Recommended
Likes
Comments
Share
I like to take CBD especially in the form of oil but we thought of growing some CBD autoflowering both for medical use, for cooking etc. and to send to the most anticipated contest of the year in terms of autoflowering, the annual Barcelona autoflower world cup. Our Green Cure F1 Hybrid Automatic seems to be just right for us, let's see if it throws fire. Growing projects for autoflowering plants ----- As for autoflowering plants I really love preserving the Main Cola. So I will try to make the plants grow well or badly without affecting the main cola. Nowadays topping autoflowering plants is very accepted but it is not my favorite thing to transform a baby born to finish in 10 weeks into a baby that finishes in 14, I say at this point I do photoperiodic. But in times of people who only grow autoflowering everything is permitted for goodness sake if you want to do it, do it I won't be the one to stop you. Also because the results are excellent nothing to really discuss about anything except time. All this to tell us that I recommend for example fimming on plants that tend to grow tall to give power to the lateral branches, LST as much as you want, I don't like too much spread out I need space. HST and splitting are with experience. These are my tips not the absolute truth please do not mistake me for a great wise holder of the truth I speak as I see it. The first week went only with Power Roots 1 Ml/l and Pure Zym 1 ml/l from now on we will start with ALga Grow. The plants were transplanted shortly after germination because the biodegradable pots were very small. The soil is Plagron Pro Mix 100% organic renewed with 30% new soil and 20% Perlite added. (Pro mix has no perlite but is airy, we added it anyway) Plagron nutrients are available at Zamnesia in convenient pack formats for all growing styles. I used this one with a simple search you can find the other products. ---- https://www.zamnesia.io/it/12119-plagron-top-grow-box-100-naturale.html Try a seed of this strain that drives us crazy... ---- https://www.zamnesia.io/en/10672-zamnesia-seeds-green-cure-cbd-f1-automatic.html Zamnesia Description // Zamnesia's breeding team has harnessed F1 genetics to bring you Green Cure CBD F1 Automatic. This autoflowering cultivar is easy to grow, accessible and reliable for all levels of experience. Ready in just 11 weeks, growers can expect impressive yields of tasty buds with a clear-headed effect that's ideal for meditative moments. Growbox and Air System - Secret Jardin DS120w + fans + exhaust fans and filters DF16 kit ---- https://www.secretjardin.com All the best that mother nature has to offer is at ----www.zamnesia.com Collaboration request: I am available for collaborations with companies of lights and various growing equipment (please no seed and nut companies) I would like to renovate my 120x120 space that has slightly outdated lights and I would like to try some controllers. If you have any proposals available.
Likes
18
Share
7/17 she is SUPER fucking frosty 😍💚 buds are filling out too. Cant wait to see her a couple weeks from now 7/21 she was getting super bushy so I defoliated alot of the bigger fan leaves
Processing
Likes
14
Share
@rainman
Follow
Week 5 start, no signs of flowering yet, very strange. But i think it will start in next 2-3 days. Overall previous week was very good and productive, plant grew double or triple size. Let's see what this week brings. Day 30 - Its hard to see on a photos, but scrog is doing a great job and theres a lot of bud sites. Some are covered by big ass leaves, but i check it and fix as often as i can. Will get some better pictures and video tomorrow. Day 32 - Decided to give plamt a flush right before flowering, so it can start with some fresh roots. Plant is growing really well, will need some leaves cut. 4L with FloraKleen. Day 35 - Flowering is going full speed, will cut some leaves tomorrow, as they just block a lot of light. Almost no smell. 4L with nutrients. Peace.
Likes
56
Share
Bueno!!!! hay una punta, Justo la que da en el centro de las dos lamparas que tiene un tono más amarillo que las otras, pareciera una deficiencia de magnesio pero en las hojas más jóvenes, pienso qué hay un exeso de luz en esa zona entonces decidí apagar 50w de cálidos para ver si mejora, próximo riego voy a hacer run off para ver si no estoy sobre fertilizando y creando un bloqueo de nutrientes. La planta se ve saludable pero no de un color correcto cómo está su hermana. 19/04 Se encuentran pulgones negros en el piso de la carpa, muchos. Se pulveriza con aceite de neem y bioprotect. Además se colocaron muchas trampas cromáticas con fabricadas en casa con aceite de giralsol Se riega con 2 litros de agua (50% grifo + 50% Osmosis) + 2ml de cal mag de top crop PH: 6.4 con el nuevo medidor ya! EC:0.9 21/04/2022 se pulveriza foliar ambas plantas con Big One 1ml x L PH: 6.4 antes que se apaguen las luces y empiece la noche 22/04/2022 se riega con 2,5 litros de agua (2000cm3 osmosis inversa + 3000cm3 de la red) + 3 ml de Cal-Mag para reforsar el calcio, se baja el PH del agua a 5 y se agrega BioEnhancer de Green House Feeding 1 Gr x Litro
Likes
18
Share
Barney's Farm es increíble Kush Mintz simplemente espectacular, linaje critical x kush no tiene fallo posible, y si ya la cruzas con una mintz.. muy buen trabajo breeders, cogollos duros como rocas y buen tamaño Toca secar y valorar todo en unos días 😜
Likes
12
Share
@MrVic98
Follow
Ok starting to look nice. I’ve realised my TDS meter calculates a low ppm given the EC therefore I’ve been thinking my PPMs are lower than they probably have been thus the burning leaves. From now on I’m going to use the EC reading of my meter as that is what it actually measures. I’m not sure how long left as this is my first plant. I have a handheld microscope I can use to check the crystals but there don’t seem to be any good spots to get in and use it on easily at the moment, I don’t want to damage the buds too bad. Finaly made a rig that allowed me to raise my light even more as it was too close and I had run out of room to go higher. Its been a funny plant a far as I can tell. Took a long time to flower but is pretty large and seems pretty healthy. Keen for the harvest. 😀 A few weeks ago I changed my nutrient ratios to the ones fourth last on the chart (B...) in the photo and have used it at a watered down rate for the plant. Credit for the recipe: https://www.420magazine.com/community/threads/nutrient-recipes-formulas-guidelines-implementations-and-thoughts.201278/post-1860223
Likes
6
Share
@w00tGrow
Follow
fattening those buds with big budd but not really glad, seems like they are not proogressing much from week to week any advice? or maybe just little paranoic ))
Likes
8
Share
Day 63 What a turn around! Got my watering issues manageable. Last watering for Candace I added Mykos and Azos to my water. Switched from SimPro to Terp Tea. #GIRTH # FROST #AROMA Sheryl got that same recipe tonight. Candace didn't need water, but I splashed about 8oz in her dish for the bottom roots. Take Away? It's a weed so it's resilient. Have patience, don't panic, let the plants tell you what they need. Came back from out of town and the girls were looking famished. I put 1Tbl of Terp Tea Bloom in a gallon of rain water with Mykos, Azos, and Fish Sh!t. Fed both plants half gallon each.
Processing
Likes
18
Share
Heavy defoliation the day before the photos were taken. Will leave alone now to stack and mature for a month. Feed regularly. *(If anyone has seen the little blue heater that I use in the room in one of the photos or videos, I noticed a tiny LED on the side. Since it was daylight when I tested the heater and it's so small, hadn't noticed that it turns on when the heater is activated. It is red and I think that it's intermittent off/on/off during flowering was having an effect on the plants on the right side where the light is. Put duct tape over the light and hopefully, that's that, although if the element inside glows red and lights up the room, I may have to deal with it).
Processing
Likes
21
Share
Switched from 24/0 to 12/12 at the end of day 14, also switched the 730nm Led's on. Its been 7 days the plants have started growing a lot faster but there's still no pistils showing. I started feeding biobizz grow @ 2ml/l At the moment there getting watered every 3-4 days. The light is showing 25000lux on a lux meter app.
Likes
8
Share
Likes
11
Share
Ready for a week of water only. Really frosty buds and extremely fruity terps. I did hit he with a little dose of PK before the flush which looks like it has helped.
Likes
2
Share
Likes
11
Share
@Novagrow
Follow
This stuff has taken an age to dry! I think it was a little too cool in the tent. ah well. Its currently in jars curing, so havent had chance to try it out and i think im prepared to give it a full 6 weeks of cure. Results wise, little disappointed by the yield, only 4oz but it was a micro grow - I think perhaps although i didnt notice it at the time, the heatwave fortnight i had during flower may have had something to do with the lack of growth - but still the quality of the buds is high, plenty of trichomes and buds are really dense. As its still in cure its still a bit hay-smell as the chlorophyll continues to work its way out but there are lovely undertones of gas and fruit - (cherry?) Will check back in with a smoke report in a few weeks but wanted to get a couple of vids of the buds (yes i dont trim them like the pros, i dont care :p )
Likes
32
Share
Applied the scrog net, two layers so far so top layer mainly for repositioning and support. Trying to fill 1.5m2 (5x5) is a big task but seems to be going well so far. Had some slight magnesium deficiency but correcting it over the next few feeds.
Likes
31
Share
This was the last photos and video I took before I chopped them. One of the girls started to yellow on the sugar leaves quiet badly!
Likes
41
Share
The girl is progressing well. She is receiving around 25 DLI of light. I did a topping.