02/07 - Prepped for cloning - applied heavy defoliation - isolated clone cuttings - prepping 15 clones for 4x4 - running mother in veg for about 3 maybe 4 more weeks then flipping into flower (02/25). 02/09 - (C) - Clone (Trim) process complete - 15 clones in 2x2 (Nursery) moving forward I will be splitting the updates between "Mother & Clones - Update will be reported as follows exp * 02/09 (C) (Clones) * 02/09 (M) (Mother) 02/09 (M) - Trimmed her down yesterday - removed LARF - Clipped 15 clones - Thus far HST shock was been negated. 02/09 (C) - Clones dropped in double solo cups for prop - currently in nursery (2x2) alone - Running mid temps high humidity - Clone medium - Coco Perlite Worm Castings Amendments - Raw NPK Silica Raw NPK Microbes Element Myco+ Clonex Rooting Gel Foliar mist - Clonex Mist

I love growing its a big passion of mine , and the fact that GD exists makes everything so much better, one can interact with others and enjoy and learn from each others. Thank you all growers love and keep them green <3 <3 <3

The pk tea is doing well i feel that my plants are going and for week 7 and the conditions that i have iam ok Good week in the end i add one ufo 150w led to reach better the crops

🙏 Big thanks to Plagron and Zamnesia for putting on the Eternity Grow Cup 2025. This kind of platform means a lot to the community. The chance to push our grows, test out new techniques, and connect with other cultivators from all over has been inspiring. Appreciate the love and effort that went into making this event happen! Hope everyone enjoyed looking over my shoulder on this grow and best of luck to all participants! REVIEW - Runtz (fem., photo.) from Zamnesia: ⬛⬛⬛⬛⬛⬛⬛⬛⬜⬜ The seeds from Zamnesia germinated rapidly, rooted strongly, went wild in veg, and produced an ample amount of high-quality medicinal flower. The diary speaks for itself on that front so this space will be more of a phenotype review. The plants were labelled A, B, and C from left to right respectively in photos. A and B were the 'clasicaly-appearing' sativa-esque leaves while C was the more 'indica-appearing' phenotype. Although A and B appear the same qualitatively, they did produce substantially different amounts of flower (despite their DLI being near max out for the entire tent footprint without supplementing CO2, so I do not think just being in the middle attributed to this). Past their different yields, A and B also have vastly different profiles. A is a classic gelato/ice cream cooler/Z terps, and my personal favorite of the plants (wish I had taken a clone of this one instead). B is the most on point for what I think of with Runtz, classic Z terps but with a slight tropical/rotten/sweetness to it. C had the misfortune of being ready to chop a little earlier than the other girls so her profile is mostly just spicey kush now. I did observe intersex flower sites but given the entire context of the diary and how the plants performed, I have to assume it was user error. No pollination observed in any of the flowers, as zero additional intersex sites occurred. The distinction between A, B and C is what I would expect from a typical F1 cannabis seed. I do not enjoy growing from seed much but these girls were manageable. Add to that the relative stability of the genetics for a Runtz recreation, and well, these are good quality beans for a great price. Not only is Zamnesia responsive and available, their confidence speaks volumes. How many vendors would have an in-house Runtz, knowing how much of a genetic-gravity-well it is in, and be confident enough to let ~200 randos grow it and show it? REVIEW - Green Sensation from Plagron: ⬛⬛⬛⬛⬛⬛⬛⬛⬜⬜ I enjoyed using the green sensation, the NPK values on it make it versatile in application and a power-house in flower. I can't say I noticed anything better or dramatically improved, although comparing to Heavy 16 and asking for a marked improvement is big ask in my opinion. What I was able to do was seamlessly integrate the Green Sensation into my current routine. The additive stayed homogenous, was easily introduced into solutions with no adverse impact to the water contents or pH. Most importantly, the plants enjoyed the additive and it did accomplish the main goal of being able to wane off your primary line. In this respect, by using Green Sensation I was able to save resources by lowering my Heavy 16 inputs across the board approximately 50% and supplementing with Plagron's Green Sensation.

not sure where the dry weight thing went but i dont fill in wet weight. who even weighs there whole plant? dry yield is 269gram of pure bud. Grown in a 22liter pot with biobizz lightmix soil and greenhousefeeding bio line this smells so hard that my neigbor called the cops. she even smelled it in her apartment so its game over for me because off this plant. never came across such a weed smelling strain in the 8 years that im growing. hope to be back in 6 months or so.

Week 4 of flower just started, Everything is under control, I gradually remove bigger fan leaves as I want as much light on buds as possible, I’ve added small led at the pot level shining upwards on all the popcorn buds, just testing this idea. Any one tried that before ? I’ve decided to transplant all the plants in veg into final 11l pots, 2 smartpots and 3 airpots (no point for bigger pots since they are clones and don’t develop big roots), Another 4 weeks on veg, flip on cfl and then I’ll be moving them straight under 12/12 cmh In a week I’ll be sprouting new seeds from RQS - Kush - Medical mass - AK47 - Cheese Hopping for baby gorilla to spread her wings quicker, she is very shy ☺️ Have a nice weekend folks

🤙🏻Todo ok! Las hice una defoliación,en esta semana aplicaré la tercera y ultima dosis via riego de Delta9. 🚀 •Preflorando super.

24.10 D74 LM Harvest day✂️

Off to a good start 2/3 seeds popped but starting another one and hopefully it’ll follow a week or so behind these two. Have a few purple gelatos flowering beside these a week or so out from harvest for and then I’ll be acclimating the room fully towards these two :)

The plant is looking great, there isn’t much to say. The weather has been a great help on this grow, and apart from the little N over feeding all is looking good. Buds are starting to get FAAT.

Oct.7 day 68 buds are still stacking and getting harder every day & trichomes on all plants are now milky except for Trainwreck #2 which has turned into a long flowering sativa. Powdery mildew has gotten a little out of control on most of the potted girls so I started the long & tedious task of harvesting 1 plant per day starting with Blue Fire #1. Being a one-man operation I’m not looking forward to all the work that lies ahead however judging by the look and smell of these babies, should be well worth it in the end. Oct.8 day 69 cut down all the main colas on Blue Fire #2 & Strawberry Banana #2. Giving the lower branches a few more days to finish then chop chop and into the freezer. 😜😁👌 Oct.10 day 71 cut down all the main colas on Godfather OG #2 and keeping the rest for fresh frozen water hash. Also started trimming Godfather OG #1 eight days after she was harvested. First time drying in the garage which is detached from the house and is not insulated. Average temps in there this week were low 50's-60's F and 55-70% humidity. My concern was temps being too low and the fluctuating humidity. So far after eight days of hang drying in the garage with 2 small fans lighty blowing directly on the colas, God father OG #1 was dry and ready for final trim. That worked out better than I hoped. 🙌 Oct.11 day 72 Trainwreck #2 got chopped whole and is hanging. I would normally trim it up quite a bit before hang drying but I need a break today. Oct.12 day 73 Strawberry Banana #1 finally got chopped today. I shot a video of it in time lapse which compresses my five hour chop time to about one minute. That concludes the harvest of all my outdoor girls this season. Stay tuned for more photos, final weights and reviews. ...till next time Thanks for stopping by See ya and stay safe

A lil nite burn shown on both of the ladies but they will be getting no more nutes they are in there final 2 weeks in my opinion and so they should be showing me amber tricombs anytime now.

The middle and end of week 7… it all seems to be going smooth 🤞🏽👌🏽 #4h02o

**Encontrarás la traducción a español al final de la descripción** From/Desde: 10/05/19 || To/Hasta: 16/05/19 From day/Desde día: 78 || To day/Hasta día: 84 You can find the Money Maker Diary here: ** Podéis encontrar el diario de las Money Maker aquí:** https://growdiaries.com/diaries/25667-gorillamakingmoney-gorilla-vs-money-m -----IMAGES & VIDEOS----- 5 - HomeMade Organic & Cheap CO2 generator (more info in week summary) 9, 10, 11 & 12: The bud on the right is a Gorilla one, the buds in the left or/and in the middle are Money Maker ones. 15 - Same Gorilla plant buds, one affected by CO2 in the roots and the other not. -----WEEK SUMMARY----- The smell is more sweet and intense every day, friends that came home turned them eyes into crystals when they see this little babys. The size isn't awesome, but the high ammount of buds full of crystals plus the strong sweet aroma makes them awesome. Buds are growing and fattenning very very well. This week i added a boost of HomeMade CO2, i never measured the results of this invention so i can't give CO2 measurements. This method is widely used in home aquariums and there is where it comes from. For those interested i'm going to write here more detailed instructions. The 4 liters i've made will last for about 2 weeks. ---NEEDINGS--- - 250 ml Bottle - 6~10 l Bottle - 400 g Sugar / l water - 1 Envelope of organic baker's yeast / l water (CHEMICAL WILL NOT WORK) - 3 mid plastic tubes 40~50 cm - 1 short plastic tube 5~6 cm - 4 tube adapters - Hot glue to seal adapters The process of creating CO2 is simple, mix water, organic yeast and sugar in a bottle, and the sugar will free CO2 in the process of fermenting to alcohol due to the yeast. 1. Make a hole in the center of the big bottle cap, insert an adapter and secure it with hot glue 2. Make 3 holes in the small bottle cap and glue the other 3 adapters 3. Link both caps with one of the mid tubes and insert the other tubes on free adapters 4. Insert a short tube in the bottom of the small cap in the adapter that came from the big cap 5. Watch the Video!! -----WATERING CALENDAR----- Plants are beginning to drain the pots a bit faster so from now on i will raise the water ammount on each watering day 0.25 l. 11/05/19 - 1,5 l with All week nutrients -(Nirvana & Blombastic) also Big Bud half dosed @ PH6.4 & 2 E.C. 14/05/19 - 1,5 l with Bud Candy, Big Bud, Nirvana, B52, Bud Factor-X, Sensizym & Blombastic @ PH6.4 & 1.5 E.C. *****ESPAÑOL***** -----IMÁGENES Y VÍDEOS----- 5: Generador de CO2 casero, barato y orgánico (más info en el sumario semanal) 9, 10, 11 & 12: El cogollo que sale a la derecha es de una Gorila, el de la izquierda y/o el de en medio son de una Money Maker 15: Dos cogollos de la misma planta, uno afectado por CO2 en las raíces y el otro no -----SUMARIO SEMANAL----- El olor es más dulce e intenso día a día, los amigos que vienen a casa a verlas se quedan ojipláticos al verlas. El tamaño no es una maravilla, pero la gran cantidad de cogollos llenos de cristales añadido al aroma que entra por las fosas nasales las hacen increíbles. Los cogollos crecen y engordan de maravilla. Esta semana he añadido un boost de CO2 casero, nunca he hecho mediciones de los resultados por lo que no puedo darlas. Este método es ampliamente usado en peceras caseras y de ahí saqué la idea. Para aquellos interesados dejo aquí instrucciones más detalladas. Con los 4 litros de agua que he preparado yo da para unas 2 semanas. ---NECESITAMOS--- - Botella de 250 ml - Botella de 5 a 10 litros - 400 g de azúcar por litro de agua - 1 sobre de levadura de postre orgánica (LA QUÍMICA NO FUNCIONARÁ) - 3 tubos de plástico de tamaño medio 40~50 cm - 1 tubo de plástico de tamaño pequeño 5~6 cm - 4 adaptadores para los tubos - Cola caliente para pegar y sellar los adaptadores El proceso de generar CO2 es simple, mezcla agua, levadura orgánica y azúcar en una botella, y el azúcar liberará CO2 en el proceso de fermentación a alcohol. 1. Haz un agujero en la tapa de la botella grande, inserta un adaptador y séllalo con cola caliente 2. Haz 3 agujeros en el tapón pequeño y haz lo mismo con los otros 3 adaptadores 3. Conecta los 2 tapones con uno de los tubos y conecta los otros 2 tubos a los adaptadores restantes 4. Conecta el tubo pequeño en la parte libre del adaptador del tapón pequeño que viene del tapón grande 5. Mira el vídeo -----CALENDARIO DE RIEGO----- Las platas comienzan a secar los tiestos un poco más rápido, asi que de ahora en adelante incrementaré 250 ml de agua adicionales en cada riego. 11/05/19 - 1,5 l con todos los nutrientes semanales -(Nirvana & Blombastic) BigBud mitad de dosis @ PH6,4 & 2 E.C. 14/05/19 - 1,5 l con Bud Candy, Big Bud, Nirvana, B52, Bud Factor-X, Sensizym y Blombastic @ PH6,4 & 1,5 E.C.

7/13/25 - 7/16/25 Flipped as another strain is gonna be a problem otherwise. Very stumpy and thicc lady, already smells very funky and rotten. Now we wait and see what emerges in flower. 7/17/25 - 7/19/25 One hungry girl, she is on 100% feed rn. And god she stinks, really gives u burning nostrils. I know copycat is a sensitive topic in the breeder world but he knows his shit. I am abaolutely going to get more of his shit.

Rainbow Melon harvest.

20cm growth this week. Flowers are forming and I can see purple on them 😍 The bad news this week is I was bending her lower branches.. trying to spread her out a bit. I've managed to snap both of them! She has been repaired best I can do, so will monitor it over next day or so to see how effective the fix is. I don't hold out much hope for one branch.. Looks like it's wilting already 😞

harvested her long ago , forgot to do anHarvestreport i

The bud development on this strain has been great rock hard buds I mean rock hard really nice quality bud heavy the resin production is super high it’s been cold at night for a week 48 as the low it has this girl oozing with resin very pungent smells of Fuel so dank smells like pine fuel citrus and a touch of skunk I’m very happy with the quality of this strain