Week 11 Day 71 (15/03/2021): No time to take pics today ✌️ Day 72 (16/03/2021): Looking good but more and more leaves are drying up or turning yellow. But at this point there is definitely no point in stressing the girls by removing them. Although the colours definitely look nice! Day 73 (17/03/2021)💧: Today will be the last watering for the girls so they have a few days to take up the last bits of moisture before harvest. I can’t believe how fast this grow went but I have definitely learned a lot from it. Day 74 (18/03/2021): They look so nice and colourful, definitely an interesting bunch of girls :D Can’t wait for the harvest and cure Day 75 (19/03/2021): No time to take pics today ✌️ Day 76 (20/03/2021): No time to take pics today but harvest day tomorrow!!!! Day 77 (21/03/2021): HARVEST DAY! What a great journey it has been growing these girls. They were so resilient and only started showing symptoms of deficiency in the last few weeks. They are absolutely covered in trichomes and smell very pungent. I think they will be super hard hitters! And it still amazes me how different they all are. Echo is even completely purple! Can’t wait to trim and dry these girls and will definitely make some bubble hash from all the trichomes on the leaves too 🤤 Will follow up with a review soon! (after they’ve cured for a bit)

So were on day 26 of flower there looking good getting a nice smell starting to throw out trichomes Have down loaded a thew videos of before and after removing fan leaves

6/22/2022 Dropped into Ph 6.3 Added myco in water, 1 ml cal mag per gallon, just enough, soak for 24 hrs This is supposed to be a super vigorous mother plant, seeds are nice and plump. I have particular high hopes for seeds 6, 7, 8, 9 which seem bigger/better than the others. 4 is a runt. 1-3 are good sized. Five is pretty plump we will see. 6/23/2022 Start germination About 24 hours after initial drop in water, I placed each seed into a soaked Root Riot cube, and then back into the cup with its label. Placed lid back on tray, covered and back on heater. It's about 74 degrees F. Once they pop, I'll start the veg week, approximately 1-2 days. 6/25/2022 Last Day of germination, ready to pop I'm pretty verbose with my grows, some people may hate that. I like to show what I do for my own process, as well as to share with others. I put Hydroton into the bottom of the AC Infinity 1 gallon pots, like 2 inches. Then mixed Mother Earth Coco + Perlite Mix, Fox Farms Ocean Forest, earthworm castings, Dynamyco. Placed the root riot cubes into the substrate contained by the fabric pots -- misted with diluted Foop Spray, domed. Environment looks good. Seedling stage week starts tomorrow, yay.

Orinoco is definitely doing great. Nightingale is the indica dominant pheno Candida is getting her ass kicked by the fan. I need to move her.

Just steady growing. Day #84 1.5l of water with nutrients. Last time we gave watering with nutrients. Day #87 2l water without nutrients

Tbd

Die dritte Blütewoche startet für die Ladies und sie bekommen noch etwas Proviant mit auf den Weg. Sie bekommen jeweils 20ml Orgatrex und 1g Bactrex, gelöst in einem Liter Osmose Wasser. Ich habe den Autopots einige Tage vorher die Wasserzufuhr abgedreht, um sie nicht zu fluten. Für mehr Stabilität habe ich ein zweites Netz reingehängt. Außerdem habe ich zwei ungenutzte PC Lüfter ins Zelt gelegt um für etwas mehr Umluft zu sorgen. Desweiteren wurden einige Blätter entfernt. Die Woche neigt sich dem Ende zu und die Pflanzen sprengen das Zelt. Die Lampe hängt mittlerweile auf Anschlag.

buenas pues seguimos con la floracion donde van maravillosamente os hice videos para que lo viereis como evolucionas esta excelente marca todas van genial donde no da aun ningun sintoma pero ahora empieza los grandes problemas donde hay que controlar todo en general can comiendo muy bien pero ahora es cuando empieza lo bueno de verdad donde igual el minimo despiste te lleva al desastre espero que os guste buenos humos gente

ACTUALIZACIONES A DIARIO!! Miles de gracias al equipo de Royal Queen Seeds y a @James por proponerme esta aventura tan trepidante y poder conocer de cerca las nuevas F1 y sobre todo a la gran Titan F1. Espero que lo disfruteis y os sirva como referencia. ¿Qué piensas cuando lees la palabra “Titán”? Hay quienes la asocian con los hijos de Urano de la mitología griega. Otros saben que Titán es la luna más grande de Saturno. ¿Y entre los cultivadores de hierba? Estas personas reconocen a la Titan F1 como una variedad de marihuana con una genética de vanguardia. Se trata de uno de los primeros híbridos F1 autoflorecientes, y es una variedad pionera que ofrece productividad, resistencia y algo completamente nuevo. La Titan F1 deleitará tu olfato durante la fase de floración y más allá. Esta variedad autofloreciente ofrece un potente perfil de terpenos compuesto principalmente por mirceno, farneseno, ocimeno, pineno, bisabolol y limoneno. Gracias a MarsHydro 😊🙏 por darme la mejor luz que hay en el mercado. La marca numero uno en focos 💡, carpas de cultivo ⛺️, extractores 🌬️ y demás aparatos que necesitas para tu cultivo. Para esta aventura arrancaremos con 💡Mars Hydro TS 1000 Full Spectrum LED Grow Light 150W Regulable y 1 semilla autofloreciente a un ciclo de 20/4. Verdaderos 150w con este TS1000, la mejor luz de cultivo LED para principiantes. Ofrece una luz adecuada para 2-4 plantas 🌱. Su precio razonable, la marcada mejora del rendimiento y el control variable de la producción la hacen amigable para los nuevos cultivadores. Todo un tesoro para cualquier cultivador que este comenzando. Usaremos para esta aventura una carpa de 60x60x90, MarsHydro una carpa para los más exigentes.Con una solapa de cremallera mejorada, dobles cremalleras de metal con forro,reflectante diamante tipo Mylar, postes de metal para una estructura mas solida, no se puede pedir nada mas. Garantizando una respuesta en solo 24 horas tanto si has usado antes la marca como si no. 🌻🚀 Consigue tus semillas aqui: https://www.royalqueenseeds.es/semillas-de-marihuana-hibridas-f1/624-titan-f1.html 💡 MarsHydro TS1000: https://www.amazon.com/gp/product/B07PLY1WKK ⛺️ 60 x 60 x 90 MarsHydro: https://www.amazon.com/dp/B081PN2QDN/ Cuarta semana de floracion, las planta ha terminado de estirar, las ramas laterales han estirando junto con la cola central y se muestran los futuros cogollos, es una planta muy compacta y he tenido que quitar alguna hoja baja para evitar la aparicion de algun hongo. Se muestra el principio de una gran cola principal. Es la genetica que mejor ha respondido, por no decir la mejor. Felicidades Royal Queen Seeds y MarsHydro 😁 📅 Dia 42: Riego con nutrientes, EC 1200, come todos los nutrientes que se le aplican. 📅 Dia 43: Riego con nutrientes, EC 1050 📅 Dia 44: Riego con nutrientes, EC 1050, ya se ven cogollines totalmente cargados de resina, el olor es cítrico y afrutado, se te hace la boca agua. 📅 Dia 45: Riego con nutrientes EC 1050 📅 Dia 46: Riego con nutrientes EC 1050 📅 Dia 47: Riego con nutrientes EC 1150 📅 Dia 48:

This is when I knew I needed to go All in or Go home lol even tho I'm home already. So, I ordered a whole kit and said F it

Beginning of week.. Such weird bud structure.. Love the smell.. Fruity asf.. Since nights haven't been as cool as they were before, the colors seem to have stopped on the calyxes. The old ones are still purple, but the newer calyxes don't have any coloring.. Still a pretty mix of purples and greens.. The leaves look like they should not be an issue when trimming whatsoever.. They are huge.. Even at the tip top of the colas, so far.. The lollipopping could have been kept a node or 2 lower.. I should have nothing but massive top colas tho.. I can live with that.. Lol. I'm still finding my sweet spots with alot of things lol.. Trying to use a LUX Meter and convert to PAR to figure out how much my girls are getting. Lately, I've burned a few tops.. Not too bad.. didnt hurt the yield or trichomes too much.. But noticeable.. So I'm trying to find the sweet spot and still be able to just cut the power of the light down, lower the light toward the canopy so I can also avoid the summer heat which is coming.. So far, I can run this light at 50%, but keeping it about 14 inches above the conopy.. By harvest, I should be able to get away with 75% power at about 12-14 inches.. Just one plant and the footprint of the light is pretty wide.. So it should still get branch to branch pretty evenly.. Stoned ramblin hah! Mid week.. Wow.. These colas are getting massive! She didnt stretch much at all, if any. So, I lollipopped a bit high, in my opinion. But these colas are gonna be so massive, it shouldn't even matter at this point lol. She has ALOT of leaves and they are REALLY getting thick in there.. There isn't much airflow getting around these colas.. I should probably get a fan on there.. Or maybe defoliate a bit.. Not sure really now.. But damn, these colas are HUGE!.. they aren't very long, but holy shit there are getting so fat! Very fruity scent.. Pretty strong but still has plenty of time to get even stronger.. Wow. This autoflower is nothing like the White Widow auto.. That's for sure.. The white widow buds stay kinda small.. Airy.. They must have used a different auto to breed with.. Or maybe the white widow reg. version just isn't a big yielder.. Blah whatever.. This girl needs something changed quick tho.. Either a fan or defoliate more.. Or both.. A growmie just had some bud rot on one of his heavy yielding autos.. Never had the issue before and I don't plan on having it EVER. This is a very good, productive week so far. Next day.. I had to defoliate for sure.. And even pulled the branches down a bit more to help open her up some. I did not expect these colas to do this at all.. I even raised up my oscillating fan so that it's moving air above and below the canopy pretty well now.. Should be fine 🤞... Another thing.. The leaves are SUPER dark green.. The tops have some clawing and the leaves that are hidden away (mostly sugar leaves) do too.. I brought the FloraMicro down to .66 mL/L but I think I'm going to go down a bit further.. My last grow did this too and I went down to .5 mL/L and still ended the run with the issues.. So.. Damn.. Should I just cut it out completely? The colas are already so damn huge.. I just need them to swell up a bit and I can already tell I'm gonna be more than happy with the outcome. I guess I will just bring it down to .33 mL/L.. Eaiser to measure out that way for me too.. She shouldn't struggle or even notice any change.. The only thing I could see hurting is the lack of the Calcium in the FloraMicro.. But I'm going to see if bringing the Micro down that much will help this claw crap from spreading.. So still very happy with this run.. Not bad, ILGM.. Not bad at all.. End of week.. Yeah definitely going down to .33mL/L on the FloraMicro.. I'm sure she will be fine till harvest. No other issues should pop up. She is looking and smelling gorgeous as fuuuuck! She is already so dense and thick.. This is gonna be a nice harvest.. On to the next!...

MY SAYING NOW IS: THE ONLY WAY TO GROW IS WITH THE HYDRO🤘 AND REACH FOR THE STARS WITH MARS🤘🤣. https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA So it's been 17 days under the new MARS HYDRO FC4800 and the TSW2000 and the girls are loving it.. leaves were straight up like they were at a rock concert just blowing in the wind waving their arms like they are in the moshpit🤣🤣 looked so sweet👍. after a day they have stretched so much I had to raise the light already to keep it at 14 inches above the canopy. Plants grow so uniform under these lights, canopy is always nice and even👍. it has a whiter light than the mars tsw2000. Being side by side in my 8x8 tent, I can really see the difference in the color of light. The FC4800 is more of a white light like natural light. Its the NEW blue uv Diodes they added to the fc series lights. I'm amazed at how good this light is already. Barely any heat comes off it. I can rest my hand on it when the dimmer is at 100% and it's just warm. I have it daisy chained to my TSW2000 and it works awesome👍 and I dont have to reach for the other dimmer to do both. One dimmer controls both lights. When I add more lights I will daisy chain them too and control 4 lights from 1 dimmer👍. I still love my tsw2000. It's been going almost non stop since I got it and no issues at all. I take a picture of the Diodes to see if any have burnt out or anything, everything is fine.  same thing with the heat it gives off is just like the FC4800. I can rest my hand on it without burning me👍. Having both lights on 100% because I'm in flower now, only raises my temperature about 3°celcius. Make sure you got some calmag and if you use reverse osmosis water (bottled water) or filtered water you will want extra calmag because it's filtered out of it👍. I CANT BELIEVE the amount of crystals the plants have already🤘 they just started getting bigger hair clumps and I didn't expect to see this much already👍 awesome lights do an awesome job. So it's looking good for these strains I made👍. These lights are perfect for every stage of growth for germination to flower. Just use the dimmers to reduce the intensity of the lights for whatever stage you are in. Plus they are easy to raise and lower them with the ratchet straps. MARS HYDRO'S recommended height for different stages is pretty accurate but different strains like different Temps and light sensitivity so that's something to look into, a more Mediterranean strain can take more heat and intense lighting. and you can just follow their recommendations for the height for each stage. I slowly turn it up in the later veg cycle until I'm at 75% about a week before I switch to 12/12 and after about 4 or 5 days into flower I'm at 100% with no heat or light stress👍. Mars hydro is awesome for their pricing for what you get👍. They should cost alot more than other brands but shhhhh don't tell them🤣🤣🤣🤣. Just kidding. they want to stay competitive with every brand but there stuff is always cheaper than SF and vipar etc. They know once you use mars hydro products you won't switch to another brand. Why pay more money for something that isn't as good. I've seen lights cheaper than mars but they are cheaper for a reason. They are built cheaper. My TSW2000 is fairly heavy too. But when it comes to getting lights you want some weight to it so you know it's built strong and sturdy and will last a long time.. I called customer service a few times and they will help you out with any questions you may have about the products and they are very well educated in their products👍 very helpful and very friendly. They are awesome 🤜🤛. I can't say enough about this grow tent too. The thing is a beast. I could use the canvas tent to make a trampoline and i doubt it would break its that thick👍 I've had some cheaper tents made of 600d canvas and they aren't that bad. But when you get a tent made from 1680D canvas material it's insane how strong and heavy it is. Before I put the tent together when I lifted the canvas to start wrapping the frame I said to myself.. LORD TUNDERIN JESUS this has some nice weight to it. It was the easiest tent to put together that I've ever had. I went inside with the lights off and got someone to turn it on after a minute or two to look for light leaks and there was none👍. It even blocks out some noise, so if your fans or filters are loud, once it is zipped up it gets quieter. this tent is awesome with So many ports and vents for whatever you need to hook up to it. It has frame bars down the middle and one vertical pole in the middle to keep it sturdy but the poles are made nice and so thick that they probably didn't even need a vertical bar in the middle. It has 2 separate 4x8 floor trays that divide it into 2 4x8 tents. All you need is a mylar divider to easily divide it in half. I love the stickers it comes with. It's nothing big to some people but I know there is lots of people that like them because you see them everywhere in people's tents and in pictures. I love them they are super cool stickers👍. It really locks in the light and temperature and humidity good. Lots of room for all the equipment I have to go in it and will get to put in it. Be good to bring camping too🤣🤣🤣🤜🤛. Thanks for stopping by and taking the time to read this and please leave a comment 🙏🤜🤛 if you have any questions about any of the products I use please feel free to ask me and I can help you out👍🤜🤛 I also know about all their other products too, so any questions about stuff I'm not using I can still help you guys out🤘 and ask about pricing if you're interested in anything and I'll see what kind of deals I can hook you up with. But don't just buy stuff.. let me know so I can talk to my friends at mars hydro and probably get you a better deal👍🤜🤛 https://www.mars-hydro.com Promo code: Rocknroll Instagram: @marshydropenny Here's some more information about these products I'm using: The goal of MarsHydro is simply to produce the best value grow tents in the  growing field and they didn't disappoint me at all. I'm beyond satisfied with everything. And with the most up to date hydroponic equipment at the lowest prices possible. Their grow tents have combined all their engineers and customers' advice to produce these unbelievable tents.. they really listen to us and change things to our liking so if you own anything from mars just contact them and let them know.. they take our advice and considerations VERY SERIOUSLY so don't hesitate to let them know 💪🤜🤛 The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍 https://www.mars-hydro.com/ Promo code: rocknroll Instagram: @marshydropenny GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! https://www.mars-hydro.com         PROMO CODE: rocknroll Instagram: @marshydropenny Happy growing to all my friends 🤜🤛

A it late with the update as I broke my phone,. To say it was my 1st harvest was very pleased with the outcome, 38grams dry of mostly tight nugs, trichomes on the main colas were turning Amber so cut those down couple of days earlier and left lower nugs to develop a bit more. Cured for 2 weeks now and buds smelling and smoking great, smooth taste and full of flavour! Next crop been planted very soon.

Balanced compare tea given this week, but nothing else amendment wise and no other watering needed still. Nice stretch gone on in the first week of flowering, plant still looking nice and healthy, will see how things are looking for a defol on day 14 or so.

Week 7

🍬

She's looking really good so far and the smell she leaves on your hands after handling her, incredible! Her old fan leaves are dropping off and today is the last day I feed her nutes. It'll just be flushing from now on and checking in on the trichomes every once in a while.

12.08. Harvest day 274 g wet, 42 g dry -- 0.49 g/W I let her dry for 10 day, after this jar with a 62 % Boveda and twice a day burping for 6 weeks. Unfortunately she became a herma, more than I was aware of. No visible seeds at first, but as I was producing a tinkture I saw a lot of micro-seeds. Can't blame anyone for this beside the harsh conditions the plant experienced in life. Beside this the grow was an adventure with a very strong plant. Overall the yield in total is more than expected. Unfortunatly I had to reap her, because I ledt for holidays. About 1 week more would be helpful - anyways she is potent enough. I can recommend this strain. Very easy grow, strong, resilient and absolutely no smell during grow/bloom.

9/18: I harvested one of them. Washed and hung to dry. 9/21: I harvested a couple more. Washed and hung to dry. 9/23: I harvested the last one. Washed and hung to dry. 10/7: I smoked some. I liked it. 10/8: I smoked some more. I'm really glad I have almost 15 ounces of it.😋 a) 69g b) 79g c) 93g d) 84g e) 88g Final thoughts: Easy to grow and train. The two I did some training on produced the most. The buds are dense while growing and remain so after they've dried and started to cure. They redden up beautifully in the jar and have a very mild but sweet minty/flowery smell that comes through in the flavor as well. It's a very strong Sativa buzz which is surprising considering they were the fastest FFT's to finish...among mostly Indica varieties. Potency: 8/10 Yield: 8/10 Flavor: 8/10 Aroma: 8/10 Bag-appeal: 8/10 Trouble-free: 10/10 NOTE: I couldn't find the photos I took of the first one I harvested, but it was the smallest (and stinkiest) of the bunch.