Likes
Comments
Share
@ibbzy
Follow
Ahhhhhhh such beauties! And they’re starting to frost uppppp 😍 Will update with a few more shots in few days
Likes
43
Share
@sleeve
Follow
Start of week 8 and have moved over to just oxygenated water and 1mg of mammoth P per gallon for the finish. Buds have started to really fatten up the past couple of days. Thanks for coming in and having a look, the finish is near!
Likes
5
Share
@Ozgrow
Follow
Pheno 1 produced 12 o and pheno 2 was a terrific yielder producing 16 o. Very happy with quality and yield.
Likes
5
Share
@k0nz1
Follow
One plant has some calcium deficit Defoliation Smell slightly getting stronger Buds getting bigger
Likes
16
Share
@GYOweed
Follow
It's getting bigger. If i dont flip to flower i think in fucked but didnt get a clone yet :(
Likes
5
Share
@Ibgrowing
Follow
She has grown a lot since last week so i did some more lst. I think that she has almost reached full growth potential if she hasn't already. The bud development is starting to ramp up. I also removed a few leaves I watered once with 2,5l of rain water and another time with 3l. There were some very hot days (32-38 °C) so she had to be in the shade a lot of the time.
Likes
98
Share
I guess I first have to extend a big thank you to James and the folks at RQS. The genetics of their “Northern Light” did not disappoint and this was a no fuss grow across all categories. This will be the only time you hear me refer to Northern Lights in the singular. It’s kinda like calling a “pickerel” a “walleye” - you just don’t do that up here😉. She took well to training, showed no signs of lockout or deficiency, and we were at the top limits of botanicare’s recommended feeding schedule the whole time. I’d call this typical NL - the scent wasn’t overly powerful, she grew somewhat squat and while I’m actually very surprised at the final weigh (thought it would be much less), the whole grow was typical of the strain in my experience. Possibly her biggest limiting factor was simply space constraints. The photos pretty obviously demonstrate that she got really crowded out by the neighbouring kush and I wouldn’t be surprised at all if she’d have done a little better with some more room. That said, what isn’t “typical” are the effects. RQS touts this as a cup winner and I can see why. Had the opportunity to sample a little and WHOA! She Hits with a lasting, cerebral and euphoric effect that starts as a light, happy high. Not a crippling or dulling effect at all. Just everything you’d expect from a well rounded strain in general. Perfect. I almost wanna describe it as a classic sativa but I’ve been smoking nothing but a pure indica for so many months now that anything different is gonna feel that way 😂. Thank Christ for some new stash diversity: 1:! Many, many thanks to all those who cared to comment, suggest or converse on this one. It’s been a pleasure hearing from everyone and I did what I could to keep ‘er interesting : 1:. Next up will be a couple autos on RDWC before the summer outdoor season (and a significant indoor upgrade) is upon us. That said, I still might be outta touch for a little while due to “life developments”. All the best with that quality smoke folks😉: 1:😜! Seeya on the flip side.👊😎0
Likes
6
Share
Great finish to a fantastic run with this cultivar! terps were citrusy gas and sweet earthy. the smoke is thick and smooth with a earthy sweet and a little gas flavor. very nice. made some gassy smelling dry ice sift hashish. Never throw away your trim!!! it's the ultimate bonus to any harvest. this was a combined White Truffle and Trop Cherry Gas hashish. Finished up with 12 ounces of flower and 36 gr hashish
Likes
14
Share
Posting the phenos when I do them
Likes
Comments
Share
Flowering going very well, ph-6,5 ec 1,4 salt 0,04% at runoff . Everyday 3 to 4 feedings with Canna around 1,5 liter per day.
Likes
7
Share
She’s looking great! Little slower on the flower. Getting frosty and has nice structure. Perfectly healthy plant. Have a dose of the plagron green sensation this week and last
Likes
9
Share
Scratch what I said at the end of last week pests are still around just had some bug fly at me and bite/sting me on the neck now a got a welt on my neck smh, not sure what the heck it was it was some sort of black bug maybe a thrip but I honestly have no idea, did another neem oil drench on the medium only and tomorrow I'm going to use a hydrogen peroxide mixture again that way I can also use it on the tops and undersides of the leaves as well. Some of the roots started to become exposed on the top soil so I added more an inch or two coco to cover the exposed roots. Another successful week I guess the plants aren't dead so onto week 9, Week 4 of flower
Likes
7
Share
First week of flower, looking good so far in the first few days. Really noticing it stretching out and the tops are popping more now. Very excited to see the whole flowering process. The bloom nutrients when mixed with the kelp and calMag brings it to exactly 6.5pH I used to have to use pH up with the grow and down still for straight water as my tap water is 8.3pH Added in a Friend (Bloody Skunk Auto) for a hydroponic grow but took out a few days later and moved under my desk to give it a 24hr light schedule to help get her going and move back in after a week and leave in there. Plant has been doing fantastic this week, no longer seeing any issues. New growth looks great. She's looking really good. Been watering 4L every two days and feed every 2 waterings. Using CalMag with straight watering feeding. 540ppm (baseline tap water is 298-320ppm) Adjusted second fan to blow better on the very top. Haven't adjusted the lights and let the plant grow to it within 30cm distance as recommended by spiderfarmer. Will start to raise next week as plant grows taller to maintain the distance. No signs of tacoing so just leaving where it is.
Likes
9
Share
@Headies
Follow
So I have spider mites. I screwed up so much i think this is going 15 weeks. Lost coast to the rescue! time to finish these buggers off
Likes
Comments
Share
Für die Dancing Sprite gab es diese Woche das erste Topping und ein klein wenig Entlaubung. Die Seitentriebe entwickeln sich langsam in Richtung LST. Dadurch, dass ich ein paar der Blätter entfernt habe, sollten sie sich recht rasch nach oben strecken. Den Abstand zur Lampe hab ich ein wenig nach oben angepasst, um den Wachstum etwas mehr anzuregen.
Likes
5
Share
Commence a sentir le raisins et la pamplemousses extra résineuses.
Likes
70
Share
So this is how things are looking for the Dark Phoenix at the end of Week 8 of Flower. I have uploaded a video for you guys with all the information you need, any questions just ask away 👍🏾🌱💚
Likes
9
Share
DID SOME MAJOR DEFOLIATION TO SLOW THE GROWTH ABIT. IM GOING TO PUT THE 15 PHOTOPERIODS IN THE 8X8 TENT TO FLOWER BUT I NEED TO HARVEST THE AUTOFLOWERS FIRST. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
7
Share
Alcapulco Gold plants (3) are between 12”-14” and still receiving only pH balanced H2O. The other 2 strains are receiving nutrients listed above.