Likes
Comments
Share
Having sorted out the PH issue and the salt build up. These girls have enjoyed it so far... I will be looking to stack up each cola as mich as I can so I can yield as much as possible. I'm going short as I know these are high on Sativa. One plant has stretched very high compared to the other
Likes
11
Share
@Jacks_Pot
Follow
The third week started with repotting. I'm using the 14 liter (3.7 gallons) Airmaxx airpots again. The second coblamp was turned on and both lights were dimmed to a total of 132 watt at 48 cm(18.9 inches) from the plants on the first day of the week, giving a DLI of 23. 4 days later the power was raised to 140 watt and the distance was lowered to 45 cm(17.7 inches), giving a DLI of 26.5 and it stayed that way for the rest of the week. The lowest 1 finger leaves and the lowest shoots were removed on day 20. Next week I'm going to top them. Day 15, day of repotting, I gave them 200 ml of ph adjusted tapwater with Plagron Power Roots (ec 0.5 – ph 6.1) each. The next 2 days were dry. Day 18 I gave them 300 ml of ph adjusted tapwater with Plagron nutrients (amounts see above) each. The next 2 days were dry again. On the last day of the week I gave them 400 ml of the same solution they received on day 18. Twice this week I gave them a shower with CannaCure. I added 40 ml to 200 ml tapwater (ph 6) to make the spray solution. Temperatures fluctuated between 21.5 – 26.3 °C (70.7 – 79.3 °F) and humidity between 41 – 84 % That's about it for this week. To be continued... ✌️ ❤️ 😮‍💨 Do you want to grow this strain? 👉 https://www.barneysfarm.us/pineapple-chunk-weed-strain-15 👈
Likes
7
Share
Thanks Pyramid Seeds for your good genetics. Not my first experience with PS, like them so much. I was happy to grow this baby. It my first experience with coco. No pH or ppm meters, nothing just my eyes and feeling whole process. Thanks to ru brend Plantators for good feedings and stims for awesome price. You always can ask me about everything, I'm always in connection.
Likes
15
Share
Our Wurlz F1 hybrids are very, very beautiful, they were as fast as light, in fact it's an understatement to say as fast as light, here we are well below the average in terms of times and above the average in terms of quality, does that seem like little to you? Do some calculations... In 12 months you could do 6 cycles, unlike normal autoflowering plants which take 3 months on average, i.e. 4 cycles per year, knowing how to do 12 divided by 2 and 12 divided by three, right? Here it is... and it's not the only quality of these plants: maintained stability and hermaphroditism will now be a distant memory. Our Wurlz are colourful, full of resin and are about two weeks away from being two months old. Have you ever seen autoflowering plants so advanced at 1 and a half months or so after birth? Beautiful, beautiful, beautiful, big congratulations to Zammi. https://www.zamnesia.io/it/10669-zamnesia-seeds-wurlz-f1-automatic.html Video Reel Coming soon on Sunday Food by Plagron https://plagron.com/en Light www.viparspectra.com/ Tent & Air www.secretjardin.com Music of the week www.radionula.com +++ 432 hz frequencies to keep in line my Girls to Gaia. Site Description ZAMNESIA SEEDS - WURLZ F1 HYBRID AUTOMATIC: EFFECTS TO LEAVE YOUR HEAD IN A WHIRL! As the end product of combining Runtz with Watermelon Candy, Wurlz F1 hybrid Automatic showcases a reliable, uniform, and, above all, easy growing experience. The resulting buds offer mind-blowing flavors and soothing effects, making Wurlz F1 Automatic more than worthy of being on your radar. GROWING WURLZ F1 HYBRID AUTOMATIC As an autoflowering strain, it takes just 9–10 weeks for Wurlz F1 Automatic to move from germination to harvest. Fortunately, there's very little required other than a bit of maintenance along the way. This is partly due to the F1 genetics that make this strain robust and uniform, resulting in plants that reach a similar height and provide a similar (large) yield. Moreover, Wurlz F1 Automatic is highly resistant to disease, pests, and other ailments. Reaching heights of about 65–80cm, Wurlz F1 Automatic is not an overbearing plant and can fit into smaller spaces with zero fuss. Once ready to yield, growers have the potential to see a return in the region of 450–500g/m² indoors and 50–150g/plant outdoors. AROMAS, FLAVORS, AND EFFECTS OF WURLZ F1 HYBRID AUTOMATIC After Wurlz F1 Hybrid Automatic wows you with its easygoing growing experience, the best is yet to come: the smoke test. Teeming with terpenes, this cultivar offers a fruity and candy-like flavor tinged with just a little bit of pine for good measure. In terms of effects, Wurlz F1 Automatic is bolstered by 24% THC and a finely tuned array of cannabinoids, making for a soothing, physically relaxing, and, in larger amounts, couch-locking high. So settle in with some of your favorite friends, snacks, and movies; this is relaxation at its finest. www.zamnesia.io
Likes
1
Share
@BiggaB
Follow
Plant freshly cropped smells very gassy, big trichomes I will post the harvest once dried✌️
Likes
7
Share
These plants are doing quite well in these one gallon pots. I believe I could run a sea of green set up this way
Likes
26
Share
My first grow has been a great learning experience, and I couldn’t be happier with the results. From the reliable BioBizz soil and nutrients to the impressive performance of the Spider Farmer SF 1000, everything worked well together. Each component contributed to a successful harvest, and I’m excited to continue experimenting and improving my setup with new gear and techniques. 💚☀️🤙🏼
Likes
41
Share
Hi guys, some surprises this week. We are now on transition to Flowering period, i have already seen some pre flowers, really smalll. Everything is doing really great , just one plant is with some signals of high fertilization, but nothing critic, its the most small of them. I m watering the plant almost every day, yesterday ( 19/04) i watered with 500ml of water mixed with Bio nova autoflower supermix, and RQS bloom tablets, like 1/8 of tablet per liter. They are drinking a lot now. I will keep every day watering with around 350 - 500 ml per plant, i will vary that according to the plant size and the conditions of the soil. In terms of heat, its doing ok, i added now one more ventilation inside the tent to keep more air moving around the plants. This week, i have also done more LST trainings, really small adjustments, i will do more LST when i start to see big flowers. My plant on the balcony suffered a lot because of my cats ahaha, she is now inside on a window , is recovering but slow growing, she stretched because of lack of light. Today i also decided to switch my main LED 600 W to only red light, only bloom, i was on full spectrum but i will keep for some days on red to give more height to the plant , i also improved the light distance to 70 cm, before was 60 cm. Now the height is around 15 - 20 cm, i want to improve a little the most small ones. Next week, flowering week 😜 I have one doubt , should i defoliate some fan leaves? or that procedure is only on advanced bloom phase ? And should i Keep the Full spectrum, Veg and Bloom LED on, Blue and red. ?
Likes
14
Share
Still just water and some fish shit Jan. 1 Happy New Year welp to start new year off drop my very cheap PH meter in the bucket water and now the readings are off and I probably watered them today with wrong pH water Sour diesel looks cool didn’t water today soil was still moist but the amnesia haze be
Likes
43
Share
@sleeve
Follow
This chocolope took to the LST well. The buds have swelled to massive proportions, I am more than impressed with my first dedicated photo grow. I am definitely a dna genetics fan for good!
Likes
13
Share
JOANNE'S CBD / ROYAL QUEEN SEEDS WEEK #16 OVERALL WEEK #4 FLOWER This week she's doing good no issues thus far. She's starting to grow her buds and she's still stretching a little. Stay Growing!! Thank you for stopping by and taking a look it's much appreciated!! BUDTRAINER.COM BUD CLIPS ROYAL QUEEN SEEDS / JOANNE'S CBD
Likes
517
Share
170g dried buds Mars hydro TS-1000 Increase Yield & Crop Quality in Led Grow Newest SMD Led technology provides the highest Par/Lumen output, makes you get 30% higher yield compare old led lights, can get up to 2.5g/watt yield. Only 150 watts true output so you don't have to check your bill every month. 342 pcs LEDs, more scientifically and energy-efficient! Perfect for 3'x3' (100x100cm) veg stage and 2'x2' (60x60cm) bloom stage https://www.instagram.com/marshydro_aliexpress2/ Peace & love - L.S.T🌟
Likes
22
Share
@420_TRON
Follow
wet trim, nice buds, will update when more details are available --- got 0.3g of crazy scissors hash - vaped a tiny bit of it and the high is amazing 🤩 ---- 11/6/20 started curing & made some RSO of the trimming (~3ml) ---- 11/7/20 made a 2nd batch of RSO (~10ml)
Processing
Likes
8
Share
Forgive me AGAIN I have started logging this actual journal several weeks after I have started the grow, but never the less, I still have dates on photos to help me track the growth so far. I decided this grow that I would try reusing my dirt from the last grow and was able to sterilize it by cooking it in the oven🙌 I did loose a little bit of dirt but decided I would just combine coco coir that I had around with the soil 1:1 to even things out. Week 1 wasn't particularly interesting. This time around I choose to only plant 2 Super Skunk (fem) seeds because I needed have a "do over" with this strain. Last grow (mid flower) I lost control of my plants and I am looking to redeem myself because this strain grew beautifully up until that point. I went ahead and germinated seeds the last week of October and had sprouted seeds by Oct. 31. The first week was pretty typical with the exception of one seedling who's shell was causing the plant difficulty in releasing. For several days I tried to just allow nature take it's course but, then I became incredibly impatient and attempted to remove it myself (BAD MOVE). The whole head snapped off of the fragile seedling and I had to immediately start over. Also the humidity in SOCAL has extremely low (in the teens) which made getting regulating humidity even more challenging. *P.S. I only gave my plants distilled water from a spray bottle to ensure that there was no over watering*
Likes
6
Share
@Flex1
Follow
Day 54 from spout: Did a 4gal compost tea on 4/13 of worm castings, molasses, craft blend (bigger handful), build a flower (smaller amount), and frass for both plants. light/medium amount of defoliation every so often. I am trying not to take too much off at once to limit stress. After seeing how the plant did with topping, i think just bending (LST) branches will have similar results so i dont think i will top again. Scrog net will be on once it gets a little taller so i can really spread her out. Super bushy. Both plants. I feel bad for the one left in a small pot in the corner. I really like how it performed during veg so i might take clones of it a bit more than the main girl. A lot of bending an tucking almost daily. I think i will step up defoliation once the scrog goes on in a week or 2. I am trying to fight impatience but i cannot wait to see what the girls look like in flower. temps stable at high 70s tp 81 or 82F. Humidity i am keeping at mid/high 60s. 30Gal pot doesnt need much watering after the first correction or the last feeding i just did. the smaller potted plant i water once dry (every other day or 2).
Likes
10
Share