It was hard with the nutrients now it's good !!

Bis auf das Problem das es in unserer Region Arsch Kalt ist und ich im Grow Temperatur Probleme habe läuft es gut. Die Ladys haben eine gesunde Farbe und sie sind in der Vorblüte. Leider musste ich eine Gorilla Glue entsorgen, die andere Erholt sich gerade. Bin mal gespannt was aus ihr wird. Da ich noch sehr Unerfahren bin und ich bei meinen ersten Grow durch ein Zwitter alles zerstört habe bin ich mir nicht sicher ob auch jetzt einer dabei ist. Habe ein Bild hochgeladen. Vielleicht kann mir ja jemand sagen ob ich mir Sorgen machen muss. Bis jetzt läuft es Überraschend gut. Beobachte Die Lady weiter und hoffe das es kein Zwitter ist. Glaube aber nicht. Den anderen Damen geht es super.

Seems like she just needs maybe a week or max 2 weeks to finally be done. Unfortunately another whoopsie happend. Due to storm winds I put her inside for 2 days. On the day where I wanted to put her back outside, I was gone for 30 seconds and one of my rabbits did catch one of the two biggest branches. I trimmed it ready for drying.

using purple cow indicanja soil. 1st time. will add Gaia green 4-4-4 on top later if needed. 1st 6 are starting to sprout. other 8 in 1 gals were planted today. keeping canopy at 12k lux for now whatever that means... but I bought one of the cheap meters to get a rough estimate on light heights in different tents. will raise the lux throughout life cycle. unsure if ill grow them all or just the ones that look best into next transplant.... we will see

(3.8.22) Day 21 of flower. Watered each plant 2.5L of nutrient mix. POST NUTE FEED RUNOFF LEVELS: Plant 1: 1605ppm, 6.2ph Plant 2: 1367, 6.6ph Apprehensive/not sure how to go about further defoliation. I’ve removed everything from below the net, and taken away every fan leaf that looks like it’s not directly connected to a bud site. Everything that remains appears to be connected to a bud site. Do I need to remove more? On one hand, I’m afraid that I’ll end up stressing out the plant this far into flower. On the other, I’m afraid of possibly running into PM at some point. RH is increasing with the warmer weather (between 45-55, 65 on a rainy day). Lots of little leaves laying on each other. Thinking about getting a small dehumidifier to put into the tent. Also, just going forward with future grows, should I have removed every branch that grew out of one of my mains? If you look at the photo below the net, I’ve got my main branches and all those little stems that branched out seem to be what’s really causing the crowding. I thought the point of LST was to have it do exactly that, but looking at everyone else’s grow it looks like they just limit themselves to the big main branches and clean up everything else. (VIDEO) I've got two 6" fans. One at the bottom right under the net blowing up, one at the back left above the plant (but slowly being taken over) blowing down. Everything in between seems to be dancing around with air. It being my first grow, I'm not sure if I'm not doing enough or overdoing it lol (post script): For plant 1, the scrog net is only 8 inches above the soil. With plant 2, it's only 5 inches above the soil. I was so concerned about the plant "possibly doubling or tripling in flower" that I really LST'd my plant early on and did my best to level her out. As a result, I was able to fill out the perimeter of my tent easily, but there was not much vertical growth to speak of. This meant that when I put my scrog up, it was barely above the rim of each pot. Next time/grow, I may experiment with letting the plant get a little more height before leveling her out? Idk/not sure. Also, my light placement was close enough that my node spacing was VERY tight. I've read that this is a good "problem" to have, but I can't help but thinking if my plants had a bit more verticality to them they'd be easier to work with. (3.10.22) Watered both plants with 2.5L of ph'd water. Was a bit lower than I would have liked at approx 6.2ph, ppm was 83 Post water runoff: Plant 1 - 6.2ph/1248ppm Plant 2 - 6.3ph/776ppm

Not much to report this week. She's starting to smell more funky like that good dank stank. Before it was all pine and citrus scents. You can catch a whiff without having to rustle with it. Her buds are stacking nicely and looking THICK thick. I think the next few weeks are gonna be just that.... fattening up and ripening. Her colas are nicely shaped and even the bottom "popcorn" nugs feel dense. Def bigger than popcorn nugs I've seen. Anyways here's the update on her, I hope you enjoy following the grow! Happy Growing 😊

What a week!! I am going to do some tie downs and put up the net today or tomorrow. I also flipped it to 12-12 today. Flower time! Ok so I had the lights way to close. I raised it up at least another 12" and also turned it down to 65%. Everyday I raised it a little more and kept seeing an improvement. I only saw signs of light burn not heat burn. I guess this light has some power! My smart plug says it's running at 660w now. Can't wait to see the flowers in about a month!!! Let's

Hi all, sorry for the delay, all continues to go very well, she is handling the nutrients very well wit only a very little tip burn. I increased the light a little bit, as I felt that some of the main colas on the side didn't get enough light. Next week I will probably be able to show the little veg-box I built, since the cuttings are slowly outgrowing their current home.

_____📅 Week 8 | 📅 Day 50 - 56 | 17.06 - 23.06 ____________________________________ 🌼🌸🌺Pre-flower🌼🌸🌺 23.06.25 | Day 56🌞💧 🔸This week I wanted to stress my sweetys as little as possible, so only a few photos from the tent. They are standing perfectly straight and I didn't want to break or snap anything off. They are doing great. 🔸I tried out my additional light this week and connected it to my controller. As soon as the flowering starts I will switch it on. I'll have to see how much distance I use this time, the lamps were too close to the plants during the last grow “Runtz” and that didn't look nice. 🔸Next week I will start giving her Big Bud as soon as the first buds appear. 🔸Poison Envy: Would say the stretch is not over yet, very slight hairs on the nodes can be seen...it's definitely all ladies :D She is now over 35 Cm so in a week she will be 10 CM stretch, let's see when she is ready. _________________________________________________________________________________________ current conditions: 🌡️🔆= 24° 🌡️🌜= 18-19° 💨 Hum. = 65% 🔦 PPFD = 600 umol 12/12 🔦⌚DLI = ~ 25 _________________________________________________________________________________________ equipment to use: 💡 Light: 2 x Sanlight Evo 4- 120 on 60% ⛺ 120 x120 x 180 🍯 Pots: 18 liter pot 🌱 Soil: Bio-Bizz light mix 💊 Nutrients: Advanced Nutrients 💧 Water: Tap Water 0,5 EC _________________________________________________________________________________________

She's an octopus full of very stinky sweet nuggets man!. I'm in love with this black cherry punch #1 she's in a 30l pot and her performance has been amazing. Very happy with this lady. The aroma of the flowers is suuper sweet very like cherry and like strawberries. Such a pleasure to grow this Cherry pie 🥧🍒 cross 🔝💎👨‍🌾 PD: I had to tie some of the colas cause they were just Fallin cause of the weight of the nugs. A set of 2 branches broke because of the weight of the nuggets so I chopped it down the 2 colas and put them in the drying room.

The ladies don't seem to be hungry that much. I slightly introduced them for the first time with some nutrients from General Hydroponics and CalMag.

420

AutoFlower/Outdoor Vine plants, Big Budz at 3 weeks of Bloom and Outdoor Flowers Blooming Update! Everything looks Gorgeously Great and looking Beautifully Grown at their 7th Week of Flower! Outdoors Update! 3rd Feed of #HumboldtCountysOwn #AutoWhiteRussian and #AutoMontreal *Fems* breed by Team #DivineSeeds #DivineSeedsSquad #DivineSeedsBreedingCompany Looking Magnificent and Amazingly Great in thier 7th week of Flowers! Thier Growing under the #Growatt600w and in my #TopoLite 24×24×48 Grow Tent! I'm also using #TNBNaturals #TheEnhancer Co2 Despersal Canister and using thier Ph⬆️⬇️ for my Decolinated Tap Water! #AutoWhiteRussian breed by Outstandingly Awesome Team #DivineSeeds #DivineSeedsSquad #DivineSeedsBreedingCompany Yo!!! This Lil Beauty popped open in under between 16-18 hours of Germination using this Wet Papertowel Method, this New Heat Mat, Baked potato ToGo Container and Regular Tap Water Helped Tremendously! Heck Yeah Growmies and Growmets!!! Let's Grow!!! DivineSeeds: #AutoWhiteRussian Origin:Afghanistan Type:Indica/ Sativa/ Ruderalis Flowering:65 days THC:24 % Harvest:400-600 g/m2 Height:100-150 cm #AutoMontreal breed by Top of The Line Team #DivineSeeds #DivineSeedsSquad #DivineSeedsBreedingCompany Yo!!! This Lil Beautiful Bean Popped under between 20 hours of Germination using this Wet Papertowel Method, this New Heat Mat, Baked potato ToGo Container and Regular Tap Water Helped Tremendously! Heck Yeah Growmies and Growmets!!! Let's Grow!!! DivineSeeds: #AutoMontreal Origin:Canada Type:50% Indica/ 40% Sativa/ 10% Ruderalis Flowering:65 Days THC:23% Harvest:550-750 g/m2 Height:120-160 cm https://divineseeds.net/ https://instagram.com/divine.seeds?igshid=osxe2v7en33v HumboldtCounty'sOwn: Email: [email protected] Phone: (707) 725-4119 Toll free: (866) 872-9434 Humboldt Bottling Po Box 429 · Fortuna, CA 95540 HumboldtCounty'sOwn Website Link: https://humboldtcountysown.com/ HumboldtCounty'sOwn Instagram Link: https://instagram.com/humboldtcountysown?igshid=1qj809qkkwych I love and Appreciate Everyone!!! Thanks Again Teams! Cheers Famz!!! Much Props and Much Topz!💯

02/23/2022 Lots of stretching this week,not much to say so I let the pics and videos talk for them selves🙏🏻 Enjoy Grape Skunk tall and lanky one I'm loving! I will number her for future reference. Biscotti Skunk has some droopy leaves, it's watering day.

Changing and cleaning resevoirs this week will update with new nute ratios soon looks like the plant affeced by whatever it was is bouncing back nicely i think this is my first grow so comments and tips are very welcome i wont be doing any training this time as its the first grow and i had a few problems early on and didnt want to slow things down more then already were

Ok so another frustrating week! So this week I re potted her and moved her into "the big house" under new lights (GN Telos 0010) set at 70cm from canopy and perfect environment controlled by temp and humidity equipment. Now because of the cal mag deficiency I buffered the coco 2 times in an 8 hour soak in 150% calmag solution ph'd to 6.1 prior to transfer. Then after draining and getting to the correct temp I moved her to the new pot and topped with a light A+B feed. A day later I fed with the nutrients listed which includes 1ml/L of calmag and again the same the following day. Run off ph is spot on at 6.2-6.4ph, although it was 6.6 when I checked today and growth is great but this damn limegreen cal mag deficiency seems to be continuing. At this point I am hoping it's damage already done that didn't show when the leaves were young. The bottom leaves dont seem to be getting worse and some of the reddening on the stems has gone so fingers crossed this next week will see a change in green because I'm out of ideas, apart from making a foliar mix and trying that I'm stumped! The only thing I can think of is a flush incase of a nutrient lock out but I cant see that being the case as her nutes have been light. Even now with all the nutes she is getting the EC is only at 1.4. Thanks for reading, any comments/tips welcome as always. Happy growing!

Gave more Sucranat frying leaves and light burn. Finishing up Forbidden Runtz soon as she is chucky. Hoping she'll put on more weight, if not oh well. Sour Stomper is catching up and feeding more now. She's starting to fill out a bit. She's still 6 days behind her sis but doing alright.

This weeks been hectic! Iv had a lot of training to do and a fair amount of defoliation - all only done until my plant had no feed left. Iv signed up to a couple of patreon accounts : ‘Willymyco’ and ‘DGC - dude grows podcast’s. Another great podcast. However, over the past week there’s been a heatwave and I accidentally pulled the red on/off plastic valve from the res for a second , it’s all good and just went on insulated wires…so I just mopped it up. I changed it to a mars hydro ts-1000w, and then the ts-600. Glad the dimmer works though or temps will be insane! I am still thinking of putting in the fc-e3000 but if I do that I’m going to have to take out the stoppers from the ends and hacksaw some off. It’s only cheap aluminium and then I’m going to think about removing one of the light strips if I can. Then I’ll just keep it low. It’s still weird working with a plant they suggested, un-topped— this is the first time i have done this in my life - I have literally always - HST’d, using the early veg stage and making used of the time for it to heal.