders are very proud to bring this highly productive legend back to live. The updated version of it, Power Plant XL, is the most efficient Dutch "bud factory" money can buy. -------------------------------------------------------------------------------------------
Likes
25
Share
@Agrocann
Follow
Harvest! Few comments about a process and harvest. It was easy to grow, no mold, no nutrients issues- looks like a process was smooth. Do not know about the yield - will check after drying.... but it is looks like the yield will not be high. The lady was big, but the lights probably was not so efficient. The light were able to penetrate the third of the height so everything below it is a lax popcorn. After drying will add comments about the weight! Thank you for your comments!
Likes
23
Share
Small update Everything is going pretty well, nothing has really changed accept size. Still feeding through the autopot system. Nutrients have been upped slightly to 3ml per litre I think they are ready to flip over now but not sure wether to put them into a scrog for another week. They are pretty low and bushy on there own but I’m not sure if they would benefit from a lot of defoliation and lollipopping as the plants aren’t very tall anyway.
Likes
Comments
Share
Likes
8
Share
Things are getting good now.i haven't had any issues this week.i p.h my water and feeding at 6.4.i did a little flush to get rid of any build up there might be in my soil .I did feed this week with advanced connessiour bloom a and b one time with some b52.
Likes
5
Share
Sacitrus Bomb Auto 🌱 22/08/2024 Ph: 6.2 ≈ 24°C 3Days later (25/08) planted the seed that has has 1cm root. Feel free to leave any tips, thoughts, general input! Always keen to grow myself 😎