Big s/o to @42fastbuds the genetics are solid 😎😎

Germination 19/08 Topped 10/09 LST 13/09 Transplant 27/09

Was bummed out plant got red mites at the end but that’s fine, it didn’t not impact the grow (or at least I didn’t notice.) Harvested at the end of the 6th week of flower. Trichomes had already started turning amber due to heat degradation (couch lock party) what trichomes that were not dust ridden or amber was milky so I’d say it’s ready. Choosing the best time to harvest is still puzzling for me due to the fact that this is my 4th time harvesting cannabis. Thanks for reading... more info to come ...TBC

SOME SEEDS ARE STARTING TO POP OPEN AFTER 1.5 DAYS SO I WILL PROBABLY BE PUTTING MOST OF THEM IN THE SOIL ON APRIL 23RD👍 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

I brougt them outside when the weather Was good enough. Sie stams got mutch more resistent. Will transplant them to soll in a few days. Night temp. is not lower than 7 degree Celsius. Got a little smell when you put your nose very close to the top leaves, but nothing to intensive.

Week went well. Did some major defoliation because it was getting very bushy I couldn’t even see the main stem. Also used some flex wire to LST the lower branches and the twin top. Had a bit of a hiccup where I didn’t water on a day that I should have apparently and it wilted a lot. But I just watered the crap out of it and it bounced back. More evidence of the strain’s (or at least this pheno of the strain’s) resiliency. Debating on whether to top all the lower branches. Feel free to weigh in in the comments below if you have an opinion on that. Feeling like I should. Also going to need to figure out how to raise this light higher, the pulley system that it came with is as high as it goes, so I’ll just have to juryrig something for it.

fantastic smells coming out of the tent! The purple punch smells delicious. The sour diesel smells dank. The girl scout cookies smells like GSC

Week 16 Day 109 and 62 in Flower today 😍 Their Mama went into dark on Day 62 of Flower, so I checked their trichomes today. They all look nearly finished, at least the top buds are all good to go. I will wait another day or two and then they will go into darkness. Next weekend will be a good time to harvest yeay ☀️ They have been fed a little water every two days for the last couple of days. Humidity has dropped quite a bit in the tent but it's still hot. Luckily temperatures are going down a little bit. Can't wait for my little rainbows 🌈 ❤️ Day 111 and 64 in Flower, one last day with light 😍 Added some trich shots of one the clones. Good call to send them into darkness. And guys, the colours aaaaaaaaaaaaah 😍😍😍

Day in and exit fan 15 min off 15 min on Van is full on Night in and exit fan 30 min off 15 min on Van is off Lst tranings return Nutrients started 0.5gr/1L at day 21 400ML Per Pot Day 24 Grow powder 0.75gr/1L Short Flowering 0.5gr/1L 400ML Per Pot Day 26 Grow Powder 1.5gr/1L Short Flowering 1gr/1L 600ML Per Pot Day 28 Grow Powder 1.5gr/1L Short Flowering 1gr/1L 600ML Per Pot

Week 6 update: What up Grow family. These testers are growing fast and strong. Where in week 6 now and the swelling and ripening of flowers are going amazing. Still feeding 500ml/16oz daily as I've found that's the sweet spot for 3gal fabric pots for these. I'd say these probably have about 2 weeks left until they'll be finished. All in all Happy Growing.

it's only the beginning on week 6 and are in flower stage, tree looks good loving her feed, loving her space just loving life. Today I decided to put her outside in the sun such a beautiful Sunday it was, I'll keep this updated with more pics by Saturday on the closing of week 6 .

Mais 2 semanas para a colheita,ela está gorda e cheirosa,vou começar a fazer o flush ,Super Moby Dick --LATITUD SUR SEEDS.

Day 97 Mon PH 6.0 EC 0.6 DLI 12h PPFD Water 24c Day 98 Tue PH 5.0 - 5.8 EC 0.6 DLI 12h PPFD Water 18-24c Day 99 Wed Add water and ph up PH 5.3 -:5.8 EC 0.6 DLI 12h PPFD Water 18-24c Day 100 Thu PH 5.8 EC 0.6 DLI 12h PPFD Water 18-24c Day 102 Sat PH 5.8 EC 0.6 DLI 12h PPFD Water 17-24c Day 103 Sun PH 5.8 EC 0.6 DLI 12h PPFD Water 16-24c

The weight is coming guys

Reducing the water supply.

Getting a little tight for space, the tobacco and kush has filled the grow space to capacity. The clone i took from the kush has taken well, will be interesting to see what she produces.

Going into the last week of feeding and the girls are looking great! A couple of the plants have a little nute burn on some of the leaves from being pushed a little too hard. Other than that everything else is looking green and healthy. The girls are stinking up the place with an earthy, floral, funky, gorilla glue smell. Almost ready to start their 2 week flush. Cheers everyone!

I'm taking a break from recording and posting daily timelapses. Going for surgery in a few days. Will have help but not to document.

So far so good . Flowering is in full swing . It’s turning out to be a nice looking plant . Not really much smell yet but I’m sure it will be stinky