Likes
Comments
Share
Germination went well - 100% success rate. Seedlings look healthy and seems to be growing well/ I'm not able to get air temperature above 18 degrees Celsius during the day cycle but I don't think that will be an issue with this strain.
Likes
16
Share
This week made a few oopsies . I gave un-ph’d water to one of the plants “moving to fast” . Started defoliation during this week to attempt to redirect plant energy into establishing a full canopy since flowering has initiated. Whilst defoliating I broke a branch that had to be taped to save it. Humidity went out of whack when I stored 4 prepped 5 gal pots for transplant in the tent sooo I’ve got to buy a dehumidifier bc at one point all my plants fell out in a fit . STILL haven’t filled these pots out, & I’m kinda sure/unsure it’s time to re-amend the soil for flowering. I’m conflicting on waiting until beginning/middle of week 7 so I can flush week 11 & 12 . I think that covers it pretty well Week 5 in the 📚 📕 📖.
Processing
Likes
24
Share
@GrowGuy97
Follow
Day 7 - 1 plant is a little behind but all In all everything seems to be going great! Thanks for following & happy growing friends!✌️🏼🌱 Day 8 - All is well! Happy growing friends✌️🏼🌱 Day 9 - Ladies got fed today! Still doing good! Day 10 - Getting bigger🌱🌱 Day 11 - Got water today at 6.5, One is still growing a little slow but overall going great!👍🏼✌️🏼🌱 Day 12- Really hoping the slow one catches up the others are growing quick! Day 13- Got water today at 6.5 PH, will get fed again Monday!
Likes
2
Share
@Grilla
Follow
I’m not 100% done collecting all the data. By the smell of it, this plant will be one of the dankest plants I’ve ever grown. More to come. Tuesday, September 5 I have the nugs in jars right now. Hopefully I didn’t let it dry too much. Right now the humidity is at around 52% but I think if I move the jar around a bit I can them to sweat a bit more.
Likes
12
Share
@TMGrow
Follow
11.01 - Watered ~ 3L with worm casting tea (2Gal water, 2 cups worm castings, 2 TBPS Roots Bloom Terp Tea) 11.02 - Solid defoliation of fan leaves and removal of bud sites below scrog 11.04 - Misted soil 11.05 - 3 L w/ 1/2 tsp Recharge - Top dressed with 2 Tbps Terp Tea Bloom
Likes
180
Share
🌈 🍨 😍😋🌞 🌈 🍨 😍😋🌞 🌈 🍨 😍😋🌞 🌈 🍨 😍😋🌞 🌈 🍨 😍😋🌞 I have no words, just that the smell is so sweet, like an ice-cream shop, and walnut. 🤤 Test bud was so good right after drying! 😬 Trichomes are cloudy, I will chop this week. So happy! 😍😌 I have been gifted by the universe once again. 🙏 I had to support all the branches now. 🍨 DAY 96 I harvested my beautiful Caramelo girl. 😍 ✨ Just took off the bigger leaves, and a few sugar leaves, my room is quite warm so no complete trim. The buds look so amazing, they are rock hard, glittery and have those bright orange pistils alongside the dark purple colors. Sigh. 😊 Drying in cardboard boxes now, I usually hang two branches in a box, with air holes. And I have one box with a net chucked inside, for the smaller parts. No popcorn with the Caramelo. 😋 Took me half an hour to trim her. After 5 days, I will put the nuggets in a jar to check the remaining humidity. I will leave the jar closed for 12h and then check. If the humidity has risen above 70%, the nugs will be put in a salad bowl to dry over night. If it's below 70% I will leave them in the jar and open it once in a while.. trying to keep humidity above 60% and below 70% for 2 weeks. 😎 Thank you so much for your company, friends!! It's so much better to grow in a community! 💚 Lighting a vape on you!! 😘 💚 🤤 💚 🤤 💚 🤤 💚 🤤 💚 🤤 💚 🤤 Have a great week!! 😘 __________________________________________________ SET UP 240W Fullspectrum LED 660nm 730nm 3500K dimmable custom exhaust fan 270/320 m³/h 3x Garden High Pro fans 5W tap water EC 0,25 - adding Calmag to EC 0,4-0,6 - adding pH minus Bloom (AHH) to pH 6,5
Likes
27
Share
Ich will auch Linda Seeds. Ausserdem muss das aufhören das sich alle Schrottlachen, nur weil ich der einzigste in der Runde bin, der noch nie N Linda Seeds grow durchgebracht hat. One day later. Laid on the ground. One day later. She opened, and a little root is shining. On day 4 after kontakt with water ill put her into soil. 20.09 23.09 BIRTHDAY 24.09 4 leaves. Healthy. Yea 25.09.... Yes Northern Lights @ Christmas. Maybe. Like last year. Lollollol 26.09. Alright baby AUTO NORTHERN LIGHT. YEAH FEEL THIS BASE. 29.09.
Likes
10
Share
@Zelfiris
Follow
She has her own room now! Inside this VIVOSUN 5x5 the canopy is being supplied with 35,000 - 55,000 lux (650 - 950 ppfd) by the spiderfarmer SE7000. I also installed a UV-B fluorescent light on a timer to run for 30 minutes before the se7000 turns on. I did some light defoliating and retied some outer branches to open up the canopy. Feeding following the general hydroponics 10 part table for late blooming/ripening - subbed liquid koolbloom for dry koolbloom at an introductory rate of 1/4 tsp/gal. Also added GH Ripen @ 4ml/gal.
Likes
Comments
Share
🌿Week 4: Defoliation & SCROG Setup Week 4 was all about structure and airflow. The canopy was getting bushy fast, with a ton of inner growth, so we went in for a solid defoliation session across the board. Lower fans, overlapping leaves, and shaded internodes were cleaned up to let light penetrate deeper into the canopy and reduce potential humidity traps. Right after that, we finally dropped the SCROG net, stretched out gently across the canopy to guide the branches horizontally and prep for flower stacking. Some of these phenos are already reaching for the sky, so the timing felt just right. Captured a full-time-lapse clip of the defoliation + netting process. It’s super satisfying watching the chaos turn into clean lines. Nature meets intention. Feed Bloom since 20/6 22/6 Defoliation 🌱 Plant Response: After defol, they bounced back fast. Tops are perky, leaves are praying, and stretch is continuing in a controlled way. The structure’s more open now — better airflow, better light distribution, better everything.
Likes
41
Share
Starting week 6 this bitch needed some magnesium and phosphorus Now she starting to get swole
Likes
5
Share
@Tidzs
Follow
28/11/2022 - Inizio della seconda settimana, ho preparato una soluzione abbastanza tenera partendo da una base osmotica, dato circa 0,5l per pianta appena accese le luci. 30/11/2022 - Eseguito topping su tutte le piante, forse un piccolo azzardo sua Cookie Kush che era rimasta un pochino indietro. Vediamo come va! 01/12/2022 - Le piante sembrano aver reagito bene al topping, oggi ho dato un "abbondante" irrigata a tutte le piante, circa 1 litro per vaso e un pò meno nei tre vasi più piccoli.
Likes
2
Share
Todo avanza adecuadamente.
Likes
9
Share
@Cannabot
Follow
Last feed of bloom and then flush.Have a very soft spot for this plant,really dense hard bud that smells so sweet.Never gave a days issue from seed.Resistant asf that's for sure.Looking forward to harvest
Likes
31
Share
Erde ist eine sehr luftige aus einem Garten Fachgeschäft, welche sehr leicht vorgedüngt ist, mit einem NPK Dünger. Möchte versuchen alles aus dieser Sorte heraus zu holen. Beigesetzt habe ich 1 Sack mit 10 Litern Plagron Perlit, welches vor der Zugabe gründlich abgewaschen wurde. Eine ganze Packung Royal Queen Seeds Easy Boost habe ich von Anfang an der Erde beigemischt. Dann wurde der gesamte Airpot mit seinen 38 Litern Volumen, einmal mit Wasser gefüllt, damit der Organische Dünger aufquellt. Dieser wurde dann mehrmals von mir durchgemengt, damit die aufgequellten Organischen Düngerteile sich möglichst gleichmäßig in der Erde verteilen. Nachdem die Erde nach über 1 Woche durchgetrocknet war, wurde diese erneut aufgelockert. Dann kam der Samen Zamnesia Banana hinein, welchen ich 4 Tage vorgezogen habe. Der Samen ist sehr, sehr Gut, da er von vorne herein eine sehr starke, praktisch absolut gerade Wurzel nach Unten gebildet hat. Das weiß ich, da ich den Samen in einem gereinigten, durchsichtigen Plastikbehälter vorgezogen habe, in dem vorher geiles Minzeis aus dem Aldi drin war. Start war der 07.11.2020. Habe Gestern das erste mal einen Hauch von dem Plagron Flüssigdünger auf 1 Liter Wasser gemischt, ca. 0,5 ml. Die kleine mochte die Dosis sehr. Mit PH Down habe ich den Wert von der Mischung auf den PH Wert 6.6 eingestellt. Lampe ist ein SMD Chip mit 65W, genauer der Cree CXB 3590. 1 Der Photonenstrom liegt bei 137,5 µmol/s, was ich für einen Einzelnen Chip in dieser Größe für sehr ordentlich halte. Auf den Wert komme ich, aufgrund der Angabe einer 4 er Lampe, die 4 solcher Chips enthielt. Diesen Wert habe ich dann durch 4 geteilt. Das habe ich wiederum getan, weil ich keine Angaben mit einem Strahlungsdruck Messwert zu diesem Chip im Internet fand, nicht einmal in dem Herstellerdatenblatt. https://proemit-576b.kxcdn.com/shop/media/pdf/b9/c8/eb/ds-CXB3590-1.pdf https://www.ledrack-growled.com/wp-content/uploads/2018/08/Produktdatenblatt18-LedRackPlusKit-TechLed_Swiss.pdf 1 Weiter im Text, dieser ist erfahrungsgemäß stark genug, für 1 Pflanze auf 500mm x 500mm. Growbox ist ein Eigenbau aus OSB Platten mit 12 mm Stärke, welche 4 140 mm Lüfter mit Vorwiderstand, welche durch ein Universales 12V Netzteil versorgt werden, verwendet. Reflektoren sind eine Rettungsdecke und Alufolie. Ich bin gespannt wie der Grow wird, denke ich werde mehrere Triebe durch Topping und später durch Entlaubung.
Likes
41
Share
HLG 350R hanging with the Mars Hydro UR45 -added a clone of a Malt Milkshake -clones I took from these plants, majority have rooted so far and transplanted