This past week has been a struggle. I keep my plants on the balcony during the day and in the grow box during night and I inspect every single of their leaves everytime I move them in or out. A few days ago I noticed some kind of microscopic egg on one of her flowers and then some sort of parasites under her leaves. Since then: panic. I searched for the name of the parasite (acarus) and bought some neem oil which I applied manually on every leaf (to prevent it from going on the flowers) and onto the ground. Since then the parasites are almost gone. But now she has these "sad" leaves, with their points bent down and the margins as well.. I've read different explanations, but I think in my it might be the high temperature and the overwatering, together with the dammed fungus flies. I'll keep going with the neem oil and diminish the water. Apart from all this, her flowers are still growing and producing so much resin🤤

Day 56 of flowering of the CBD spliff Berry From Spliff Seeds Getting to the end of the line of this beautiful 2 plants she frosty she smells absolutely amazing and the only thing that is still going on is flushing and i hope i can cut here down Sunday will see i want the ppm to go lower for fine end result i am not going to cut corners on this grow it's looking and going to good for that 23/12/21 Run off was 1600 ppm so almost there 25/12/21 Runoff is around 700 ppm I will be now drying the pots out and then it's chop time for these 2 26/12/21 Day 58 flowering runoff 550 ppm 🤘🏻 There looking frosty smell absolutely 🔥🔥🔥 thricome are where i want them and has a day to go to dry out the soil and then light's out for 24 hours it was a perfect grow From beginning to end CBD SPLIFF BERRY From @spliffseeds 28/12/21 Chop chop 1 CBD spliff berry I have decided to do one wet trim and one dry trim so will be trimming first one tomorrow and goes into dry reck One left to chop good times Happy holidays people hope you have some great days stay healthy take care of the one's around yeah and let next year be more weed and Less fucking corona so i can get my ass to Alberta Canada for month vacation to see if we could move there 🤘🏻🇨🇦🤘🏻 visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

Harvested Around 220 Grams from 3 Plants, terps were there slightly, smoked fine, its alright, went with a differnent breeder after.

Wird sobald es getrocknet ist gewogen.

Was a nice grow from seed to harvest in 96 days. You could harvest earlier but I waited for the 30% amber.

Adding some flair* Double the fun, double the gains! Both are getting trained to perfection with 9 gauge wire, and the results are about to get lit! @demonicgenetics is bringing the heat with "Unleashing hellish gains!" - demonic genetics, aggressive growth, and noticeable changes every single day. @fastbuds420, on the other hand, is infusing her grow with a dash of Irish magic, and her strength in veg crazy!

Hey fellow green thumbs! 🌿💚 We’ve just wrapped up the fourth week of flowering with our Auto Fast Pete and Auto Northern Dragon Fuel from Super Sativa Seed Club. This week has been a mix of challenges and progress, but our resilient ladies are pushing through. Let’s dive into the details! 🌟 Week 8 (Fourth Week of Flower) Progress: Day 50-52: Bud Bulk and Stress Signs • Auto Fast Pete: Pete has bulked up significantly, with buds swelling and becoming more resinous. However, the light schedule change seems to have caused some stress, resulting in burned leaves and possible nutrient deficiencies. Despite this, the buds are looking fantastic and are still on track for a great harvest. 🌿🌸 • Auto Northern Dragon Fuel: Dragon Fuel is also showing impressive bud development. The buds are thick and sticky, but like Pete, she’s showing signs of stress with some burned leaves and potential CalMag deficiency. Her resilience is evident as she continues to push through and develop beautifully. 🌱✨ Day 53-55: Addressing Deficiencies and Adjustments • Nutrient Strategy: In response to the stress signs, we increased the dose of CalMag slightly to see how the plants would react. The goal is to mitigate any deficiencies and support healthy bud development. 🌿 • Reservoir Details: • TDS: 450 (increased slightly to boost CalMag) • Temperature: 18°C • pH: 6.2 • Environmental Conditions: • Temperature: 31°C • Humidity: 51% Monitoring these adjustments closely to ensure the plants recover and thrive. Thank you Trol Master, seriously 🌡️💧 Day 56: Observing and Fine-Tuning • Auto Fast Pete: The buds are continuing to grow and mature despite the stress signs. The plant’s overall health is being monitored closely, with an eye on the leaves and bud development. 🌿🌼 • Auto Northern Dragon Fuel: The bud sites are dense and sticky, and the plant is showing resilience in the face of stress. Continued monitoring and fine-tuning of the nutrient regimen are key to supporting her through this phase. 🌱🌟 🌟 Care Tips: • Light: Adjusted to a 12/12 light schedule, which seems to have caused some stress. We’re keeping a close eye on the plants to ensure they adapt and recover well. 💡 • Autopot System: The Autopot system continues to provide a steady water supply, reducing the need for frequent manual watering. This system is great for maintaining consistent soil moisture, which is crucial during the flowering phase. 🌊 • Nutrient Monitoring: Increased the CalMag dose to address potential deficiencies. Keeping an eye on the reservoir’s TDS and pH levels to ensure the plants receive the right amount of nutrients and minerals. 🌿 • Environment Control: Maintaining a stable temperature of 31°C and humidity around 51% to create the perfect conditions for flowering. Adjusting airflow and positioning to optimize plant health. 🌡️💧 🌟 Genetics Spotlight: Auto Fast Pete: • Characteristics: Rapid bud development, strong structure, early resin production, but showing signs of stress and possible nutrient deficiencies. This strain is still pushing through with impressive bud bulk. • Future Expectations: Continued bud swelling and resin production. Monitoring nutrient adjustments closely to ensure a healthy finish. Auto Northern Dragon Fuel: • Characteristics: Robust structure, dense bud sites, resilience, but also showing stress signs and possible CalMag deficiency. The buds are still developing beautifully. • Future Expectations: Significant bud growth and increased resin production. Close monitoring and adjustments will support a strong finish. 🌍🌿 Fun Fact: Did you know? 🌿✨ CalMag deficiencies are common during the flowering phase as the plants have higher demands for calcium and magnesium to support bud development. Addressing these deficiencies early can make a big difference in overall plant health and yield! For all the in-depth action and detailed explanations, head over to my YouTube channel! 🎥✨ I’m sharing all the tips, tricks, and step-by-step guides to help you get the best results from your grow. This week has been particularly challenging and exciting, and there’s so much more to explore and learn together! 👉 Join me on YouTube Link in my profile 👈 🌟 Conclusion: Week 8 marks the fourth week of flowering, with both Auto Fast Pete and Auto Northern Dragon Fuel showing remarkable progress despite some stress and deficiencies. The buds are developing beautifully, and with careful monitoring and adjustments, we’re set for a promising harvest. Stay tuned for Week 9, and happy growing! 🌿💚✨ #SuperSativaSeedClub #Week8Report #FastPete #NorthernDragonFuel #PlantMagic #GardeningJoy #NatureLovers #PlantPower #InspireGrow #YouTubeJourney Germination method 🌱 @thecannakan Genetics @supersativaseedclub_official Nutrition @aptusholland 🌿 @aptus_world 🌎 @aptus_es 🌍 @aptusbrasil 🌱 @aptus_thailand 🌿 @aptus_portugal 🌳 @aptususa_official 🍀 @aptusplanttechnz 🌺 @aptusplanttechaus 🍃 Ambient controls🎮 @trolmaster.eu @trolmaster.eu.support @trolmaster.support @trolmaster.agro Soil @promix_growers_eur @promix_cannabis LED - @lumatekeu Watering- @autopot_usa @autopot_global Love and attention- @dogdoctorofficial As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 More info and complete updates from all my adventures can be found ⬆️link in the profile description ⬆️ Friendly reminder all you see here is pure research and for educational purposes only 💚Growers Love To you All 💚 Discount Codes : @thecannakan DOGDOCTOR 15% off @theneutralizer PORKIT5-DOG 15% off @kannabiaglobal DOGDOCTOR 30% off @seedsmangenetics DOGDOCTOR 10%off @terpyz.mutant.genetics DOCTOR 15% off

First grow ever! Popped the seeds while still working out the kinks on the misting system. Growing in a custom built 24" x 36" x 48" fully insulated box. I've got the fans and humidifier dialed in to hold temps and humidity steady during the day and am only losing about 6°C during lights out (Depending on temperature in Garage). Everyone was sprouted in Rapid Rooters surrounded by hydroton. Right now I'm tweaking the misting system with solenoids to minimize dripping as I'd like to go water-to-waste... but without being super wasteful. Only the two autos (AKxCM and SCH) will be staying in the box for the duration of the grow. The other four seedlings are photos and will be moved to a sunny window to put on some size prior to being moved outdoors towards the end of May. I'm a total rookie, but have tried to pay lots of attention to other diaries and lots of forums. I'm sure i'll make some mistakes along the way, but hopefully ya'll will keep me on the true garden path. I'm looking forward to all your questions, comments, and nasty remarks.

The defoliation continues and continues. Buds are starting to pack on some weight. Had to start using twist ties to hold up some of the bigger buds. Still giving the bembe on water only days. Everything is progressing nicely

Once I got the 200 watt light things took off

Candy is doing well. She had a ph jump and some cal mag signs showed a little. She should be good to go now. I will be topping her soon. She is picking up the pace she is growing. Thank you Divine Seeds, Athena, and Spider Farmer. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

I've been lollipopping the plant. Things are looking and smelling good. I'm trying to maximize the vertical space of my grow room and I think I'm almost at the right height. I've been keeping the light going at 75% (of 1000w) instead of 50%, which apparently I can get away with in the winter.

Please like and follkw my diary and check out my others!! Would appreciate the support🙏 Ok guys week 4 starting now and these girls have gotten all bushy and lushy!! I am just now setting up and starting to play around with time lapses lol here are my 2 tester videos to start. Any pointers and tips would be greatly appreciated👏 Soo the girls are doing great done a little lst and neem oil applied last night for pest prevention I wanted to bend down their main stems and do a little hst but unfortunately their main stemsare waaaay to thick for it, I'll add some pics later Ok and as for feeding we are following the advanced nutrients feeding schedule, no more pirahna for now I have measured EC and PPM this time but i need to go find my notes will add it into this weeks diary Ok that's it for now I've got another time lapse running so I'll add that one later today too!

+ Day 75: Harvested !!! Now Drying !!! +

6/22 End of fist week in newly remodeled grow room! Clones did well with transfer from clone machine to grow rails. Got rid of the 3 inch neoprene Inserts for the sliced pipe insulation. Wrapping the pipe insulation around the root riot allows me to see the base of the plant and the root riot witch provides a good indication of moisture level in the rail. By zoning the high pressure irrigation, the pressure is running higher than the last round and I found my settings at 3 minutes every 30 min too much water. Added 10 minutes to root dry time to 40 minutes off. Seems to have done the trick and leaf curling has diminished. 😀 All set for new round. Get the last round of lids at greenbud.life Open enrolment till July 4th. Get signed up before then!

Day 57 and that's a 33.8oz spring water bottle for size reference. Video's are day 58. I'm going to ice water her tonight and then keep her in straight darkness for 72hrs and then harvest. She's a beast for sure. You can definitely see an increase in trichromes in the 4 days of total darkness started with it's 1st and final ice water flush abd no more water for 3 days or untill I harvest.

I'm surprised 😮 about the difference between now and last week ...they became really 😳 monsters 👻 👽 I'm very happy with this grow I can say #RipperSeeds are one of the best 👌

Están creciendo muy bien 😀!!!