The Grow Awards 2026 🏆
Likes
Comments
Share
Day 94 - today the temperature inside the tent dropped to 10-12 degrees Celsius. So it's harvest time. I trimmed almost all the leaves and hung the plant in a dark place to dry at a temperature of 12 degrees. This is not enough, but unfortunately there are no other conditions. Drying may take longer than the usual 10-12 days. The plant itself has stretched almost a meter in height, the roots are also impressive.
Likes
8
Share
@Fuzzel
Follow
#3 getting harvested soon. Deofliated sixty-some leaves from green to yellow and then went into the dark for 48h. #2 is still gonna take a few weeks, Lots of nutes to slow down yellowing of the leaves. She will probably end up quite fluffy
Likes
18
Share
Buena germinación 3/3 Grtminadas en grilletes humedad dentro de un tipper y en 2 dias puesta sobre en tierra.
Likes
3
Share
Loved growing. Definitely one of the best buds i have smoked. Trimming was enjoyable.
Likes
8
Share
@Piro420
Follow
Triming a bunch of leaves and branches 10mins in morning ten at night before co2 kicks on. I flipped sooner then normal because they where very aggressive. And they are hitting the lights at day 21 :( I was able to to creep the light up 3 inches with some temporary straps touching the light. I hope that 3 inches is all I need (that's what she said).. Otherwise plant is amazingly aggressive and smelly lots of tops and sites..
Likes
8
Share
@Smokwiri
Follow
Welcome to my ICE cool Auto diary by Sweet seeds Leaf is normal now, last week was a bit cold better weather started today and will stay that way for some time let's wait for coming weeks development 12.6.2020: Received some new seeds from Sweet seeds, looks great
Likes
136
Share
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 1/22/22 6th week of veg!!! 💚💡🌱 Lots of growth in the last 2-3days, color looks great a couple twisted leaves on #4 but nothing major..we've removed a large fan for better light penetration on #1 & #2..temps have been awesome since the weather changed, plants are loving the intense light and mild climate. We have no real game plan for flower (besides not getting overgrown lol) but size will definitely determine when we flip.. I would assume 2 more weeks at this rate of growth but time will tell.. everyone is eating a little with every watering now (water only every 3rd/4th) and things look great! (for now lol)..Thanks as always for dropping by and happy harvests everyone!! 🌱😽💨 ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: >50k hrs ⌛ Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 Weight: 10.1 lbs (4.6kg) -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 15 can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 1/24/22 We've been running the MarsHydro at 29" this entire grow (found my tape measure lol) and the node spacing is still really tight, I assume there's a lot more red in SP-3000 than lights we've used in the past, at 29" these little plants have side stems as fat as pencils..We plan to keep the light at this distance all thru veg and we'll begin lowering it at the start of flower...plants are coming along nicely, much more growth in the last few days than the previous week. I'm REALLY excited for this grow..I think the SP-3000 will deliver us a half lb or more of Bruce Banger with very little effort..I couldn't be more in love with this setup.... .....until i buy my 2nd SP-3000 that is 😸 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_
Likes
37
Share
@kakanero
Follow
I am very satisfied with the course and I hope it will continue to be successful!! :) Do you have any comments?
Likes
25
Share
Cresando auto first time growing her and won't be my last. Final product is killer smells so dank. Diesel with some fruits. Can smell the cookies for sure ☺️. Ethos again did a great job making these autos for sure. Will update more as the weeks go by.
Likes
4
Share
I kept on doing buisness as usual. Thought I would defoliate less, but there are still so many leafs and so many growing. So mid week I got rid of a lot of leafs. The flowers really started going off this week and the plants get more and more sticky. The plants did quite the stretch and I might have to put the ventilation system out of the grow tent next week. The plant in the top right corner was a little more yellowish and had a burnt tips so this week I only gave her water. All plants got water between 6.0 -6.3 to compensate the high run off from last week.
Likes
39
Share
@Mastr
Follow
This week I start using atami bloombastic recommended by local professionals grower who always grow best quality 👌 So he advice me to use bloombastic last 4week off flower start with .5 ml per litre then increase to ml and he said last week before chop only feed her with bloombastic and water nothing else then flush for 3 or 4 days I will do that and let you guys know the final result Day 61 and orange sherbat seems start accelerate on fatten up hope she produce big nugs coz one orange sherbat is stooned and bud stay very very small (I don't take pic off her either)but can see it in grow questions
Likes
78
Share
@Wastent91
Follow
La ragazza era partita male.. ma grazie alla costanza e ai giusti accorgimenti è diventata una bestia di qualità! Ricordo che è tutto organico !
Likes
44
Share
Thanks for checking out my grow! This is the 4th or 5th strain I’ve ran by 34 Street Seed Co. I have yet to be disappointed, great genetics for a fair price. This Pink Lemonade strain has tested in the 30% cannabinoid range with crazy terps, all from other Home Growers! This will be one of my submissions for the 2023- 34 Street Grow Cup, Can’t wait 🇨🇦👊❤️ I started as usual by soaking my seeds for about 6 hours in a glass of distilled water, then planted directly into the substrate about a 1/2 inch into the starter pot. I dialed my light back to about 100 watts from the wall, and raised it to about 40 inches above the pots. I covered the pots with domes, and set my humidifier to run non-stop. 30 hours later , they had all sprouted ❤️
Likes
19
Share
Let’s Go Day 22 from seed for these 5 Ogreberry Autos from @twenty20mendocino and Bruce Banner from @fastbudsgenetics !! Today we turned the Scorpion up to full power and raised it to 38 1/2 inches above pots and getting a reading of 520 - 530 par ! gonna let the babies grow into the light now over the next few weeks till they hit into flower an keep a steady eye on it Incase I got to raise the light higher or lower !! Air temp an humidity has been great , stayin from 70-75 degrees through the day an humidity is staying around 58% ! So far so good Let’s grow lil Babies let’s grow!!! Hope you all enjoy an are ready for another amazing week ! Peace love an positive vibes to all you Growmies out there Cheers 😶‍🌫️💨💨💨💨💨🤙🏻keep them eyes peeled for next week y’all !! If there’s any questions please ask me ! Thank you all. 💚💯
Likes
80
Share
@Hawkbo
Follow
The pics and videos are from day 37 of flower. All 3 of these are starting to beef up a little bit, they have perfect bud structures. I'm picking up a creamy kinda vanilla smell on them each having slight variations but what do I know? I really want to grow all 3 phenos again sincenmy clone runs always seem to be just a little bit better. I said this on my last post but for anyone droppin questions in my DMs just comment on a journal I dont go thru the dms its alot of the same questions over and over. That way anyone can see the questions and responses and I'll try to do a better job at responding to comments as well. I always have so many diaries going at once I rarely stop and read them all until the very end when things slow down. Hope everyone had a happy halloween3👊
Likes
5
Share
love this strain big feeder and loved the super soil. I would run these again if i had the Chace goo yield for an auto flower. had 2 different pheno types one vert sativa the others Indica heavy.
Processing
Likes
13
Share
July 19: Hi guys and girls, that past has been an interesting week. I have already collected a Cream Cookies and a Zkittlez from the 420 FastBuds and can report the first report in the C.C.C. The other plants grow strong and others are almost ready to be harvested. For example, the Zkittlez that has completed its flowering under the LED lamp is already receiving only water like a second cream Cookies. I must say that comparing the plants grown and flowered under the HPS lamp and the LED lamp I don't find many differences, both plants have produced very dense and resinous buds. As you can also read in my journal C.C.C. both the Cream Cookies and the Zkittlez become part of my favorite varieties 😉 In the pictures you can see how the LSD-25 is a real purple variety. At his side is the Purple Glam Kush from BulkSeeds, which has nothing in purple except the name, but which is producing a considerable amount of buds with the latter plant. Back on the LSD-25 I have to admit that it is really beautiful and the photos don't do it justice. In the future I will make better ones. The Lemon AK and the Six Shooter have grown considerably in height and for this reason I have practiced the FIM with other smaller plants. July 24: This week I tried for the first time to make a resin extract using the BHO system, although instead of Butane I used Dimetyl Ether, a gas made for this kind of extractions made by Daxso. For many years I have used waste to make good hashish using the ice-olator method (water ice and sieves) and recently I also bought a bubbler machine because I am lazy 😆 In recent months, however, I have seen many videos on Youtube of people who made high quality resins with the BHO system and I decided to try. I purchased and used a 50 cm extractor, but I've already bought another one smaller than 30 cm that I want to fill with just buds. I made my first excerpt and could follow the steps in the video I uploaded. Unfortunately to smoke I will have to wait until next week when my new Focus V Card V2 arrives, but as soon as I get there I will keep you updated 😋